cannot use windows update on windows 7. 32 bit. keep getting code error:80246008 ? cannot detect a system update readiness tool on my computer. ive ran SFS/SCANNOW and its come up with nothing ? tried downloading the system update readiness tool in standalone and i get an update hotfix for windows hotfix KB947821, whick goes to initialising installation but does not install ? any suggestions please.... would be very much appreciated.... cheers

Ok. Try this one: http://www.microsoft.com/en-us/download/details.aspx?id=34624

Neil Odd. It may be the result of downloading and installing a single update but I thought you had tried that. Select Start, Control Panel, Programs and Features, View Installed Updates and check whether KB2719857 is listed. If yes i would remove it and try downloading again. If not there try downloading: http://www.microsoft.com/en-us/download/details.aspx?id=34631 hi, i looked and KB2719857 is not listed.... i clicked on the link you sent and i noticed that this is for a x64 computer... mine is a x32 bit ......

Neil Odd. It may be the result of downloading and installing a single update but I thought you had tried that. Select Start, Control Panel, Programs and Features, View Installed Updates and check whether KB2719857 is listed. If yes i would remove it and try downloading again. If not there try downloading: http://www.microsoft.com/en-us/download/details.aspx?id=34631

Neil KB2538243 is a replacement for KB2467174 http://support.microsoft.com/kb/2538243 Select Start, Control Panel, Programs and Features, View Installed Updates and check whether KB2467174 is listed. I would remove KB2467174 and try downloading and installing KB2538243: http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=26368 I would like to see whether this one can be fixed before considering the others. ok.... there was no KB2467174 listed. the was also no KB2538243 listed.... i followed the link and installed the visualC + 2008 update download.......

Windows Update issue, getting code error: 80246008

Answer accepted by question author

Anonymous

Let's get a little wayalong to the solution.

There is a configuration error with your BITS service.

Please COPY all the lines between the ++++++++ (but not the ++) and paste into a Notepad window.

Save the file as BITS.REG to your desktop.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BITS]

"DisplayName"="@%SystemRoot%\system32\qmgr.dll,-1000"

"ImagePath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\

74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\

00,76,00,63,00,68,00,6f,00,73,00,74,00,2e,00,65,00,78,00,65,00,20,00,2d,00,\

6b,00,20,00,6e,00,65,00,74,00,73,00,76,00,63,00,73,00,00,00

"Description"="@%SystemRoot%\system32\qmgr.dll,-1001"

"ObjectName"="LocalSystem"

"ErrorControl"=dword:00000001

"Start"=dword:00000002

"DelayedAutoStart"=dword:00000001

"Type"=dword:00000020

"DependOnService"=hex(7):52,00,70,00,63,00,53,00,73,00,00,00,45,00,76,00,65,00,\

6e,00,74,00,53,00,79,00,73,00,74,00,65,00,6d,00,00,00,00,00

"ServiceSidType"=dword:00000001

"RequiredPrivileges"=hex(7):53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,47,\

00,6c,00,6f,00,62,00,61,00,6c,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,00,\

67,00,65,00,00,00,53,00,65,00,49,00,6d,00,70,00,65,00,72,00,73,00,6f,00,6e,\

00,61,00,74,00,65,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,00,67,00,65,00,\

00,00,53,00,65,00,54,00,63,00,62,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,\

00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00,6e,00,50,00,\

72,00,69,00,6d,00,61,00,72,00,79,00,54,00,6f,00,6b,00,65,00,6e,00,50,00,72,\

00,69,00,76,00,69,00,6c,00,65,00,67,00,65,00,00,00,53,00,65,00,49,00,6e,00,\

63,00,72,00,65,00,61,00,73,00,65,00,51,00,75,00,6f,00,74,00,61,00,50,00,72,\

00,69,00,76,00,69,00,6c,00,65,00,67,00,65,00,00,00,00,00

"FailureActions"=hex:80,51,01,00,00,00,00,00,00,00,00,00,03,00,00,00,14,00,00,\

00,01,00,00,00,60,ea,00,00,01,00,00,00,c0,d4,01,00,00,00,00,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BITS\Parameters]

"ServiceDll"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,\

00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,\

71,00,6d,00,67,00,72,00,2e,00,64,00,6c,00,6c,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BITS\Performance]

"Library"="bitsperf.dll"

"Open"="PerfMon_Open"

"Collect"="PerfMon_Collect"

"Close"="PerfMon_Close"

"InstallType"=dword:00000001

"PerfIniFile"="bitsctrs.ini"

"First Counter"=dword:0000086c

"Last Counter"=dword:0000087c

"First Help"=dword:0000086d

"Last Help"=dword:0000087d

"Object List"="2156"

"PerfMMFileName"="Global\MMF_BITS_s"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BITS\Security]

"Security"=hex:01,00,14,80,94,00,00,00,a4,00,00,00,14,00,00,00,34,00,00,00,02,\

00,20,00,01,00,00,00,02,c0,18,00,00,00,0c,00,01,02,00,00,00,00,00,05,20,00,\

00,00,20,02,00,00,02,00,60,00,04,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,\

00,00,00,00,05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,\

20,00,00,00,20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,0b,\

00,00,00,00,00,18,00,fd,01,02,00,01,02,00,00,00,00,00,05,20,00,00,00,23,02,\

00,00,01,02,00,00,00,00,00,05,20,00,00,00,20,02,00,00,01,02,00,00,00,00,00,\

05,20,00,00,00,20,02,00,00

+++++++++++++++++++++++++++++++++++++++++++++++

Once saved, close Notepad.

right-click on the BITS.REG file you just saved, and select Merge from the options list.

You'll get a couple of warnings - accept them.

You should get a 'Success' message.

Reboot

now open an Elevated Command Prompt Window and COPY AND PASTE the following commands

NET START BITS

SC QC BITS

SC QUERYEX BITS

post the results.

0 comments

Windows Update issue, getting code error: 80246008

145 additional answers