Windows 10 Stuck on “Restoring your previous version of Windows” loop

Thanks the problem was solved.

I have the same problem and i can’t access the sign in screen either. Its stuck in a loop.

Today my pc stuck on this loop where it’s on the screen that says "Restoring your previous version of Windows", after few minutes pc restart automatically, same screen after restart.

I did restore my system:

1. On a working PC download the media creation tool.
2. Insert blank USB drive (minimum 8 GB of disk space).
3. Run media creation tool --> select Create installation media for another PC --> Choose a language, edition, and architecture (64-bit or 32-bit).
4. Follow the steps to create installation media on your USB drive, and then select Finish.
5. Insert USB drive into wrecked pc/laptop --> boot pc/laptop from USB drive.
6. A window popped up "It looks like you started an upgrade and booted from installation media. If you want to continue with the upgrade, remove the media from your PC and click Yes. If you want to perform a clean installation instead click No." --> click No.
7. press "Shift + F10" to start Command prompt
8. type and run command: bcdedit --> on my broken pc it looks like:

Windows Boot Manager

---

identifier              {bootmgr}

device                  partition=C:

description             Windows Boot Manager

locale                  xx-XX

inherit                 {globalsettings}

default                 {default}

resumeobject            {f6e7318d-e1b2-11e7-bc60-fb4b29351c09}

displayorder {default}

{f6e7318e-e1b2-11e7-bc60-fb4b29351c09}

toolsdisplayorder       {memdiag}

timeout                 0

Windows Setup

---

identifier              {default}

device                  ramdisk=[G:]$WINDOWS.~BT\Sources\SafeOS\winre.wim,{fa627a96-a076-11e8-b8f8-94de80cdf216}

bootstatdevice partition=G:

custom:11000083         partition=G:

path                    \windows\system32\winload.exe

locale                  xx-XX

bootstatfilepath $WINDOWS.~BT\Sources\Rollback\WinPE\bootstat.dat

inherit                 {bootloadersettings}

osdevice                ramdisk=[G:]$WINDOWS.~BT\Sources\SafeOS\winre.wim,{fa627a96-a076-11e8-b8f8-94de80cdf216}

custom:21000152         partition=G:

systemroot              \windows

nx                      OptIn

bootmenupolicy          Standard

winpe                   Yes

Windows Boot Loader

---

identifier              {f6e7318e-e1b2-11e7-bc60-fb4b29351c09}

device                  partition=G:

path                    \WINDOWS\system32\winload.exe

description             Windows 10

locale                  xx-XX

inherit                 {bootloadersettings}

recoverysequence        {b59ee861-e1b3-11e7-bc60-fb4b29351c09}

displaymessageoverride  Recovery

recoveryenabled         Yes

allowedinmemorysettings 0x15000075

osdevice                partition=G:

systemroot              \WINDOWS

resumeobject            {f6e7318d-e1b2-11e7-bc60-fb4b29351c09}

nx                      OptIn

bootmenupolicy          Standard

9. mark and press Ctrl+C for copy to clipboard your own identifier code of your previous functional Windows 10 from previous step, in my case: {f6 e7318e-e1b2-11e7-bc60-fb4b29351c09}
10. type the following command and press enter: bcdedit /default {your own id of previous Windows 10 installation}, in my case: bcdedit /default {f6e7318e-e1b2-11e7-bc60-fb4b29351c09}
11. close the Command prompt window --> unplug USB drive --> restart pc/laptop

I hope this will help you.

THIS IS IT! 

Thank you so much. This fixed my PC. 

Everyone, try vavik's command prompt bcdedit fix. I'm back up and running thanks to this. You are a legend! 

Cheers

Not working :(

I have seen the error loop a few times and what seems to work is

1. Power off the laptop.
2. Power on the laptop.
3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off.
4. Repeat this process 2 or 3  times until you see the "Preparing Automatic Repair" screen.
5. Now you want to let the laptop boot to the "Automatic Repair" screen.
6. Click "Advanced Options" and then select "Troubleshoot".
7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system.
8. From here just follow the screen instructions until the recovery is completed.

Hope this helps