HP Scanner's broke with 24H2 updates

I thought it was going to work for us as a few machines I tested on it seemed to work. However the scanner will randomly stop working and it will say scanner is disconnected. Rebooting the computer usually fixes it so it will work again, but users don't like to have to keep closing out all their work just to fix a scanner.

We have had problems with the hp scanners from the time we bought them where the scanner itself would quit responding and after a few power cycles it might start working again. After that was discovered we have slowly been replacing all the scanners with Epson scanners and have not had any trouble with them.

We are just replacing our hp scanners now so we don't have to keep dealing with this waiting for microsoft or hp to fix it.

I found a bit of a workaround for this issue on 24H2, when going to device manager and selecting one of the imaging devices and going to Properties, go to the Driver tab and select Update Driver > Browser my Computer for Drivers > Let me pick from a list of available drivers

This will show you two drivers for the scanner you selected, the top one is TWAIN and the bottom one is WIA, choose which ones applies to your use case that will make it work**,** these are basically sorted alphabetically based on a property that isn't even shown on the list.

Both KB5052093 and KB5050577 installed. Our „HP Scanjet pro 3500 fw 1” scanner it working if it was switch on before the PC! But if opposite or the scanner goes to deep sleep, the PC has to be restart to make it working again.

Same issue happens recently (last successful scan happens on 6/2). We have installed KB2028411 so both KB5052093 and KB5050577 install failed.

I'm still having issues, even after the updates are installed. This is giving us a lot of headaches because we have hundreds of scanners in our environment.