Error 0xC1900101 – 0x40017 when installing Windows 8.1

Anonymous

Hello everyone,

We would like to thank all those who have helped us to collect data by sending us logs. The cause for error 0xC1900101 – 0x40017 is known to be faulty drivers, however it can be difficult to identify exactly which drivers are creating the error.

Note: Please double-check the error code before reading further. There are many variations of error 0xC1900101, each with a different location code -- the error extension, located after the dash. The information in this thread is intended only for location code 0x40017. If you are receiving a different location code, these steps are unlikely to resolve your issue.

There have been reports of a USB driver causing this error. Until a specific USB driver can be determined as a root cause, if you receive this error, we recommend you unplug all USB devices (other than your mouse and keyboard) as a troubleshooting step and try the upgrade again. If the upgrade is then successful, you can plug the devices back in and they should function normally.

We have identified a few drivers associated with the following hardware or software that could be causing this problem:

1. SteelSeries – Mouse and keyboard manufacture. The SteelSeries Engine is currently not supported on Windows 8.1. Please see their FAQ for more info and updates.

2. NVIDIA -- Video card manufacture. Check to make sure you’ve upgraded to the latest video drivers.

3. ESET - Antivirus and security-related products. Please see the ESET Knowledgebase to learn how to safely upgrade to Windows 8.1 with ESET Smart Security or ESET NOD32 Antivirus installed.

4. Trusteer Rapport -- Credit card fraud protection software. Trusteer recommends installing the latest update for Windows 8.1 compatibility.

If you have any of these programs installed, please let us know if disabling, uninstalling, or upgrading the software or drivers allowed you to install Windows 8.1 successfully.

We are sorry for any inconvenience and appreciate your help and understanding while we continue to investigate this issue.

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

Answer accepted by question author

Anonymous

Hello,

Microsoft is aware some customers are unable to install Windows 8.1 due to error 0xC1900101 -0x40017.

This error indicates a failure to boot Windows 8.1 occurred during the final parts of the update, causing the system to roll back to Windows 8. The most likely cause of this error is an incompatible driver or hardware defect. Unfortunately, due to the timing of this failure, there are often no logs, crash dumps or other diagnostic information available to investigate the issue easily, which makes it difficult to determine which, if any, of the drivers or system components are causing the update to fail.

We are currently working with the companies that develop these drivers to help them update their problematic drivers whenever they are identified. Some of the identified drivers have been listed in the original post, however due to the sheer number of drivers constantly being created by other companies all over the world, this is a daunting task. We understand that the inability to easily identify the incompatible driver can be incredibly frustrating and we are sorry for the inconvenience.

Make sure you’ve installed all the latest Windows Updates and latest drivers from your hardware and software manufacturers. You can also try uninstalling any unnecessary hardware or software prior to updating to Windows 8.1.

If your hardware and software manufacturers do not have updated drivers and you are experiencing this error, the best method for upgrading to Windows 8.1 is to clean install Windows 8, and then update to Windows 8.1 before allowing any additional drivers or software to install.

To do this:

Back up all of your personal documents and data to an external drive.
Disconnect your computer from the Internet.
Perform a clean install of Windows 8 using Windows 8 installation media (DVD or USB). For help performing a clean install of Windows, see How to perform a clean install of Windows.

Note: If you do not have media and Windows 8 was pre-installed on your PC, please contact your PC manufacturer for assistance. Otherwise to get help obtaining installation media, contact Microsoft Support. 4. Once you’ve reinstalled Windows 8, change your hardware settings so that you do not automatically install driver updates.

**>>**From the Start screen, type “System”, and then click on “View advanced system settings” in the search results. This will open the System Properties dialog.

**>>**Click on the Hardware tab, and then click Device Installation Settings.

**>>**When the Device Installation Settings window appears, click the “No, let me choose what to” button, and then “Never install driver software from Windows Update”. Click Save Changes to save the setting. 5. Reconnect your computer to the Internet. 6. Install Windows Updates. Restart the computer when prompted. 7. Open Windows Store and install Windows 8.1. 8. Afterwards, be sure to restore your hardware settings so that your device drivers once again install automatically. (Repeat Step 4, but restore this setting to “**Yes, do this automatically (recommended)”**and Save changes.)

0 comments

149 additional answers

Anonymous

2015-10-09T09:23:01+00:00

Sorry. But it doesn't work.
Was this answer helpful?

0 comments No comments
Anonymous

2015-08-15T16:57:41+00:00

Well, let's see...about reading...I did not post "error codes" in bold in the posts addressing you, and you are posting Windows 10 upgrade questions in a Windows 8.1 thread. Got it. :-)

Other than that, you should be able to install Windows 7 on a new hard drive in the original machine in which you were going to install it. Activate it. Update that to Service Pack 1, and you should be able to upgrade that to Windows 10 using the ISO, unless you do a clean install and unless you move that hard drive to another machine, in which case you will have to activate it again. The "custom" clean install option will make it so you will not be able to activate Windows 10. Don't use it. I cannot give you a 100% confirmation because I do not know your precise situation, do not know the specifics about your hardware, etc.

Also, be aware that certain Intel graphics hardware also will generate the above memory management error, as will certain Bluetooth and Wi-Fi hardware. Do not use any of that hardware during the upgrade. You should be able to upgrade at that point but there is no 100% guarantee that I can give without knowing all the specifics.

And, no, I do not work for Microsoft--in case you were wondering.
Was this answer helpful?

0 comments No comments
Anonymous

2015-08-15T08:21:42+00:00

The error is failure at second boot with the 0xC1900101 – 0x40017 error code.

I have read the previous suggestions from the forum. I have no graphics card it being an intel chipset with i3 processor. I've tried on line upgrades before and after the official role out, iso on ide DVD iso on usb drive, I've removed all cards and even uninstalled the usb hub that runs the mouse and keyboard. (Internal on chipset. I've tried cleaning the update history and reinstalling. I use microsoft antivirus which I have also uninstalled. I sue a microsoft mouse and keyboard.

PS I can read and don't need error codes in bold. I hope the large font above convinces you that I can read, copy and paste.

Please confirm that I can buy a new hdd, install windows 7, activate then use the iso via usb drive or DVd to upgrade to Win10?
Was this answer helpful?

0 comments No comments
Anonymous

2015-08-15T02:30:26+00:00

Windows 7 must be at the SP1 level too for you to qualify for the free upgrade to 10.

True. And, Windows 8 must also be at 8.1.
Was this answer helpful?

0 comments No comments