2020-02 Updates KB4524244 Locks Up My Computer and Fails Install

Anonymous
2020-02-12T01:43:44+00:00

I received the Patch Tuesday releases today.  KB4532693, KB4537759 and KB4538674 dropped in the first wave and all installed successfully.  On a subsequent "Check for Updates"  KB4524244 downloaded and installed but on the reboot, it rebooted the first time but froze hard on the second re-boot with Step 2 information and a frozen spinner on my screen, no keyboard or any access.  After about 15 mins I finally forced the system down.  On the reboot, my Secure Boot flagged me that the keys were corrupted.  I was able to get those repaired and reboot into the system.  I rebooted a couple more times but no updates attempted to install.  On a third "Check for updates, the same (KB4524244) update attempted to download but freezes the system at 94% on the download.  Again freezes hard requiring a hard re-set.  I tried flushing the Software Distribution cache but get the same results.

FYI:  I am running Windows defender with VBS (Credential Guard and Hypervisor enforced Code Integrity on an HP EliteDesk 705 G4 MT with a AMD Ryzen 5 PRO 2400G with Radeon Vega Graphics.  I also have a similar set up running on an HP laptop (Intel i5), but the update installed fine on it.

Help

Windows for home | Windows 10 | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

179 answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.

    Comments have been turned off. Learn more

  2. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.

    Comments have been turned off. Learn more

  3. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.

    Comments have been turned off. Learn more

  4. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.

    Comments have been turned off. Learn more

  5. Anonymous
    2020-02-17T00:27:32+00:00

    (1) Which model Lenovo is it? Some have an Intel processor & some are AMD (the bad guy), but I'm unsure it really matters.

    (2) "I have a USB recovery drive and even when I plug that in and try to boot into recovery mode nothing happens."

    (a) Do you mean you can't boot to it - or it does boot but nothing on it will work?

         For a Lenovo, the PF key for the Boot Options menu might be PF12, but varies by model.

    (b) Did you make it on this computer when the version was 1909?

         A recovery drive should match the version of the installed Windows, but I guess 1903 might be a match.

    (3) Anyway, make an Installation USB drive as I posted to DustyKing1738. That one must match or exceed the installed version. You will have to be able to boot to it to either try its recovery environment or to do a clean install.

    Was this answer helpful?

    0 comments