Delete EFI partition on external drive.

Anonymous
2024-06-18T13:31:49+00:00

I've been having problems regarding SSD cloning. Macrium have been very helpful. It appears that I'm booting from the 2 installed internal hard drives (!?!).

It was working OK for ages but obviously something subsequently has happened.

It was recommended I clone to an external drive.

Fortunately I had a another SDD that I could use. I reformatted this and connected externally . Checked with file folder that it could be read and was empty. All good.

Used Macrium to clone but was concerned that if supposedly booting form 2 internal drives, what am I copying, and would it work?

It didn't!

Both drives had 3 partitions; An EFI System partition (100MB), Windows 11 Home partition (465 GB) and a Recovery Partition ((610MB)

To cut long story short, the external drive now consists of 2 partitions, The EFI partition and an unallocated partition.

The external SDD is no accessible !!. I get the message "You currently don't have permission to access this folder" and continuing, "You have been denied access to this folder" " to gain access to this folder you will have to use the security tab"

Don't understand what to do next.

Using Disk Management and right clicking on greyed out EFI partition gives a greyed out window

Can anyone help in getting this 'external' drive accessible again ?

Windows for home | Windows 11 | Recovery and backup

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

107 answers

Sort by: Newest
Most helpful Newest Oldest
  1. Anonymous
    2024-06-22T17:02:54+00:00

    Hi Remesh,

    Bit late in replying as mulling over what I should or could do.

    Noting that Disk 0 is the one which is in use currently, although the boot files in Disk 1 are being used, I ideally would like to totally use disc 0 including boot files

    Thanks for your input on how I can achieve this.

    My dilemma is that the the disk 1 image is significantly out of date compared to the current use disk 0.

    Is it possible to for boot files of disc 0 to be used ?? Would that partition need to be created ??

    Was this answer helpful?

    0 comments
  2. Ramesh Srinivasan 87,435 Reputation points Independent Advisor
    2024-06-22T14:02:47+00:00

    Note that Disk 0 is the one which is in use currently, (although the boot files in Disk 1 are being used.)

    If you want to boot from Disk 1 (assuming it's a clone of Disk 0)

    1. Create a Windows 11 USB Setup disk.
    2. Detach Disk 0 (Samsung)
    3. Boot from the USB setup disk and access Recovery Environment by pressing Shift + F10 at the setup screen.
    4. Run: diskpart list disk select disk 0 list part list vol

    Take a photo of the screen and post the screenshot here.

    Was this answer helpful?

    0 comments
  3. Anonymous
    2024-06-22T13:47:24+00:00

    Thanks.

    Booting from the Samsung not MSI;-

    Disc 0 properties are

    Disc 1 properties

    Like to boot from disc 1 (MSI) so I can remove disc 0 (Samsung) and use as external image drive.

    Was this answer helpful?

    0 comments
  4. Ramesh Srinivasan 87,435 Reputation points Independent Advisor
    2024-06-22T13:24:32+00:00

    Hi majestic100,

    Windows is installed on Disk 0 and so we copied the boot files to the EFI partition on Disk 0.

    Right-click on Disk 0 and click Properties. It tells the model number of that disk.

    Here's a screenshot:

    Was this answer helpful?

    0 comments
  5. Anonymous
    2024-06-22T13:20:11+00:00

    Hi Remesh,

    disconnected drive but failed to boot on restart ! ?

    Took a long hard look at PC build. Yes, the PC is equipped as requested with 2 SSD's. One is fixed and connected directly to the mother board and is a 500GB MSI Spatium M390; first PC I've had with this type of SSD. The other, which has been added to the build and removable, is what I call a standard 2.5 inch SSD and is a 500GB Samsung.

    I would of thought that disc 0 would be the MSI Spatium and disc 1 the Samsung

    I'm now thinking, rightly or wrongly, that disc 0 is the Samsung and disk 1 the MSI Spatium

    Hence on successful boot, using the Samsung (disk 1 or C:)

    Appreciate your view. Should the diskpart commands be on selecting disc 1 not 0 ?? I'm confused at what's happening

    Image

    I'd like the PC to boot from the fixed MSI SSD

    Was this answer helpful?

    0 comments