How do I fix automatic repair

Question

How do I fix automatic repair

Daniel Mwaura 0

Context

Automatic Repair couldn’t repair your PC

Press “Advanced options” to try other options to repair your PC, or “shut down” to turn off your PC.

Log file : D:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt

0 comments

3 answers

Your answer

Answer 1

The “Automatic Repair couldn’t repair your PC” screen with SrtTrail.txt means Windows 11 has detected a startup failure and the built-in Startup Repair could not fix it.

The safest next step is to diagnose the startup problem from WinRE (Advanced options) rather than immediately resetting Windows or deleting anything.

1. First try System Restore

From the blue recovery screen:

Advanced options → Troubleshoot → Advanced options → System Restore

If a restore point exists from before the problem started, select it and let Windows restore the system.

2. If System Restore is unavailable, open Command Prompt

Go to:

Advanced options → Troubleshoot → Advanced options → Command Prompt

Your recovery environment is currently showing Windows on D:, because the log is:

D:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt

At Command Prompt, first run:

dir D:\Windows

If you see folders such as System32, SystemApps, etc., D: is your Windows partition.

Then run:

chkdsk D: /f

Let it complete.

After that:

sfc /scannow /offbootdir=D:\ /offwindir=D:\Windows

This checks Windows system files offline.

3. Check the boot configuration

Still in Command Prompt:

bcdedit

Then:

bootrec /scanos

If it finds your Windows installation, tell me the output before making changes to the boot records.

4. Check the SrtTrail log

You can also examine the repair log:

type D:\Windows\System32\Logfiles\Srt\SrtTrail.txt

If it is too long:

notepad D:\Windows\System32\Logfiles\Srt\SrtTrail.txt

Look near the bottom for entries such as:

Root cause found
Boot critical file is corrupt
Corrupt file
Boot manager
Bad driver
Registry
Disk failure

Do not run bootrec /fixmbr, bootrec /fixboot, or delete/rebuild the BCD yet. On a modern Windows 11 UEFI installation, those commands can be unnecessary or produce additional problems if used blindly.

Mathanraj 0 Reputation points

2026-09-11T15:01:41.8733333+00:00

If you want, send me a photo or copy the last 20–30 lines of SrtTrail.txt, and I can identify the likely cause and give you the exact repair commands for your PC.

Answer 2

DaveM121 929K Independent Advisor

Start your PC, just as Windows attempts to load (spinning dots), press and hold Power Button for 5 - 10 seconds to perform a Hard Shut Down

Do this twice

On the third start Windows will boot into the Recovery Environment and from there you can access System Repair, Safe Mode, Command Prompt... etc.

Please try each option one at a time, then see if Windows will start borrectly.

1

If there is an option to uninstall the latest update, that may be the best option.

2

Go to Troubleshoot - Advanced Option - Startup Repair

See if Windows startup can repair itself

3

Go to Troubleshoot - Advanced Option - System Restore

Check to see if you have a restore point you can go back to

Mathanraj 0 Reputation points

2026-09-11T15:00:30.7166667+00:00

If you want, send me a photo or copy the last 20–30 lines of SrtTrail.txt, and I can identify the likely cause and give you the exact repair commands for your PC.

Answer 3

Try these recovery options in order:

On the Automatic Repair screen, select Restart.
- If Windows starts, install the latest Windows updates.
If that does not work, select Advanced options > Continue.
- This exits the recovery screen and tries to continue into Windows.
If Automatic Repair appears again, go to Advanced options > Troubleshoot > Advanced options > Startup Repair.
- Follow the on-screen steps.
- After it finishes, restart and check whether Windows starts normally.
If Startup Repair does not fix it, try System Restore:
- Go to Advanced options > Troubleshoot > Advanced options > System Restore.
- This restores Windows to an earlier working state.
- Personal files are not changed, but recently installed apps and drivers might be removed.
If Windows can still open Command Prompt from recovery and the issue is caused by corrupted system files, run these repairs from an elevated Command Prompt after Windows starts normally:
```
   DISM.exe /Online /Cleanup-image /Restorehealth
   sfc /scannow
```
- Run DISM first, then SFC.
- Do not close the Command Prompt window until sfc /scannow reaches 100%.
If the PC is stuck in a startup issue and recovery options on the device are not enough, start from Windows installation media and open recovery from there:
- Boot from the installation media.
- On Install Windows, select Next > Repair your computer.
- Then select Troubleshoot > Advanced options > Startup Repair.
If the startup issue is severe and Refresh your PC or Reset your PC fails in Windows 8 because of damaged registry hives, Command Prompt can be used to rename the System and Software hives before retrying recovery. Warning: Reset your PC removes all files on the hard drive, and renaming the Software hive can prevent Refresh your PC from working.

If recovery options continue to fail and files need to be copied off first, open Command Prompt, run notepad.exe, then use File > Open as a basic file browser to copy files to a USB drive.