Blue Screen Kernel security check failed

Anonymous

I've had this blue screen on a brand new install of Windows 11, I've updated all drivers, I've also run sfc scan and DISM commands, none returned any errors. I've uploaded the minidump to OneDrive, and I'd appreciate it if anyone could take a look at it and tell me what could be causing this error.

Here's the link to the minidump file: https://1drv.ms/u/s!AtII6RheVqT8hNdiUUUN7wg5OXwsIQ?e=Tqr93R

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

Answer accepted by question author

Anonymous

The computer had BSOD with Windows 11 and Windows 10.

The findings are consistent with malfunctioning hardware.

Some of the steps that were performed earlier in this thread may be repeated.

Testing hardware using software stress tests unfortunately often displays pass when there is malfunctioning hardware (false negative).

Typically swap testing is required.

Download and install one of these temperature monitoring software:

Speccy

https://www.ccleaner.com/speccy

HWMonitor

https://www.cpuid.com/softwares/hwmonitor.html

Speedfan https://www.almico.com/speedfan.php

Run Prime95 https://www.tenforums.com/tutorials/16474-prime95-stress-test-your-cpu.html Test for 3 hours.

Make note of when to abort testing in the link.

Post images or share links into this thread.

Record the continuous testing time and the highest temperature.

Run Furmark https://www.tenforums.com/tutorials/13081-furmark-gpu-stress-test.html Test for 30 minutes.

Make note of when to abort testing in the link.

Post images or share links into this thread.

Record the continuous testing time and the highest temperature.

Run Memtest86 (free version) https://www.memtest86.com/ Run two tests of four passes each (total eight passes)

Take pictures and post images or share links into this thread.

Memtest86 has a feature to create text reports.

If possible, include the text reports with the images in the share links.

Run HD Tune

https://www.hdtune.com/

Post images or share links for results on these tabs:

a) Health

b) Benchmark

c) Full error scan

These can be performed overnight while sleeping:

a) Memtest86

b) HD Tune full error scan

0 comments

54 additional answers

Anonymous

2022-07-19T02:38:41+00:00

I tried the customised settings and left for a while. When I came back it was on the automatic repair screen, and it seems there was a BSOD while I was away. Here's the V2 share link: https://1drv.ms/u/s!AtII6RheVqT8hNdmW5OqX33sxpfi5w?e=b1QfsY
Was this answer helpful?

0 comments No comments
Anonymous

2022-07-18T15:30:24+00:00
HI,

Sorry for the delayed reply.

One of the minidump files points to "AuthenticAMD.sys". It is the AMD CPU driver.

Please try the following.
1. Try to reseat all the components(RAM, Hard drive, Video Card) to the Motherboard.
2. Make sure that you are not overclocking the PC(disable overclocking settings).
3. Update BIOS to the latest version if it's available. If not, reset it to default.
I hope this helps. Feel free to ask back any questions and keep me posted.
Was this answer helpful?

0 comments No comments
Anonymous

2022-07-18T15:01:45+00:00

If there were no performance problems or very slow boot then use all customized test settings except:

[ ] 0x00000004 Randomized low resources simulation.

Test all non-Microsoft drivers.

Test no Microsoft drivers.

If there is no immediate BSOD then open administrative command prompt and type or copy and paste: verifier /querysettings

Post a share link into this thread.

For any BSOD post a new V2 share link.

Run these customized tests for 24 hours.
Was this answer helpful?

0 comments No comments

Anonymous

I ran WDV with the settings you mentioned and had no errors. Then I tried the previous settings after uninstalling Logitech G Hub and again no errors. Here's the query settings:

C:\Windows\system32>verifier /querysettings

Verifier Flags: 0x001a09ab

Standard Flags:

[X] 0x00000001 Special pool. 

[X] 0x00000002 Force IRQL checking. 

[X] 0x00000008 Pool tracking. 

[ ] 0x00000010 I/O verification. 

[X] 0x00000020 Deadlock detection. 

[X] 0x00000080 DMA checking. 

[X] 0x00000100 Security checks. 

[X] 0x00000800 Miscellaneous checks. 

[X] 0x00020000 DDI compliance checking.

Additional Flags:

[ ] 0x00000004 Randomized low resources simulation. 

[ ] 0x00000200 Force pending I/O requests. 

[ ] 0x00000400 IRP logging. 

[ ] 0x00002000 Invariant MDL checking for stack. 

[ ] 0x00004000 Invariant MDL checking for driver. 

[ ] 0x00008000 Power framework delay fuzzing. 

[ ] 0x00010000 Port/miniport interface checking. 

[ ] 0x00040000 Systematic low resources simulation. 

[X] 0x00080000 DDI compliance checking (additional). 

[ ] 0x00200000 NDIS/WIFI verification. 

[ ] 0x00800000 Kernel synchronization delay fuzzing. 

[ ] 0x01000000 VM switch verification. 

[ ] 0x02000000 Code integrity checks.

Internal Flags:

[X] 0x00100000 Extended Verifier flags (internal). 

[X] Indicates flag is enabled.

Boot Mode:

Persistent

Rules:

All rules are using default settings

Extensions:

wdm: rules.all

Verified Drivers:

amdpsp.sys 

amdxe.sys 

amdfendr.sys 

amdsafd.sys 

nvlddmkm.sys 

e2k68cx21x64.sys 

netwtw10.sys 

amdkmdag.sys 

amdacpbus.sys 

amdgpio2.sys 

amdi2c.sys 

acerairplanemodecontroller.sys 

nvvad64v.sys 

nvmoduletracker.sys 

nvvhci.sys 

amdfendrmgr.sys 

logi\_joy\_bus\_enum.sys 

logi\_joy\_xlcore.sys 

etdi2c.sys 

nvhda64v.sys 

amdacpksl.sys 

rtkvhd64.sys 

ibtusb.sys 

dump\_dumpstorport.sys 

dump\_stornvme.sys 

dump\_dumpfve.sys 

amdryzenmasterdriver.sys 

kfeco11x64.sys 

logi\_joy\_vir\_hid.sys

0 comments