Arc Touch Mouse Scroll stops working

Anonymous
2011-04-26T13:22:53+00:00

Hi,

I'm using Win 7 (32 bit) with the MS arc Touch mouse software and drivers installed. Running on HP TX2 Touchsmart Tablet.

I'm facing a problem with my mouse with regards to the scroll function.

After "switching on" the mouse, there is a green led light and everything seems to work. The green LED then disappears, presumably to save battery.

However, after a short period of time, the scroll function will not work at all. There is no scroll "feedback" felt from the scroll strip either. But when I flatten the mouse and turn it back on again, everything works as per normal.

But after some time, the same problem resurfaces. Then, I have to turn the mouse off and back on again. Sometimes, the scroll function "turns" itself back on automatically. But most of the time, it just stops working altogether.

This is very irritating. It seems nobody else have encountered this issue.

Please help!!

Windows for home | Previous Windows versions | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

209 answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2014-11-19T12:40:09+00:00

    I tried this and it does not work.

    The touch strips stops working ten times a day and I have to turn the mouse off and on again to make it work.

    I am returning the mouse as it is clearly defective.

    Was this answer helpful?

    0 comments
  2. Anonymous
    2014-10-02T11:08:56+00:00

    Fixed the problem for me - tried tweaking it and seems to be ok on lowest vibration setting too so far.

    Was this answer helpful?

    0 comments
  3. Anonymous
    2014-09-16T16:30:15+00:00

    Hi Guys, 

    I assume that there is a problem with the motor, as AFS84 mentioned. Anyway, the clicking sound was annoying me. I had the same stopping/dropping the scroll issue, and I hope it can be fixed by software.

    My solution:

    1. Download the Mouse and Keyboard Center  from http://www.microsoft.com/hardware/en-us/p/arc-touch-mouse#support.
    2. Install it, and start it.
    3. Click on the "Touch strip"
    4. Turn "Vibration/Sound" to Off.

    At least I don't have the sound and it seems that it is fixed the scrolling issue. 

    Hope this helps some of you.

    Hi,

    sorry to say but - it doesn't work.

    I also installed the MaKC and turned Sound of - no difference.

    Was this answer helpful?

    0 comments
  4. Anonymous
    2014-09-01T16:53:48+00:00

    Hi all,

    I have the same Problem and am quite bored to wait for MS to fix this issue.

    However, as I decided to use this mouse instead of my bt-mouse (which worked great btw) I keep on using it with this Workaround:

    If the scroll"wheel" Fails to respond, just unfold (deactivate) the mouse and fold (activate) it again....works at least for me and have not read this anywhere above.

    Was this answer helpful?

    0 comments
  5. Anonymous
    2014-08-16T13:37:28+00:00

    I've owned the mouse for a couple of months before it started to act up. I've noticed that that the touch strip would work again momentarily if i flipped the mouse upside down. After fiddling around with the mouse i found the best solution is as follows:

    1. open up the mouse by removing the screws under the batteries (under the label0
    2. pop the mouse open

    3)the top part you will find the motor responsible for the strip vibration.

    1. all i did was take a small piece of paper, fold it up to a certain thickness( lots of trial and error though) and put it under the motor so that when the mouse is closed the paper would push on the motor and keep it in place. keep trying with different sizes as not to interfere with mouse button clicks.
    2. reassemble mouse.

    That's all. the mouse has been working flawlessly for a couple of weeks. hope this helps. let me know hos it goes.

    Was this answer helpful?

    0 comments