this application failed to start because side-by-side-configuration is incorrect

Just make sure you have no corrupt files in your computer system.  This can caused the problem

Hi, 

Please let me know the next procedure I am unable to run the NERO application.

Thank you.

APPLICATION

Faulting application name: wmpnetwk.exe, version: 12.0.7601.17514, time stamp: 0x4ce7ae7f

Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24

Exception code: 0xc0000005

Fault offset: 0x0000000000053f6b

Faulting process id: 0xf58

Faulting application start time: 0x01d1456dcc327c0e

Faulting application path: C:\Program Files\Windows Media Player\wmpnetwk.exe

Faulting module path: C:\Windows\SYSTEM32\ntdll.dll

Report Id: ba7eaa57-b174-11e5-83c6-6cf049af5c9b

Activation context generation failed for "C:\Program Files (x86)\Nero\Nero 9\Nero StartSmart\NeroStartSmart.exe.Manifest". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

Activation context generation failed for "C:\Program Files (x86)\Nero\Nero 9\Nero StartSmart\NeroStartSmart.exe.Manifest". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

Activation context generation failed for "C:\Program Files (x86)\Nero\Nero 9\Nero StartSmart\NeroStartSmart.exe.Manifest". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

Activation context generation failed for "C:\Program Files (x86)\Nero\Nero 9\Nero StartSmart\NeroStartSmart.exe.Manifest". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

Activation context generation failed for "C:\Program Files (x86)\Nero\Nero 9\Nero StartSmart\NeroStartSmart.exe.Manifest". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

SYSTEM

The Windows Media Player Network Sharing Service service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 30000 milliseconds: Restart the service.

Log Name:      Application

Source:        SideBySide

Date:          06/01/2015 9:38:49 PM

Event ID:      59

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      EEVillegas-PC

Description:

Activation context generation failed for "C:\Program Files (x86)\SQUARE ENIX\Tombraider\TombRaider.exe".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_f480bfaef65491a5.manifest" on line 0. Invalid Xml syntax.

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="SideBySide" />

    <EventID Qualifiers="49409">59</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2015-01-07T04:38:49.000000000Z" />

    <EventRecordID>289174</EventRecordID>

    <Channel>Application</Channel>

    <Computer>EEVillegas-PC</Computer>

    <Security />

  </System>

  <EventData>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>C:\Program Files (x86)\SQUARE ENIX\Tombraider\TombRaider.exe</Data>

    <Data>C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_f480bfaef65491a5.manifest</Data>

    <Data>0</Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

  </EventData>

</Event>

Hi ChickC**,******

Welcome to Microsoft Windows 7 Answers Forum!

(a). Use the System File Checker tool (SFC.exe) to determine which file is causing the issue, and then replace the file. To do this, follow these steps: 

1. Open an elevated command prompt. To do this, clickStart, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
2. Type the following command, and then press ENTER:

sfc /scannow

The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.

·         More Infoermation about SFC scan can be found in this document:

http://support.microsoft.com/kb/929833

(b). Perform a check disk:

Use the steps below:

1. Open Computer by clicking the Start button, and then clicking Computer.
2. Right-click the drive that you want to check, and then click Properties.
3. Click the Tools tab, and then, under Error-checking, click Check now. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

To automatically repair problems with files and folders that the scan detects, select Automatically fix file system errors. Otherwise, the disk check will report problems but not fix them.

To perform a thorough check, select Scan for and attempt recovery of bad sectors. This scan attempts to find and repair physical errors on the drive itself, and it can take much longer to complete.

To check for both file errors and physical errors, select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.

1. Click Start.

Depending on the size of your drive, this might take several minutes. For best results, don't use your computer for any other tasks while it is checking for errors.

Update the .NET framework

Download and install the latest .NET Framework

http://www.microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

If still the error persists please provide us the error log:

Type eventvwr.msc /s in the address bar.

****List any events that are listed as "Error" in the main window when you go to "Windows Logs" and "Application." There are often a lot of them. Send us whichever ones you see listed for the last couple days. (Please also do for the logs in "System"). When you do, provide us the name of the "Source" and whatever is listed in the description box below the list of logs when you click on one. 

Hope it helps. 

Thanks and Regards:

Shekhar S - Microsoft Support.

Visit our Microsoft Answers Feedback Forum

http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ and let us know what you think.

Log Name:      Application

Source:        SideBySide

Date:          09-Dec-14 9:41:35 AM

Event ID:      33

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      Tarot

Description:

Activation context generation failed for "C:\Program Files\TOSHIBA\TOSHIBA Web Camera Application\TWebCamera.exe". Dependent Assembly Microsoft.VC80.OpenMP,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis.

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="SideBySide" />

    <EventID Qualifiers="49409">33</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2014-12-09T04:11:35.000000000Z" />

    <EventRecordID>925262</EventRecordID>

    <Channel>Application</Channel>

    <Computer>Tarot</Computer>

    <Security />

  </System>

  <EventData>

    <Data>Microsoft.VC80.OpenMP,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762"</Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>C:\Program Files\TOSHIBA\TOSHIBA Web Camera Application\TWebCamera.exe</Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

    <Data>

    </Data>

  </EventData>

</Event>

Hello Shekhar,

My system is Win 7 32 bit and when i open webcam it reponds that side by side configuration is failed. I have done sfc scan and disk check. Please guide me on this issue.