Surface Pro 3 USB DVD/CD drives and getting them to work together

Anonymous
2014-06-23T01:12:01+00:00

Have a Samsung USB DVD drive. My Surface Pro 3 will "see" the drive for purposes such as copying files and folder or photos. It will also play a much CD if placed in the drive. However, if I place a DVD or CD with software to install the Surface will just loop and cycle - making a little sort of beeping noise, and that's about it. The device also sort of disappears when this process is going on. I've fiddled around with the AutoPlay settings and nothing seems to make this happy.

I was able to install some of the software I needed by copying the CD info over to a USB hard drive and then running the Setup from there. But, just can't get the machine to run them from the DVD.

I'm new to Windows 8.1, so this probably isn't helping me figure this out. I get the feeling I just have something set wrong somewhere, but I sure can't figure out what it is.

Thanks

Surface | Surface Pro | Display and screen

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2014-07-22T10:52:43+00:00

Even with a powered USB hub the device can still not get enough power, depending on the device.

What I had to do for my LG DVD LG DVD drives is use a split USB cable. One connection to the device and two USB connections to the hub. The two connections are one for power and one for data. This works great and can be reasonably purchased from 'MONOPRICE.COM'. I don't remember if the SP3 charger has a USB on it, if not you will need a hub. If it does then put on USB port on the SP3 and one on the charger port.

Was this answer helpful?

50+ people found this answer helpful.
0 comments
Answer accepted by question author
Anonymous
2014-07-01T18:28:31+00:00

I have had the same issue. The USB3 port on the SP3 isn't providing enough power. Until a fix is provided in the form of a firmware updated, (maybe or maybe not) get yourself a usb3-y cable. Plug the secondary USB cable into the charging port on the AC power adapter.

Was this answer helpful?

20+ people found this answer helpful.
0 comments
Answer accepted by question author
Anonymous
2014-06-25T22:23:59+00:00

Is this happening with the SP3 plugged into an AC source?

Does the DVD have a separate power supply?

If it doesn't have an external power supply, the SP3 port might not produce enough power to run it.

Was this answer helpful?

4 people found this answer helpful.
0 comments
Answer accepted by question author
Anonymous
2014-06-23T01:57:41+00:00

The drive does not have enough power for what you want it to do.  It does for a few basics but when installing software, the drive has to maintain a fixed RPM level.

I had a Samsung USB DVD drive before and I think mine had an additional dongle on the end to hook up to another USB port for additional power.

I would basically suggest to just continue doing what you are doing by transferring the files onto a USB pendrive and install from there.  No moving parts; no additional power needed to operate.  It would be a one time function anyhow and not worth changing the drive for.

Was this answer helpful?

1 person found this answer helpful.
0 comments
Answer accepted by question author
Barb Bowman 80,805 Reputation points MVP Volunteer Moderator
2015-03-02T22:00:04+00:00

my LG external cd/dvd drive acts as if it is being disconnected and reconnected multiple times while i am trying to access files on the optical media. the surface will make its disconnect noise, the folder will close and then it will make the connected device noise and open the folder again. This will happen in the middle of trying to install a program and will error the installation out. I have tried two different drives and they both act the same way.

Try using a POWERED USB hub, or try a Y cable that can plug into the USB charging port on the SP3 power brick. There probably isn't enough power from the USB port on its own.

Was this answer helpful?

0 comments
Answer accepted by question author
Anonymous
2015-02-26T20:38:38+00:00

You actually have a "powered" USB hub now.  Look on your power brick for the Pro 3.  You will see a USB port.  If your DVD writer has a "Y" cable, plug the main plug into the tablet and the "branch" cable into that USB port on the power brick.  That will give you the power you need.

Normally, DVD writers are USB 2.0 (Blu-Ray 3.0 only) but newer models are coming out with USB 3.0.

As for external powered USB hubs?  Any model you want.  They are not technical and are just normal hubs with an external power supply.

There is a chance that the problem you have is the drive does not have enough power to operate.  Just use the power brick and try it out.

Was this answer helpful?

0 comments
Answer accepted by question author
Anonymous
2014-11-07T23:37:48+00:00

I thought I'd reply that this problem now appears to be fixed, and I don't have any problem with the USB3 ports on my docking station.

The problem seemed to be resolved after I applied the several Microsoft firmware updates, so make sure you download them all!

Was this answer helpful?

0 comments
Answer accepted by question author
Anonymous
2014-09-19T09:22:00+00:00

Hi all,

just made a discovery: the previously non-connecting external hard drive USB 3.0 now connects, but only when the Surface Pro 3 is connected to power with its power lead.

Although this may be annoying on the road, at least I can now use the drive when power is connected.

David

Was this answer helpful?

0 comments
Answer accepted by question author
Anonymous
2014-09-17T17:05:08+00:00

I am having the same problem as everyone else: my external HDD won't work. It's a 750GB USB 2.0 WD. Even when I plug it into the Surface Pro 3's docking station it won't work.

Ah, finally got it to work: I connected the HDD to one of my monitors, which have powered USB ports, even though they are only USB 1.0.

Was this answer helpful?

0 comments
Answer accepted by question author
Anonymous
2014-08-26T09:47:24+00:00

It will support external optical drives, BUT, the USB port is underpowered.

Make sure that the external drive has a "Y" cable and you will need a powered USB hub to provide the extra power to the drive.  Once you do that, the tablet will support most drive models on the market.

Was this answer helpful?

0 comments
Answer accepted by question author
Anonymous
2014-08-07T12:02:11+00:00

I purchased a Samsung Ultra Thin Portable DVD writer.  I am trying to load a parts program to use on my surface Pro 3.  The SP3 keep saying that it doesn't have enough power.  It is plugged into the ac adapter.  SE-218

I have the same USB writer.  I purchased the following USB Y cable

http://www.amazon.com/StarTech-com-USB2HABMY1-Cable-External-Drive/dp/B003WV5DMO/ref=sr_1_1?s=electronics&ie=UTF8&qid=1407412485&sr=1-1&keywords=USB2HABMY1

Note that it is USB A to mini B, since the Samsung SE-218 uses mini USB cable.  Also note that my version is only 1 ft, which is relatively short, but I like it since there is less to carry.  They have a 3 ft version.  I plug the red one into power supply of the surface pro 3 and it works.  I can read and write to DVDs.

Was this answer helpful?

0 comments
Answer accepted by question author
Anonymous
2014-08-06T22:33:16+00:00

The DVD drive is what does not have enough power.  On the DVD writer, is there a "Y" cable attached to it.  One end goes into the tablet and the other can be plugged into a regular PC or laptop and it is designed to provide more power.

If the DVD writer does not have a "Y" cable, it won't work.  There is no other way of boosting the power.  The USB 3.0 port has a fixed power output to provide to devices.  It cannot be increased.

Was this answer helpful?

0 comments

301 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2015-07-23T21:19:04+00:00

    If the USB 3 port "meets" industry standards, then why is it that so many people are having trouble getting peripherals that work on other machines to work on the SP3?   I don't know who told you that the USB 3 port meets standards Barb, but they were are either a liar or an idiot.  I escalated this problem and was told that the port was "intentionally" underpowered to increase battery life at the behest of their marketing division. I was also told that if I didn't like it that was just tough, because that was the way the machine was intentionally designed and therefore the customers would just have to learn to live with it.  This irritated me sufficiently to write a letter directly to Nadella.  As expected, I got no response.   I also contacted LG with regard to this problem and they told me they were aware that the port was underpowered on the SP3 and that their units were manufactured to spec and they didn't intend to release any devices that could be under driven just to cover Microsoft's butt.  So, there you have it.  The wiz kids at Microsoft have their own ideas with regard to what consumers need and right or wrong, they intend to force them upon us. 

    And I agree with you, Windows 10 is not only going to as much of a mess as what we have today, it has the trappings of being an even greater one.  And you can bet that good old MS is knee deep in the same stuff as our over zealous security agencies and that this new OS will be a conduit for everything on your computer via forced updates.  I now have in the neighborhood of 430 updates on the SP3 amounting to close to 5 GB of new code.  What is wrong with that picture?

    Was this answer helpful?

    0 comments