Teredo Tunneling Pseudo-Interface This device cannot start. (Code 10)

Anonymous

I have a yellow ? in my Device Manager entry for the Teredo Tunneling Pseudo-Interface. This is a 3 week old Windows 7 64bit machine. I saw messages similar to this in this forum and have run an ipconfig /all with the following results:

Microsoft Windows [Version 6.1.7600]

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : KandE-PC

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : domain.actdsltmp

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : domain.actdsltmp

Description . . . . . . . . . . . : Realtek PCIe FE Family Controller

Physical Address. . . . . . . . . : 44-87-FC-40-76-6F

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IPv4 Address. . . . . . . . . . . : 192.168.0.2(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Lease Obtained. . . . . . . . . . : Tuesday, March 23, 2010 8:31:13 AM

Lease Expires . . . . . . . . . . : Saturday, March 27, 2010 1:07:41 PM

Default Gateway . . . . . . . . . : 192.168.0.1

DHCP Server . . . . . . . . . . . : 192.168.0.1

DNS Servers . . . . . . . . . . . : 192.168.0.1

205.171.3.25

NetBIOS over Tcpip. . . . . . . . : Enabled

C:\Windows\system32>

______________________end of ipconfig data____________________

I would be most appreciative if you can help me with this (apparently) slight problem. I do not know that this situation is causing me any difficulty but I like to keep my computer running well.

Thanks in advance,

Chuck

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

Answer accepted by question author

Anonymous

Hi,

First lets follow these below steps and check if the issue gets resolved.

Right click the Teredo Tunneling Pseudo-Interface > Update Driver Software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer -> network Adapter > Microsoft > Microsoft teredo tunneling adapter

To troubleshoot your issue you may try the below methods one by one.

The error message you posted indicates that you have an incompatible driver or the device driver is missing.

To make sure that you download the correct and the most up-to-date version of the driver driver, visit the Motherboard manufacturer’s website wherein all the drivers will be listed. Select the appropriate driver for the device that is compatible with Windows 7.

You may uninstall the existing driver from device manager before installing the new one.

1. Open Device Manager by clicking the Start button, clicking Control Panel , clicking System and Maintenance, and then clicking Device Manager.

If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

2. Locate the sound card, right click on it and select properties .

3. Go to driver tab and click on Uninstall button to uninstall the driver associated with the device.

Once the uninstall completes, restart your computer and check if the issue got resolved.

Thanks and Regards:

I. Suuresh Kumar- Microsoft Support.

Visit our Microsoft Answers Feedback Forum and let us know what you think.

0 comments

Answer accepted by question author

Anonymous

Do you have ZoneAlarm installed?

If so, see the following thread for a setting within ZoneAlarm to change:

http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/c022478f-17cb-44de-8b85-fd021371eab3

0 comments

190 additional answers

Anonymous

2015-04-16T09:16:43+00:00

Teredo Tunneling is a Pseudo-Interface for My Cloud Network Media Server... there are NO drivers for!

Just put the value of Dword on "0".... and that's it!

The answer to the question if 16GB (RAM) works in a pavilion DV7 depends on the kind of motherboard or Bios.

If you start up with f10 and look into the bios you can see that the memory size is expressed in MB with a reach of 9999MB. if you put 16GB in the slots the bios will show something like 6500MB ... there is no space to write 16500MB ... That means that this will not work good.... it will result in start up problems. On the other hand I can assure you that 8GB+2GB (total of 10GB) works without problems!
Was this answer helpful?

0 comments No comments
Anonymous

2015-04-16T04:23:07+00:00

I tried the first steps and I got a response saying "Windows found driver software for your device but encountered an error while attempting to install it." What steps can I take to get this fixed.
Was this answer helpful?

0 comments No comments
Anonymous

2015-03-23T17:09:50+00:00

nice to know that! good luck :)
Was this answer helpful?

0 comments No comments