Surface Pro 3 battery degradation

Anonymous
2016-05-11T07:37:37+00:00

I've been using Microsoft Surface Pro 3 for a year, and shortly after the warranty expired I noticed my Surface Pro 3 can only last about 1-2 hours after a full charge. At first I thought this was a problem with background process draining the battery so I disabled everything running in the background. It didn't helped. Then I found out about the powercfg utility and run powercfg /batteryreport on it, and this was the result:

A full charge capacity has degraded by over 80% in just few weeks and continue degrading. I tried to "recalibrate" the battery by doing full charge then full drain multiple times, and it didn't helped. Talk with Microsoft via chat support and they insist this was a software problem and reinstalled the driver and asked me to wait few days to see if things improve. Not only it didn't improved, but now my Surface can only last 30 minutes.

Few days after chat (today), I called Microsoft support and they were being extremely unhelpful. Insist that this was a software problem (which the chat support person already did) and it's "perfectly normal" for battery capacity to degrade. I insist that I've already done the software "fixes" and it didn't work and tell them this is definitely hardware problem, but the person on the phone tell me there's nothing I could do except to order the out of warranty exchange (which cost about $560 in my local currency). 

Is there anything else I should do? My country has no Microsoft Store which I could take the machine for them to take a look. Phone/online support were the only option, and none of them could understand the issue.

Surface | Surface Pro | Power and battery

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2016-07-26T21:31:16+00:00

Hello everyone,

Thanks for your continued patience here. We have now completed our testing of the update and it has passed our quality assurance process.

The update, “System Firmware Update - 8/29/2016”, is now available to install from Windows Update.

Before installing this update, ensure that your Surface Pro 3 is plugged directly in to AC power using the standard AC power adapter (do not use the Surface Docking Station), disconnect any USB devices or external monitors, and check that Windows shows a 40% charge or greater when you hover over the icon in the taskbar before you begin.

Once you install the update, please select Restart now (do not shutdown). After your Surface restarts, please manually restart it a second time to complete the process. For more information, please see our Surface Pro 3 Battery FAQ article.

If you’re having trouble charging your Surface, you get a low-battery error, or your Surface turns off when you unplug it, the steps in our Surface battery won’t charge article can help you pinpoint the problem. Should you need any further assistance, please contact us. 

Thanks again.

Greg

Updated 8/29/16.

Was this answer helpful?

100+ people found this answer helpful.
0 comments

1,459 additional answers

Sort by: Oldest
Most helpful Newest Oldest
  1. Anonymous
    2016-08-24T23:02:56+00:00

    More than a month since your post Greg.

    What action? I am now stuck treating my Surface like a desktop because it only lasts about 5 minutes on battery.

    Not good enough.

    J

    Was this answer helpful?

    0 comments
  2. Anonymous
    2016-08-24T23:05:09+00:00

    I'm not sure if this has been discussed in the thread already (at 64 pages long I could have missed it), but an issue I didn't notice until my SP3's battery capacity fell below 300mWh is that when it is under heavy load (including when it is starting up) it draws more power than the AC adapter can provide and the battery had gotten to the point where it was just barely able to cover the shortfall.

    To avoid reaching a point where the Surface was unable to boot-up, I set the "Maximum processor state" to 65%, which seems to keep the system within the limits of what the AC adapter can provide. This option is not available by default in the Power Options for the Surface. However, adding the registry key below will make the option visible in the advanced power options menu.

    HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\bc5038f7-23e0-4960-96da-33abaf5935ec

    Add: DWORD

    Value Name: Attributes

    Value Data: 2

    My battery status now is No Battery Detected.

    Will this Registry tweak help in that case?

    Was this answer helpful?

    0 comments
  3. Anonymous
    2016-08-25T00:17:14+00:00

    Of course they do. They own windows and they compile any report they want without your knowledge or consent. They are fully aware.

    Was this answer helpful?

    0 comments
  4. Anonymous
    2016-08-25T00:21:24+00:00

    I have recently upgraded my 2nd gen i7 Dell laptop to 16GB (although Intel says the chipset won't support more than 8 - guess that's how they wanted you to upgrade) Works like a charm. Also changed HDD to SSD and put in a secondary HDD in the optical bay. Changed thermal paste and cleaned fan. As good as new and battery is still at 50% after 5 years.

    Was this answer helpful?

    0 comments