Surface Pro 3 USB DVD/CD drives and getting them to work together

Anonymous

Have a Samsung USB DVD drive. My Surface Pro 3 will "see" the drive for purposes such as copying files and folder or photos. It will also play a much CD if placed in the drive. However, if I place a DVD or CD with software to install the Surface will just loop and cycle - making a little sort of beeping noise, and that's about it. The device also sort of disappears when this process is going on. I've fiddled around with the AutoPlay settings and nothing seems to make this happy.

I was able to install some of the software I needed by copying the CD info over to a USB hard drive and then running the Setup from there. But, just can't get the machine to run them from the DVD.

I'm new to Windows 8.1, so this probably isn't helping me figure this out. I get the feeling I just have something set wrong somewhere, but I sure can't figure out what it is.

Thanks

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

Answer accepted by question author

Anonymous

Even with a powered USB hub the device can still not get enough power, depending on the device.

What I had to do for my LG DVD LG DVD drives is use a split USB cable. One connection to the device and two USB connections to the hub. The two connections are one for power and one for data. This works great and can be reasonably purchased from 'MONOPRICE.COM'. I don't remember if the SP3 charger has a USB on it, if not you will need a hub. If it does then put on USB port on the SP3 and one on the charger port.

0 comments

Answer accepted by question author

Anonymous

I have had the same issue. The USB3 port on the SP3 isn't providing enough power. Until a fix is provided in the form of a firmware updated, (maybe or maybe not) get yourself a usb3-y cable. Plug the secondary USB cable into the charging port on the AC power adapter.

0 comments

Answer accepted by question author

Anonymous

Is this happening with the SP3 plugged into an AC source?

Does the DVD have a separate power supply?

If it doesn't have an external power supply, the SP3 port might not produce enough power to run it.

0 comments

Answer accepted by question author

Anonymous

The drive does not have enough power for what you want it to do. It does for a few basics but when installing software, the drive has to maintain a fixed RPM level.

I had a Samsung USB DVD drive before and I think mine had an additional dongle on the end to hook up to another USB port for additional power.

I would basically suggest to just continue doing what you are doing by transferring the files onto a USB pendrive and install from there. No moving parts; no additional power needed to operate. It would be a one time function anyhow and not worth changing the drive for.

0 comments

Answer accepted by question author

Barb Bowman 80,805 MVP Volunteer Moderator

my LG external cd/dvd drive acts as if it is being disconnected and reconnected multiple times while i am trying to access files on the optical media. the surface will make its disconnect noise, the folder will close and then it will make the connected device noise and open the folder again. This will happen in the middle of trying to install a program and will error the installation out. I have tried two different drives and they both act the same way.

Try using a POWERED USB hub, or try a Y cable that can plug into the USB charging port on the SP3 power brick. There probably isn't enough power from the USB port on its own.

0 comments

Answer accepted by question author

Anonymous

You actually have a "powered" USB hub now. Look on your power brick for the Pro 3. You will see a USB port. If your DVD writer has a "Y" cable, plug the main plug into the tablet and the "branch" cable into that USB port on the power brick. That will give you the power you need.

Normally, DVD writers are USB 2.0 (Blu-Ray 3.0 only) but newer models are coming out with USB 3.0.

As for external powered USB hubs? Any model you want. They are not technical and are just normal hubs with an external power supply.

There is a chance that the problem you have is the drive does not have enough power to operate. Just use the power brick and try it out.

0 comments

Answer accepted by question author

Anonymous

I thought I'd reply that this problem now appears to be fixed, and I don't have any problem with the USB3 ports on my docking station.

The problem seemed to be resolved after I applied the several Microsoft firmware updates, so make sure you download them all!

0 comments

Answer accepted by question author

Anonymous

Hi all,

just made a discovery: the previously non-connecting external hard drive USB 3.0 now connects, but only when the Surface Pro 3 is connected to power with its power lead.

Although this may be annoying on the road, at least I can now use the drive when power is connected.

David

0 comments

Answer accepted by question author

Anonymous

I am having the same problem as everyone else: my external HDD won't work. It's a 750GB USB 2.0 WD. Even when I plug it into the Surface Pro 3's docking station it won't work.

Ah, finally got it to work: I connected the HDD to one of my monitors, which have powered USB ports, even though they are only USB 1.0.

0 comments

Answer accepted by question author

Anonymous

It will support external optical drives, BUT, the USB port is underpowered.

Make sure that the external drive has a "Y" cable and you will need a powered USB hub to provide the extra power to the drive. Once you do that, the tablet will support most drive models on the market.

0 comments

Answer accepted by question author

Anonymous

I purchased a Samsung Ultra Thin Portable DVD writer. I am trying to load a parts program to use on my surface Pro 3. The SP3 keep saying that it doesn't have enough power. It is plugged into the ac adapter. SE-218

I have the same USB writer. I purchased the following USB Y cable

http://www.amazon.com/StarTech-com-USB2HABMY1-Cable-External-Drive/dp/B003WV5DMO/ref=sr_1_1?s=electronics&ie=UTF8&qid=1407412485&sr=1-1&keywords=USB2HABMY1

Note that it is USB A to mini B, since the Samsung SE-218 uses mini USB cable. Also note that my version is only 1 ft, which is relatively short, but I like it since there is less to carry. They have a 3 ft version. I plug the red one into power supply of the surface pro 3 and it works. I can read and write to DVDs.

0 comments

Answer accepted by question author

Anonymous

The DVD drive is what does not have enough power. On the DVD writer, is there a "Y" cable attached to it. One end goes into the tablet and the other can be plugged into a regular PC or laptop and it is designed to provide more power.

If the DVD writer does not have a "Y" cable, it won't work. There is no other way of boosting the power. The USB 3.0 port has a fixed power output to provide to devices. It cannot be increased.

0 comments

301 additional answers

Anonymous

2015-06-20T19:25:22+00:00

The Eden Project, I did hear about. I don't really go that far in data analysis; just a local weather/river stage report that my city government is concerned about and had asked me to do them. NOAA has a ton of information on that.

My area is under a constant thunderstorm for the last two weeks and Tropical Storm Bill paid a visit and decided to stick around. We have enough water right now to end California's drought 5 times over.

Those are the types of charts I link in within a Word or LibreOffice file and they update which speeds up the report update process. The older software couldn't do that because it was not in the mindset of the creators back then and dial-up was still the way to connect to the world in most cases.

WordStar was outstanding with CP/M but when WordStar 1.0 came out for Windows 3.1, that thing didn't like the fonts. It would work a lot better with the later editions of Windows but 3.1, those two did not get along.

I did aircraft statistics in the Marine Corps along with being a computer tech as well. They combined job title during a manpower reduction but that turned out to be better because I did both 'customer service' and also being the customer. Had two courses with IBM and four courses local "in house". In the military, we have our own schools.

Lotus 1-2-3 and Harvard Graphics 3.0 was what was used for statistical analysis and presentations. Just couldn't beat those two. Then Microsoft kept pushing "Office" to the government and it was chosen later which messed everything up and everything got reshaped and redesigned (for the worst). It is better now. Lotus Notes finally got terminated a few years back and OneNote may take its place now. That would be on a very secure "intranet' setup. That was how 'Notes" got implemented.

I bookmarked your web site and will keep an eye on it. If no storm shows up today, I will fire up the Pro 3 and try out Lotus Smarsuite 9.8 on it and will have a screenshot of WordPro in action. I know that it will work.
Was this answer helpful?

0 comments No comments