Having Bluetooth Stuttering Issues on Windows 10

It's so interesting that this thread has been going on 2 years, is monitored by MS, and they still can't fix such a simple, universal problem. Do better MS.

FIX!

Found at MadWebskills and worked perfectly for me!

Step 1: Press the Windows button just beside the Alt and Spacebar buttons.

Step 2: Type "Control Panel" and open Control Panel

**Step 3:**Under"Hardware and Sound" click "View Devices and Printers"

Step 4: Find your device from the list and right click it.

**Step 5:**Click "Properties" then select "Service"

Step 6: From this menu you will see an option called "Hands-free telephony". Untick this.

Step 7: Hit "apply".

Step 8: If your device is connected, now disconnect and reconnect/connect. Device should proceed to run normally.

[Instant fix for me and worked straight away. Computer seems to decide the device is a hands free calling device instead of a headset and incorrectly reads it.] Hope this worked as easily for you too!

I believe I found a fix just now. I also was having the audio shutters on both bluetooth headphones that I own. This is what I did:

1. Go down to the taskbar & to the sound icon on the right-bottom. Right-click to bring up the menu & select "Open Sound Settings"
2. Go to where it saids "Sound Control Panel" on the far right & click it.

3.  There should be two of the same bluetooth headphone devices that you want to play audio from, A Headset & Headphone version. Disabled "Headphone" device & leave "Headset" device enabled.

4. Test the audio of the Headset version to see if it works from here as well by right clicking the  headset device & click Test.

5.  Go back to the taskbar & click the sound icon. You should be able to select the Headset version of your Headphones & the audio should be good to go.

On Windows 10:

Control Panel --> Hardware and Sound --> Devices and Printers --> (your speaker name)

Then click the services tab, and uncheck "Serial Port (SPP) 'LWACP')

So far, it hasn't stuttered. Hope this helped because I was also fed up with the constant cutting in and out from my Megaboom 3.

Tried all the solutions in this thread - none of them worked for me.  

In my case, i had to use a workaround - doesn't solve the problem but does make life a bit easier. 

I had the same headset paired with both my laptop and pixel 3.  Even though it wouldn't be active with my phone when paired with the laptop - the phone still seems to be "pinging it" - causing a stutter every 3 seconds or so.  

the workaround was to turn off Bluetooth on my phone when using the headset with my laptop.  This works for me, as i'm never in a situation where i need it active on both.  

Not an ideal fix, and not even an acceptable fix if you need both devices on Bluetooth at the same time - but worth testing to see if it at least fixes the stutter.