The windows 10 fall upgrade 1709 fails after about 45% mark.. Then gives an error message and returns system to 1703

Thanks for the tip....  but I gave up trying to find the problem and I started with a fresh Windows 10 pro install...   I now have 1709 installed and a bare bones windows 10 pro/Norton internet/Windows Office.. and am working through all the application installs and set up...  I expect it will take another week to be up.. but it is straight forward process.... (but costly as I have had to repurchase some licences)

I reached the point after trying so many different fixes...  I no longer had confidence in the system... and even if the 1709 update had finished.. the system would have been suspect... so the clean Windows 10 option was the only way.

I say shame on Microsoft for putting many people through such an ordeal.....  I have lost way too much time to this problem.....

Andy

Hi Andrew,

Thanks. I finally found the solution to my problem here: https://forums.iis.net/t/1229869.aspx. The Wireless broadcom driver, even after uninstalling leave some registry entries that caused the problem. I de-activated the Wireless device in BIOS, removed the driver completely, did not allowed Windows Update to update the driver and finally went thorugh the registry and deleted every reference to Broadcom I could find. "After a bunch of digging, I found my problem was that my Broadcom Wireless driver had added some registry keys to HKLM\SYSTEM\CurrentControlSet\Control\Cryptography\Providers and iissetup.exe was just picking the first provider from the list, which was the Broadcom one, and failing."

After i did that, I also proceed with the USB-ISO created installation(Setup) without any connection to Internet (unplug Ethernet cable) and I also clicked to not make updates before installing(which is the recommended option during setup).

Then I am now with 1709 with latest January updates. Wireless Broadcom driver is back enabled up and running as well. 

this fixed mine. iv been using ethernet for quite some time but i checked those registry entries and it had broadcom so i simply deleted the entries for it. there were 2. i ran a full search for broadcom as well, found a few other entries for it regarding SHA256. the prior entry had a microsoft entry in the key so i copied that over the broadcom entry as it referred to the earlier keys i removed.

to note: i dont have any wireless adapters installed as id already removed them. had an old netgear, dlink and tplink over the years. most recent being the tplink. all software had already been removed.

downloaded the update and it went perfectly. though asus aisuite had an issue after the restart. i'll just reinstall it. i was only using it to monitor temps anyway and i fixed that issue a while back.

2018-02-07 12:24:58, Error      [0x018007] CSI    00000020 (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109).  Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable[gle=0x80004005]

Try looking at  setupact.log  for this one's context.  Also, the last messages show CBS.log (or archived pieces, since the CBS.log will probably be showing a rollback once you get to see it) might have some clues.

Did you try using my PowerShell script?  It could change our ideas of what would be worth looking at.  So far what we have seems inconclusive.

I really appreciate all your help....  but.. I have come to the end.....  I give up... I am going to back the system up... and then do a clean Windows 10 install....  I say ..  Microsoft - I say shame on you!!

Thanks for the help

2018-02-07 12:24:58, Error      [0x018007] CSI    00000020 (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109).  Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable[gle=0x80004005]

Try looking at  setupact.log  for this one's context.  Also, the last messages show CBS.log (or archived pieces, since the CBS.log will probably be showing a rollback once you get to see it) might have some clues.

Did you try using my PowerShell script?  It could change our ideas of what would be worth looking at.  So far what we have seems inconclusive.

same results...

Check again.  We were changing the symptom in the logs.

I FOUND A REFERENCE TO A BUNCH OF STEPS WHICH HAVE HELPED PEOPLE.,,

https://www.askvg.com/fix-something-happened-error-message-in-windows-10-upgrade/

AS WELL HERE IS THE NEW EEROR LOG...  I THINK.,,  UNLESS THERE IS SOMETHING OBVOICE...  I AM NOW RECONCILED TO DOING THE REPLACE UPGRADE,,,  SIGH

2018-02-07 10:54:46, Error                 MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104

2018-02-07 10:54:46, Error                 MOUPG  CSetupManager::ExecuteInstallMode(723): Result = 0x800705BB

2018-02-07 10:54:46, Error                 MOUPG  CSetupManager::ExecuteDownlevelMode(347): Result = 0x800705BB

2018-02-07 10:54:46, Error                 MOUPG  CSetupManager::Execute(237): Result = 0x800705BB

2018-02-07 10:54:46, Error                 MOUPG  CSetupHost::Execute(375): Result = 0x800705BB

2018-02-07 11:00:16, Error                 SP     CDownloadDUUpdates::DoExecuteInternal: Did not find hard disk space needed, when update cab files will not be extracted. This is unexpected! hr = 0x8000ffff

2018-02-07 11:00:16, Error                 SP     CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x8000FFFF

2018-02-07 11:00:16, Error                 MOUPG  DUImage: Failed to execute GDR search and download [0x8000ffff]

2018-02-07 11:01:14, Error                 DU     DU::CDUSession::Search: Failed to set WU internal configuration property for targeted scans. hr = 0x80070057

2018-02-07 11:01:14, Error                 DU     DU::CDUSession::BuildSearchCriteria: Caller profile search criterion is not supported. hr = 0x80070032

2018-02-07 11:01:14, Error                 DU     DU::CDUSession::Search: Failed to build the search criteria. hr = 0x80070032

2018-02-07 11:04:42, Error                 CONX   0xd0000034 Failed to add user mode driver [%SystemRoot%\system32\DRIVERS\UMDF\uicciso.dll]

2018-02-07 11:19:53, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 11:21:42, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 11:21:55, Error                 SP     pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]

2018-02-07 11:22:20, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 11:22:29, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{52776FBF-403C-49cc-b7cb-dd557f36096A} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

2018-02-07 11:22:47, Error                 CSI    00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #3190# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = '(null)', value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })

[gle=0x80004005]

2018-02-07 11:22:55, Error                 CSI    00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #81125# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = '(null)', value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })

[gle=0x80004005]

2018-02-07 11:23:04, Error                 CSI    00000003 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #159342# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = '(null)', value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })

[gle=0x80004005]

2018-02-07 11:23:07, Error                 CSI    00000004 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #187838# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = '(null)', value = { type: 40972, bytes ( 12 ): 65006e002d00550053000000 })

[gle=0x80004005]

2018-02-07 11:23:13, Error                 CSI    00000005 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #237874# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = '(null)', value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })

[gle=0x80004005]

2018-02-07 11:23:15, Error                 CSI    00000006 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #266139# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = '(null)', value = { type: 40972, bytes ( 12 ): 65006e002d00550053000000 })

[gle=0x80004005]

2018-02-07 11:23:48, Error                 CSI    00000007 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #320816# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = '(null)', value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })

[gle=0x80004005]

2018-02-07 11:23:51, Error                 CSI    00000008 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #354380# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = '(null)', value = { type: 40972, bytes ( 12 ): 65006e002d00550053000000 })

[gle=0x80004005]

2018-02-07 11:24:04, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 11:24:17, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{C939EC0F-2F56-4CE8-AF56-2336596A5FA7} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

2018-02-07 11:28:32, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Skipping device '{A87C2E0F-9A46-46b8-8EC4-E33355FBE1F7}\KeyboardFilter\5&ee0f2df&0&01' without driver.

2018-02-07 11:28:36, Error      [0x0808fe] MIG    Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490

2018-02-07 11:29:05, Error                        CSetupAutomation::Resurrect: File not found: C:$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002]

2018-02-07 11:29:05, Error                 SP     CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]

2018-02-07 11:31:55, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 11:32:17, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 11:33:53, Error                 SP     [SetupCl library] Required profile hive does not exist: [??\C:$WINDOWS.~BT\NewOS\WINDOWS\system32\config\systemprofile\NTUSER.DAT].

2018-02-07 11:34:17, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 11:34:29, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{C939EC0F-2F56-4CE8-AF56-2336596A5FA7} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

2018-02-07 11:34:29, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{12bc829e-787e-48c2-a9b3-8d2e7aabf06e} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

2018-02-07 11:35:23, Error                 MIG    Failed to check the certificate of the catalog file C:\WINDOWS\System32\CatRoot{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\ntprint.cat.[gle=0x800b0100]

2018-02-07 11:46:29, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 11:46:36, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{52776FBF-403C-49cc-b7cb-dd557f36096A} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

2018-02-07 11:47:06, Error                 MOUPG  Finalize: Error reading narrator reg key: [0x80070002]

2018-02-07 11:47:12, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD

2018-02-07 12:23:10, Error                        [SetupPlatform.exe] winreHashWimFile: Failed to hash [C:$WINDOWS.~BT\Sources\WinRE]: 0x5

2018-02-07 12:24:58, Error                 CSI    0000001f (F) Done with generic command 6; CreateProcess returned 0, CPAW returned S_OK

    Process exit code 30 resulted in success? false

    Process output: [l:22 [22'[gle=0x80004005]

2018-02-07 12:24:58, Error      [0x018007] CSI    00000020 (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109).  Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable[gle=0x80004005]

2018-02-07 12:29:29, Error                 CSI    0000013f (F) Generic Command ErrorCode: 80004005 Executable: iissetup.exe ExitCode: 30 Phase: 38 Mode: Install (first install) Component: Microsoft-Windows-IIS-SharedLibraries-GC, Culture=neutral, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS[gle=0x80004005]

2018-02-07 12:29:29, Error                 CSI    00000141@2018/2/7:17:29:29.537 (F) onecore\base\wcp\componentstore\com\advancedinstallerstore.cpp(580): Error HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED) originated in function Windows::COM::CComponentStore::IAdvancedInstallerAwareStore_ResolvePendingTransactions expression: HRESULT_FROM_WIN32(14099L)

[gle=0x80004005]

2018-02-07 12:29:32, Error                 CSI    00000142 (F) HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED) #146# from Windows::COM::CComponentStore_IAdvancedInstallerAwareStore::ResolvePendingTransactions(dwFlags = (DontFailIfPrimitivesPending|IndicatePrimitiveRollback), Progress = NULL, Phase = 0, Disposition = (unknown enumerant 0)' | '0)[gle=0x80073713]

2018-02-07 12:29:32, Error                 CBS    Startup: Failed to process advanced operation queue, startupPhase: 0. [HRESULT = 0x80073713 - ERROR_ADVANCED_INSTALLER_FAILED]

2018-02-07 12:29:32, Error      [0x030149] CMI    Callback_CBS_Do_OnlineInstall:Calling startup processing failed 0x80073713

2018-02-07 12:29:32, Error      [0x030153] CMI    Callback_CMI_ConfigInstall: CBS startup processing failed.