Problem in network Windows 11 24h2

Anonymous
2024-10-02T19:40:22+00:00

After updating to the new Windows 11h2, some machines experienced network issues with both cable and Wi-Fi. They connect but don’t get network access and receive an IP address starting with 169…, resulting in no internet or network connection. I updated drivers, firmware, and reset the network settings. The machines’ MAC addresses haven’t changed. Does anyone know what could be causing this?

Windows for home | Windows 11 | Install and upgrade

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

269 answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2025-06-27T10:00:02+00:00

    Thank you so much. This setting worked perfectly well for me.

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments
  2. Anonymous
    2025-04-10T01:47:48+00:00

    So I had wonky network issues with windows 11 multiple times , most recently it was telling me on a hardwired staic IP system that I was not connected to a network, but had internet cappabillites. I could go to the "network" and it would say not connected to network , but then show me my internal network devices. it would also not give me the option for public / private settings, as it thought I was not connected. LONG STORY SHORT, I found if you configure network setting in Win 11 from the new = SETTINGS / NETWORK & INTERNET page. THEY will most likely have issues , at least in the last couple builds. THE FIX, was to go to the old settings "control panel" / network & sharing / change adapter settings !!! And config your settings there ! fixes many network issues ! SEEMS MICROSOFT , has not sufficiently stopped using the old settings or successfully rolled them over to the new. hope this helps. I spent weeks trying to fix this and turns out it was simple THANKS MICROSOFT

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments
  3. Anonymous
    2024-10-07T16:53:33+00:00

    in my case the service WLAN AutoConfig service is running... the strange is if I use another router (Ruccus) or my Xiaomi as WIFI hotspot, everything works well... :/

    Was this answer helpful?

    0 comments
  4. Anonymous
    2024-10-07T16:23:36+00:00

    Stop me if I am off on something out there, but what I am seeing is that the WLAN AutoConfig services is not running, when I try to start it, Comes back with Error 1068 The dependency service or group failed to start.

    I have tried a number of things and nothing yet has worked.

    Thoughts?

    Try to see all dependency for this service if is running.

    Was this answer helpful?

    0 comments
  5. Anonymous
    2024-10-07T16:02:40+00:00

    I have the exact same issue. No wifi in the system tray, device manager shows the wifi adapter is enabled but control panel shows it as disabled. If you enable from control panel, nothing happens. If you disable in device manager and then enable it in device manager, control panel then shows it enabled. However, if you refresh the control panel window - it had immediately disabled it. Can't run troubleshooter because it just tries to troubleshoot ethernet. I, too tried a full network reset after going through control panel and device manager.

    So ... is not a DHCP server issue for sure.

    Was this answer helpful?

    0 comments