WiFi/Networking issue when connected to docking station

Anonymous
2015-12-16T10:29:24+00:00

Hi,

I recently bought the new Surface Pro 4 (i7, 512 GB SSD) along with the new docking station. I've experienced some of the general issues that various other people have mentioned (such as the power management/sleep issue) but I'm also seeing an issue that does not yet seem reported.

When I have the new docking station connected, if it's connected to a monitor, the network connectivity sometimes drops. I have been using it without any issues for about 2 weeks, but today I had a lot of trouble connecting to the office WiFi network. The network itself was definitely working properly as it was quick and reliable for several other users, including my own phone. Nonetheless, I rebooted the router to make sure.

Windows simply would not connect to the WiFi network (even though it has always been a saved connection). Trying to connect caused it to sometimes fail and sometimes ask for the network password (and entering it correctly would still fail - but that's another long-standing Windows bug!). Connecting to alternative networks did exactly the same; it would attempt to connect to my phone's portable hotspot, connect and disconnect in a few seconds, retry, and then stop (in a disconnected state). Intermittently it would connect to the network, but sometimes with 'No Internet' and clearly lots of DNS issues in trying to resolve google.com. It sometimes took 30-60 seconds to load google.com.

Troubleshooting steps

  • Tried disabling and re-enabling the WiFi adapter
  • Tried restarting Windows 10
  • Tried disabling all other network adapters (the Ethernet port from the dock and two created by VirtualBox)
  • Tried removing dock connection
    • This is the first time the connection issues were resolved and google.com was loaded (and could be reloaded) within milliseconds
  • Re-attached dock and tried removing Logitech unifying receiver (the only USB device plugged in)
  • Tried removing monitor
    • Everything back to normal, was able to browse very quickly again
  • Tried re-attaching monitor
    • Network issues again where loading google.com would take around 20 seconds and refreshing the page would also take several seconds

Clearly there is an issue with the external display. The display is a 1080p monitor which is connected via a HDMI cable and a Mini DisplayPort to HDMI adapter. The strange part is that this problem has never come up before, though in hindsight I would say that browsing at the office has been generally a little bit slower than at home.

Has anyone else experienced this issue? I might try to get an older pre-1.4 spec HDMI cable to see if this has an effect.

Surface | Surface Pro | Power and battery

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

116 answers

Sort by: Oldest
  1. Anonymous
    2017-02-12T09:05:09+00:00

    This article solved the issue I encountered. WiFi was not working when I connected an external display to the surface dock. Updated the firmware and it works. For now. hth

    https://www.microsoft.com/surface/en-us/support/hardware-and-drivers/update-surface-dock?os=windows-10&=undefined#updater

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2017-02-14T08:14:41+00:00

    Hi BersantDisha,

    This worked instantaneously for me. Thx. a million.

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2017-02-14T14:19:30+00:00

    Hi all,

    I have another possible solution for you to try:

    Buy a ferrite core like this https://www.amazon.com/Ferrite-Core-Cord-Noise-Suppressor/dp/B0002MQGEK

    and put the display cable through a couple of turns.

    Was this answer helpful?

    0 comments No comments
  4. Anonymous
    2017-02-14T21:03:30+00:00

    Hi

    Same problem, here's what worked for me.

    Changed my router to a dual band and forced the SP4s wireless network adapter to run at 5ghz.

    settings / networking / network adapters / select wireless adapter / right click properties / configure / advanced  / band / 5ghz.

    Worked straight away. Someone on here suggested using a USB wireless adapter at 5ghz plugged into my the SP4 and disabling the SP4s wireless adapter, that s worked for me as well.

    Dosnt explain why it suddenly stopped working but at least it works now.

    This has cost me 11 working days and about £100.00 in bits.

    I love my SP4, somewhat fitting she started working again on Valantines Day ??? Lol

    Ill be following up with MS as really not happy with the whole saga.

    If it hadn't worked it was getting packed up and returned tomorrow ......

    Hope you get yours fixed.

    Neil

    Was this answer helpful?

    0 comments No comments
  5. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.


    Comments have been turned off. Learn more