Cant backup 8.1 using system image backup! Error 0x80780119, Cant optimise system partition, (this is why i cant backup) please read. . .

Anonymous
2013-10-19T14:16:48+00:00

I am having this issue, cant optimise the system partition 350mb. 8.1 official release,

This is also causing a huge problem, the optimise option in windows 8.1 allows me to optimise the c: drive but not the system partition this prevents a system image backup...!!

Due to the system partition being out of space for a shadow copy to be placed onto it the backup fails every time with this error code, -- 0x80780119 --.

Backups are a huge factor in operating systems and since upgrading I cant backup my system using windows image backup, if I could optimise the system partition and straighten out the file structure within it (free up some space) for the shadow copy then the volume shadow copy could be placed onto the drive but it cant...

This all worked fine in 8.0 but not now...please fix this problem!?

Not being able to backup your system is not good enough...

here is my my issue again in pictures...

1.system volume needs optimising

but pressing the optimise for this does nothing at all.. current status remains "Needs optimisation".

The way an ssd reclaims drive space is to use the optimise function, this not working prevents the reclaim for files/data to be written to space where files have been deleted previously. Giving the impression the drive/partition is full when really its not full just needs optimising/trimmed.

 

  1. initiate the system image backup

  1. both volumes to be backed up

  1. error message due to insufficient space on the system partition for shadow copy. 

 

  1. finally here is a capture of the current disk setup on my system, notice the system partition only has 17mb free space and according to the above error message I need atleast 50mb free for the volume shadow copy !? Due to this I cant create a backup of my system using windows 8.1 !

(system partition has no drive letter assigned to it 350mb)

PLEASE HELP !! Thanks for reading.

Windows for home | Previous Windows versions | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2013-10-20T20:19:10+00:00

I have found a way around this getting Windows System Image Backup working again. I did this on my laptop and desktop confirming that I could recover from the images. It is actually pretty easy but should not be necessary. The reason that the backup would not work was because the recovery partition was using 284MB of the 300MB available. There was not 50MB available for shadow copy. Here are the steps I took on an EUFI GPT disk:

Note: All commands are without quotes. 

Disclaimer: I would recommend backing up all of you important data as any time you mess with partitions, there is the possibility to lose data. This process was done one both my laptop (Win8.1 Home) and desktop (Win8.1 Pro). I cannot take responsibility if this causes any damage. With that being said, I hope this helps.

Download and install MiniTool Partition Wizard http://www.partitionwizard.com/free-partition-manager.html Note that none of the changes will take effect until you hit apply. I am sure others may work but this is the one that I used and it is free. 

You should have 3 Windows partitions; Recovery - 300 MB, EFI System - 100 MB, and your system Volume to start off with. 

  1. Once installed, Open Partition Wizard and Shrink your system volume, C: in my case, by 101MB at the beginning of the partition. (I had to put 101MB as when I tried 100 it said that the space was too small when doing the next step) To do this, Right Click the C: Drive, select, Move/Resize, and the put 101 in box named "Unallocated Space Before:" and click OK.
  2. Copy the EFI System partition (100 MB FAT32) to this new Free Space by right clicking, selecting copy, and then selecting the unallocated space. Then next the OK.
  3. Delete the 100MB EFI System Partition after the Recovery Partition. 

After this is done, you will see 100MB unallocated space after the Recovery Partition. 

  1. Right click on Recovery partition and select Extend. Drag the bar to take up all of the extra free space. This will change the recovery partition from 300MB to 400MB allowing for enough space (50MB) for the shadow copy. Click OK. 
  2. Next Click Apply. I received an error stating that it could not make changes due to C: being in use. I clicked restart. 

When the computer restarts, Partition Wizard will do its thing. Once it is done you should boot into Windows again.

This next part is essential, because, windows now does not recognize the partition that was moved before as an EFI System Partition. If you try and do a backup image now, only the system partition will show and not the Recovery or EFI System

  1. Open a cmd prompt with administrator privileges. Press Start Key, Type cmd, right click, select run as administrator. 
  2. Type diskpart to start windows command line disk manager. 
  3. Find the disk that Windows is installed on by typing List disk. This will be different on each machine but for illustration mine was disk 0
  4. Select that disk by typing the command "select disk" and the disk number.
  5. Next, determine the EFI partition that was moved earlier. This is the partition that was moved earlier and should be 100MB. Type in the command "list part" to see a list of the partitions on the disk. Mine was Partition 3. This may be different on your system. 
  6. Once you have determined the partition number, type "select partition " and your partition number
  7. Next you have to set this partition as an EFI System volume. Type in this command - "set id = c12a7328-f81f-11d2-ba4b-00a0c93ec93b" This changes the partition type to an EFI system volume.
  8. After all of this is done, restart your computer and you should now be able to back up you system using the System Image Backup in File History.

I know some of this may seem a little elementary to some but you never know who needs help and their technical knowledge. 

I hope that this helps and let me know if you have any questions.

Was this answer helpful?

10+ people found this answer helpful.
0 comments

778 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2013-11-17T01:06:29+00:00

    From the linked MS article KB 2748351:

    "To create a custom image, use the Recimg.exe command-line tool that is included in Windows 8. To do this, follow these steps:

    1. Create a destination folder for the custom image. For example, create a folder named "Refreshimage" on drive C.
    2. Open an elevated command prompt. To do this, follow these steps:
      • On the Start page, type cmd, press and hold or right-click Command Prompt, and then tap or click Run as administrator.
    3. Type the following command, and then press Enter:

    recimg -CreateImage drive:*folder*

    For example, if you create "C:\Refreshimage" in step 1, run the following command:

    recimg -CreateImage C:\Refreshimage

    Note The Recimg command registers the custom image that is used to refresh the Windows 8 PC."

    Now, this sounds really interesting. It seems to be an "official" way that is unlike the previously here discussed "solutions" without re-installing, manipulating partitions, or using 3rd party software creating a system image.

    I wonder though:

    • Does the procedure MS is explaining in the linked article KB 2748351to create a "custom system image" work with Windows 8.1 as well? KB 2748351 is referring to Windows 8.0.
    • It seems they are referring to an existing "system image" that is used to refresh the system when the Windows 8.0 "refresh" function is selected. Is the new "custom system image" that is created with the command "recimg"****replacing the existing "system image"? And where is this original "system image" currently stored? I cannot find such huge file.

    I am tempted to try this out.  I guess it would be best to create the "custom system image" on a separate SDD/HDD and then access it with the "recovery function" if it is needed to restore the system.

    Was this answer helpful?

    0 comments
  2. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.

    Comments have been turned off. Learn more

  3. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.

    Comments have been turned off. Learn more

  4. Anonymous
    2013-11-15T17:47:04+00:00

    Yesterday I followed "What’s New in Windows 8.1 for IT Professionals Jump Start" on the web and asked repeatedly whether they would comment on the problem the we are unable to create a system image after upgrading from Windows 8 to 8.1.

    I had the impression of censorship as my questions were ignored quite some time and finally I received a "private" answer (i.e. hidden to other participants) directing me to http://support.micro soft.com/kb/2748351 which is about creating a system image to refresh a Windows 8 PC using recimg -CreateImage drive:\folder

    Was this answer helpful?

    0 comments