Repeated BSOD after firmware update - Surface pro 3, Windows 10

Anonymous
2015-09-30T05:24:22+00:00

Hey everyone

There was a firmware update for the SP3 I just did and my device now seems completely bricked. When I boot it, I instantaneously get a BSOD with one of those two messages : kernel security check failure or driver unloaded without cancelling pending operations.

The BSOD tells me I have to use a win10 device to boot it from, but when I tell the BIOS to boot with my USB win10 key, it doesn't and keeps telling that the OS can't boot and to use a win10 disc (no CD reader on the SP3). Nothing I've tried works so far. 

I've had my sp3 for just over a year and I really liked it before windows 10, and I really hope I can get it fixed.

Thanks for your help, 

Émile

Surface | Surface Pro | Install and update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2015-10-01T02:21:41+00:00

MODERATOR EDIT (10/5/2015): Steps listed here previously are now updated to the following.  If you receive a blue screen error after installing the 9/29/2015 Surface Firmware Update please start at step 1 to address.

Step 1 – System Restore Point

1.    Boot Surface using USB recovery media.  If you do not have recovery media you can download from here: http://www.microsoft.com/surface/en-us/support/warranty-service-and-recovery/downloadablerecoveryimage.  Once you have recovery media proceed to next steps.  Note:  The USB drive must be formatted to FAT32 (not NTFS) in order to work correctly.

2.    Press and hold the volume-down button while you press and release the power button.  When the Surface logo appears release the volume-down button.

3.    When prompted select the language and keyboard layout you want.

4.    Select Troubleshoot, then Advanced Options, followed by selecting System Restore then select the target operating system.

5.    In System Restore, click Next.

6.    Click on a system restore point that was prior to applying the System Firmware update. Please use a restore point 9/28 or earlier.

7.    Click Next.

8.    Click Finish.

9.    Click Yes when asked if you want to continue.

10.    After moving to an earlier restore point you should boot into Windows.

If you were able to restore to an earlier restore point you should now be able to use your Surface again, no additional steps are needed.  If you were not able restore to an earlier restore point or you did not have a restore point then continue to step 2 below.

Step 2 – Safe Mode

1.    Boot Surface using USB recovery media by pressing and holding the volume-down button while you press and release the power button.  When the Surface logo appears release the volume-down button.

2.    When prompted select the language and keyboard layout you want.

3.    Select Troubleshoot, then Advanced Options, followed by selecting Command Prompt.

4.    Type the following command in the command prompt and then press enter:

               bcdedit /set {bootmgr} displaybootmenu yes

5.    Type the following command in the command prompt and then press enter.

               exit

6.    Press Turn off your PC.

7.    Press the power button on Surface to turn it on.

8.    Press F8 when the Windows Boot Manager screen comes up to go to Startup Settings.

9.    Press “4” to enable Safe Mode.

10.    Surface may do disk checking as well as perform a scan and repair.  Surface will then restart.  If Surface does not do this and instead boots into Safe Mode, go to step 13.

11.    Press F8 when the Windows Boot Manager screen comes up to go to Startup Settings.

12.    Press “4” to enable Safe Mode.

13.    Surface will start in Safe Mode.  Sign into Surface.  Press the Windows Start Menu, press Power and select Restart.

14.    Press Enter when the Windows Boot Manager screen comes up to boot into Windows 10.

15.    Surface will start normally.  Sign into Surface.  Right-click the Windows Start Menu and click Command Prompt (Admin).

16.    Click Yes to allow this app to make changes.

17.    Type the following command in the command prompt and then press enter.

               bcdedit /set {bootmgr} displaybootmenu no

18.    Press the Windows Start Menu, press Power and select Restart.

If you are now able to boot into Windows you should now be able to use your Surface again, no additional steps are needed. If you were not able to boot into Windows then continue to step 3 below.

Step 3 – Reset Surface to factory settings

1.    Follow the steps in the article below to boot Surface using USB recovery media and reset Surface back to factory settings: http://www.microsoft.com/surface/en-us/support/warranty-service-and-recovery/usbrecovery

Please let us know how it goes.

Thanks,

Josh

Was this answer helpful?

0 comments

187 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2015-10-01T01:05:19+00:00

    My Surface will not boot from the USB drive. Did you do anything special to get your machine to boot from USB? My machine is setup properly for this but for whatever reason it will not boot from it. The USB drive light flashes so there is power to the port and the USB drive works as I've tested it in other machines.

    Was this answer helpful?

    0 comments
  2. Anonymous
    2015-10-01T01:00:59+00:00

    I have the same problem, but I've managed to get system back into useable state by booting from Win10 USB stick and using System Restore from there. Curiously enough, the restore itself ends with error, but after reboot Windows is able to boot. I've tried to use instructions from this page https://support.microsoft.com/en-us/kb/3073930 to disable firmware update, but it's not shown on the list of things that can be disabled. I've disabled update KB3093266 that came up at the same time with firmware update, but I was able to disable that update (not sure if it's related to the problem or not since MS decided that we - their customers - are too stupid to be given a choice of installing individual updates, so I can't install that KB update without re-installing firmware update).

    From what I can tell, the firmware update itself is OK, but it also updates some drivers which are actually causing a crash.

    Was this answer helpful?

    0 comments
  3. Anonymous
    2015-10-01T00:55:44+00:00

    As soon as we receive an update or a workaround, we will share the information with you.

    Ben,

    Not to be flippant but what am I supposed to do between now and then? This machine is my laptop and I need it to work. This was supposed to be a benign firmware update and it has bricked my over $2,000 machine.

    Was this answer helpful?

    0 comments
  4. Anonymous
    2015-10-01T00:54:38+00:00

    Wiz,

    Please email me barb AT msmvps DOT com so we can get a support case opened and get you hooked up with an engineer. They'd like to work with you.

    Was this answer helpful?

    0 comments