0xc000000e Boot Error

Anonymous
2011-01-11T16:06:14+00:00

[b]Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:

  1. Insert your windows installation disc and restart your computer.
  2. Choose your langugae settings, and then click next
  3. Click "repair your computer."

Status: 0xc000000eInfo: The boot selection failed because a required device is inaccessible.[/b] I got this error after some random point in time on my computer. At the time I had two instances of windows on my computer and after this point it took me a week or two to find my windows install dvd but once I did none of the repair tools seemed to work and it would always end up with this error. I then decided to give up and just install windows 7 on the hdd I didn't have an instance of windows on since I have 3 hdd. This worked well for 4 days until this morning when the same error message popped up on me. I hadn't even gotten around to reinstalling all the same programs as my other instance of windows. Also in the meantime while using the newest instance of windows the computer never recognized that there were 2 other instances of windows but now today while going about fixing the newest instance of windows it did decide to recognize that there is at least one other form of windows on the computer. While rebooting trying every type of repair tool I was able to boot into the older form of windows but none of my programs worked and I wasn't able to connect to the internet and eventually on a random reboot in which I didn't press any buttons I am again on my newest version of windows. I really have no clue what is going on and this is quite frustrating at the moment since I don't know what is wrong. I thought it might be one of my hdd but unless it is all 3 of them then I really don't think it is them. Also when running the restart repair (I think that's what it was called) it said it could find no problems but there was one root error. I am not sure what that means but maybe that might help. If there is any additional info that would help to find the solution to this problem please let me know. Thanks ahead of time for any assistance.

*EDIT* I have no idea how to get the words to not go only on one line...*/EDIT*

Windows for home | Windows 11 | Install and upgrade

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2011-01-12T07:05:07+00:00

Hello Andrew,

1.    Since when are you facing this issue?

2.    Any recent changes made to the computer?

Method 1:

Unplug all the external devices and try booting and check.

Method 2:

Check if you are able to boot in safe mode or not:

http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

If yes,I suggest you to put the computer inclean boot state and check.

To help troubleshoot error messages and other issues, you can start Windows Vista by using a minimal set of drivers and startup programs. This kind of startup is known as a "clean boot." A clean boot helps eliminate software conflicts.

Refer the link below for more details:

How to troubleshoot a problem by performing a clean boot in Windows Vista:

http://support.microsoft.com/kb/929135

Note:

After you have finished troubleshooting, follow these steps in the above article to reset the computer to start as usual.

If not,try perfomring astartup repair and check:

http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

Method 3:

If not, I suggest you toRebuild the BCD store manually by using the Bcdedit.exe tool.

Refer step 3 to do the same in the below article:

**http://support.microsoft.com/kb/2004518**

For your reference:

http://social.technet.microsoft.com/Forums/en/itprovistadeployment/thread/4de675a4-14ae-4469-b881-5df58d846bff

Regards,

Savan – Microsoft Support.

Was this answer helpful?

100+ people found this answer helpful.
0 comments

58 additional answers

Sort by: Newest
Most helpful Newest Oldest
  1. Anonymous
    2016-07-30T04:06:26+00:00

    Or reset your bios. The problem is your bios has the 'Fastboot' option enabled and this rushes the boot sequence of the bios effectively interupting the initialization of some hardware on some motherboards. Disable it and you should be good to go.

    Was this answer helpful?

    0 comments
  2. Anonymous
    2016-07-30T04:02:50+00:00

    No I don't work at MS, but this issue is caused by enabling the 'Fastboot' option in your bios/uefi. Disable that and Viola! You're fixed

    Was this answer helpful?

    0 comments
  3. Anonymous
    2016-07-17T22:15:47+00:00

    The problems all covered over a range from 2011 thru 2013 so I am not sure my problem is related. However my problem has been solved so I will tell you way happened. After several days at the shop the tech determined that the problem was a bad HD data cable that was intermittent and had corrupted the OS as well as the last 2 backups [Using Acronis BU software]. Finally going back 3 BUs he found an OS that worked. So now all is good. I had data BUs on another driver that was later than the BU OS so I did not loose any data and I did not have to reinstall any programs. Thanks for a dedicated tech for his hard and continued work to find the problem.

    Problem solved, Not sure this helps any of you but if it does ok.

    Was this answer helpful?

    0 comments
  4. Anonymous
    2016-07-15T23:54:57+00:00

    When I press Y it says requested system device cannot be found. Please help!!! :( :(

    Was this answer helpful?

    0 comments