Surface Pro 7 Slow WiFi

Anonymous
2019-12-28T15:20:10+00:00

Hello everyone,

I am working with my new Surface Pro 7 i5 one or two days now and unfortunately, I still have severe wifi issues after installing all updates. Speed is between 0 and 1,250 kbit/s.

After searching for this issue, I found several entries describing this kind of problem and some workarounds like setting the MIMO Power Safe Mode to a different value. (as described here) I did all this but still, there is no improvement. 

Any other suggestions on this? Is this a known bug? Is there a patch on its way? Is Microsoft working on this?

Any help is greatly appreaciated.

Thanks a lot

Tim

Surface | Surface Pro | Network

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

87 answers

Sort by: Newest
  1. Anonymous
    2020-03-06T07:09:18+00:00

    Did you adjust the setting in the Sp7 driver? I think i posted a link a couple of months ago, this cured the problem on my SP7, at home i have a complete Unifi network with granular control, i had no further issues. Unfortunately im working in Saudi for the next few months and my SP7 is back in UK, but changing that setting meant i was getting internal speeds on wifi of around 550Mbps (measured using the wifi throughput test on unifi). 

    This cured the slow speeds from wakeup on the sp7 completely

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2020-03-06T06:56:17+00:00

    Unfortunately, it's not the testing package that is the issue for me. Nor is my problem one of a slower speed upon wake up.  I have a hardwired machine and three wifi enabled laptops. Only the surface tests out at 20MB/sec, all the others are a minimum of 240MB/sec up to 375MB/sec on the hardwired machine.

    I can reset the router and I get a temporary speed increase on the surface up to 350Mb/sec plus, equally I can reset the router, or do a channel scan - in fact just about any poke of the network at the router or the surface will give me a temporary increase to maximum. But in some time - tens of minutes to maybe an hour or so the speed drops to 20MB/sec.

    All of the other machines test out at the same speed over and over with no decrease to 20, only the surface runs slowly.

    Other speed test packages confirm the issue.

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2020-03-06T06:35:43+00:00

    Thats testing the speed of your internet connection not your actual network speed. There will be too many variables regarding server speed at the other end, etc I would suggest a read of this. 

    https://www.smallnetbuilder.com/basics/lanwan-basics/31220-how-fast-is-your-network-five-ways-to-measure-network-speed

    Was this answer helpful?

    0 comments No comments
  4. Anonymous
    2020-03-06T02:57:37+00:00

    I want to let everyone know my latest testing and it is GREAT news!!

    This testing was all conducted on wireless 802.11 AC  (i don't have AX wifi 6 yet) using my surface pro 7 I7 with 16 gig memory (which should not matter with testing wifi)

    1. DO NOT USE SPEED TEST app by ookla from MICROSOFT STORE!!!    The ookla web page test was a little better but i think ookla has problems.   Totally bogus readings!!!!!  OOKLA last year speed testing was AWESOME but they did something that has screwed up their service last year and OOKLA has not been the same since and I am now dropping ookla from my life them like a lead balloon.                                     
    2. NOW to the good stuff. My router internet is gig speed as indicated here 936 down 947 up
    3. my DEVICE(surface pro 7) speed from Verizon web based app for my device is awesome 357 down 508 up
    4. this is also verified with SPEAKEASY.NET (i used to use this web page a lot but stopped... I am bringing it back into use from now on.  313 down 434 up
    5. so I placed the surface pro to sleep to test again when it awakes.  There is still a problem with Surface pro 7 waking up with speed testiung BUT not like what I though with the bogus OOKLA STORE APP  Verizon web based speeds 105 down and 312 up and from SPEAKEASY.NET web base speed check and 290 down 263 up

    IN conclusion, There is a problem with the speeds when the surface pro 7 wakes up but nothing like the bogus OOKLA app was giving me and I was led to believe.  

    MY suggestions to all for moving forward step by step:

    1. make sure you surface pro 7 is up to date with WINDOWS and SURFACE updates
    2. reboot your router
    3. then reboot your surface pro 7
    4. open a browser and use https://www.verizon.com/speedtest/ (not sure if it works on non verizon network but please try) and also use  https://www.speakeasy.net/speedtest/  (this will work on all networks) your results will make you happy.
    5. then put your surface pro 7 to sleep
    6. then wake your surface up and retest speed tests

    Let me know what your results are....

    Again there is a slow down when waking from sleep but with a gig speed network it is not that bad.  If your band width is smaller your results may be a lot less and waking from sleep may make you pull your hair out...... if so get a faster internet.

    MY results have given me hope for the Surface Pro 7 and I am extremely happy with my purchase.  MICROSOFT needs to fix the wake up wireless issue.

    Was this answer helpful?

    0 comments No comments
  5. Anonymous
    2020-03-05T19:25:13+00:00

    Hello,

    I wanted to add a little fuel to this fire.

    I noticed my surface 7 (i5) was only managing about 20MB/sec on our 50MB copper connection. I lived with it, but yesterday upgraded to fibre.  I get 375MB/sec on my hardwired desktop and over 200MB/sec on an old Dell laptop, and my old ACER core i3 with 802.11ac

    My surface initially showed 375 on speedtest, but some time later was back to 20 MB/sec. Resetting the router bought it back to 375, but, yet again, some time after it was back to 20. If I do a channel scan on the CISCO router, speed goes back to 375 for a while, but then back to 20. 

    Seems like anytime I poke the router the speed temporarily goes up but not for long.  All of this is assuming the various speedtest modules are in fact accurate. I've tried a number of them.

    This is frustrating when a cr@ppy old Dell and a $250 ACER laptop can routinely manage well over 200MB/sec and my Surface7 only 20.

    Microsoft: please fix this!

    Was this answer helpful?

    0 comments No comments