BrusbSib.sys incompatible driver

cannot read chinese no translator here.

after windows reset and right full package installation(PC-Fax) unchecked-from here old driver comes the problem brother confirmed) and core protection enabled the problem reoccurred.

forgot to use brother removal tool before installation. in reality only register-entry is removed.
one can print with remaining if installed brother-print-elements.
ok after that i saw coreprotection could be enabled. restarted.

then i chose brother i print and scan and yes printed had to be choosen again.

solved.

dont know what will happen when i am going to Brother utilities. could try. maybe there lies the corpse too.

the files which stop core protection to be activated are coming (back)if during full package-installation one is using default and not custom-installation PC-FAX unchecked.
if normal command doesnt help this is the forced one:
C:\WINDOWS\system32> pnputil /delete-driver oem94.inf /uninstall /force /reboot
2. I suspect finding the file in repository with autoruns(part of sysinternals or as single) is only working when used in admin.account or after brother removal tool was used. must be tested. i didnt find mine.
it seems removing the oem.inf file with force-method was enough.
"after precise deinstallation of brother-software Core-isolation still blocked by this driver.

everything found it. i need allowance by system to remove. how to do? windows 10.

C:\Windows\System32\DriverStore\FileRepository\brpom17a.inf_amd64_35497c253f5ddb29\amd64\BrUsbSib.sys"

Attention its not what you will see but similar looking. oem-filename will differ. and location of BrUsb.Sib-sys-

Windows10からのWindows11にアップグレードした場合　古いドライバーがドライバーストアに保存されます。これを削除しようとしても

”xxxxxxの許可が必要です”なので通常ではファイル操作が出来ません。アクセスが出来る様に権限を変更し削除してもWindowsセキュリティに

情報が残ったままなのでPCを再起動してもエラーは解消しません。また brotherのドライバーやアプリをアンインストールしても上記の部分は

消す事が出来ませんでした。結局 Windows11を新規にインストールして古い情報を消し去った方法が一番良かったです。

＊Windowsセキュリティが古いドライバーを認識出来ずエラーを出していた様です。

その後　エラーも無く正常に動作しています。ありがとうございました。

Windows11の初期化で全て解決が出来ました。

ありがとうございました。

1. try to activate core-protection. then you will see BrUsbSib.sys further down will be listed the oem-inf file (s)which must be removed. will try to post a detailed solution when i am going through all the steps mentioned here.
2. the problem is these files are hidden. link above.
3. brother told diabling pc-fax when packed is installed(in custom mode only) was the solution. but after installation i still saw a new oem-inf-file(if i dont err) which had to be removed. there are numembered consequitively oem1.inf oem2.inf etc.