PC won't boot to Windows 10 from SSD

Anonymous
2018-08-20T08:11:17+00:00

I bought my PC years ago with only a HDD. I added a SSD myself afterwards. When I booted my PC after a hard shutdown/electricity fallout I had only my HDD in BIOS. I then boot from HDD, get an error and let the PC reboot. After a few times the SSD would be recognized in BIOS and I could change the SSD to default.

I got tired of this proccess a few days ago and found a tip to disable the hdd-partition with diskpart. The first time I had a hardreset again (mouse and keyboard froze and pc didn't shutdown with a single press on startbutton), I couldn't do the HDD boot-trick and tried changing the cables from hdd to ssd (ssd in sata1). This didn't help. In diskpart I made the SSD partition active. I now can see the SSD in BIOS, but booting gives an error "An operating system wasn't found.". When I retry diskpart, the partition could be made active again. It seems like this resets..

Bootrec.exe /FixMbr was successful

Bootrec.exe /FixBoot gives no access error (there could be some parts left of a dual boot setup)

chkdsk gives no problems found

Mediatool boot:

  • This PC can't be recovered with start-uprepair.
  • You need to choose which installation of Windows you would like to put back when using Systemrecovery.
  • Reboot, select a operating system and select Systemrecovery. No systemcopy available.

How could I make my pc boot again?

PC: MEDION AKOYA P5367 D EU (MSN: 10015458)

Motherboard: MS-7728

BIOS version: E7728MLN.209

SSD: Kingston SV200 (128GB)

HDD: ST1509DL003-9V (1500GB)

Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

107 answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2018-08-25T20:23:44+00:00

    I followed the steps above, runned Windows update and updated all drivers through Driverbooster.

    After shutting down and new boot, I was able to login. When I shutted down again, removed the USB drive and tried to boot I got the operating system isn't found error again. 

    When I plugged another USB drive in when Windows was active, still no drive visible..

    Was this answer helpful?

    0 comments
  2. Anonymous
    2018-08-25T19:16:07+00:00

    Hi,

    I'm not sure why it is not recognizing your USB drive, or freezing with the network cable... I'll need to think about that...

    Some drivers may have been damaged or something...

    For the shutdown\boot problem... Turn off Fast Startup... Hopefully that will resolve that issue anyway... maybe some of the others also...

    This feature only works when you do a SHUTDOWN and then Boot.

    It doesn't effect a RESTART.

    To turn it off or on...

    Go to Control panel...Power Options, and select Choose What the Power Buttons Do on the left.

    Then select Change Settings That Are Currently Unavailable near the top center of screen...

    Lower down on the window, uncheck Fast Startup.

    BTW... Glad to hear it finally booted to the SSD anyway... That's a good first step...

    Another thing... It is always a good idea to do a Restart after any kind of change to Windows, before doing a Shutdown... Even with fast Startup turned off... Doing a Restart is a really big deal when Fast Startup is turned on... The changes don't usually get saved properly..

    Was this answer helpful?

    0 comments
  3. Anonymous
    2018-08-25T16:31:42+00:00

    I had a USB drive in the pc which I didn't saw in windows under devices.

    After I removed it, the mouse froze and a BSOD followed (inaccessible boot device). 

    With the latest repair drive I was able to fix the boot again.

    This happened twice..

    If I add a usb drive to the running windows, it isn't recognized either..

    Adding a network cable also freezes the pc.

    Also the repaired pc seems to give the no os found error after shutdowns followed by a new boot..

    Was this answer helpful?

    0 comments
  4. Anonymous
    2018-08-25T15:55:25+00:00

    I was about to perform those steps when I booted, but saw my Windows login screen instead of the USB drive for repair :)

    HDD is still unhooked.

    I immediately created a restore point. 

    Because I am afraid to reboot, can I do some tests or so in Windows?

    Was this answer helpful?

    0 comments
  5. Anonymous
    2018-08-25T15:27:21+00:00

    Hi,

    I don't know much about the error codes except that the 0x0 seems to mean "Normal" as in no error...

    The "Test metadata of drive errorcode 0x32", from what I could find, mentions corruption from a power failure, which is what triggered this in the first place...

    I don't know if it would help to use the command prompt on the installation media to run ChkDsk or not, but it's worth a try...

    Use this... chkdsk /f /r C:

    Then try the two startup repairs again...

    Was this answer helpful?

    0 comments