Can NOT start up my PC: HP Z440: Prepare Automatic Repair - Diagnosing your PC

After, Searching error codes online,...

1
So, is NOT A problem use a DVD 21H1 Windows 10, in a 20H2 PC ...? TRUE / FALSE

2
RUN **from X: or C:?**3
run just the:
sfc /scannow
without parameters???

I ran:

BCDBoot C:\Windows

I got a Success message

but when went boot getting an error: // DVD boot from was 21H1 but OS is 20H2, is it matters? Following is the Log file,...well?

when went to repair getting:

Logfile:

Startup Repair diagnosis and repair log

---

Last successful boot time: ‎10/‎12/‎2021 6:25:29 AM (GMT)

Number of repair attempts: 40

Session details

---

System Disk = \Device\Harddisk0

Windows directory = C:\Windows

AutoChk Run = 0

Number of root causes = 1

Test Performed:

---

Name: Check for updates

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: System disk test

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Disk failure diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Disk metadata test

Result: Completed successfully. Error code = 0x0

Time taken = 671 ms

Test Performed:

---

Name: Disk metadata test

Result: Completed successfully. Error code = 0x0

Time taken = 16 ms

Test Performed:

---

Name: Target OS test

Result: Completed successfully. Error code = 0x0

Time taken = 16 ms

Test Performed:

---

Name: Volume content check

Result: Completed successfully. Error code = 0x0

Time taken = 93 ms

Test Performed:

---

Name: Boot manager diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: System boot log diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Boot manager generic failure 0xc000000e

Test Performed:

---

Name: Event log diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 32 ms

Test Performed:

---

Name: Internal state check

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Check for installed LCU

Result: Completed successfully. Error code = 0x0

Time taken = 3922 ms

Test Performed:

---

Name: Check for installed driver updates

Result: Completed successfully. Error code = 0x0

Time taken = 1312 ms

Test Performed:

---

Name: Check for pending package install

Result: Completed successfully. Error code = 0x0

Time taken = 2750 ms

Root cause found:

---

A recently serviced boot binary is corrupt.

Repair action: Abort pending update installations

Result: Failed. Error code = 0x82f

Time taken = 4109 ms

---

---

Session details

---

System Disk = \Device\Harddisk1

Windows directory = D:\WINDOWS

AutoChk Run = 0

Number of root causes = 1

Test Performed:

---

Name: Check for updates

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: System disk test

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Disk failure diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Disk metadata test

Result: Completed successfully. Error code = 0x0

Time taken = 735 ms

Test Performed:

---

Name: Disk metadata test

Result: Completed successfully. Error code = 0x0

Time taken = 15 ms

Test Performed:

---

Name: Target OS test

Result: Completed successfully. Error code = 0x0

Time taken = 16 ms

Test Performed:

---

Name: Volume content check

Result: Completed successfully. Error code = 0x0

Time taken = 78 ms

Test Performed:

---

Name: Boot manager diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: System boot log diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Event log diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 31 ms

Test Performed:

---

Name: Internal state check

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Root cause found:

---

Startup Repair has tried several times but still cannot determine the cause of the problem.

---

---

Session details

---

System Disk = \Device\Harddisk1

Windows directory = D:\WINDOWS

AutoChk Run = 0

Number of root causes = 1

Test Performed:

---

Name: Check for updates

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: System disk test

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Disk failure diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Disk metadata test

Result: Completed successfully. Error code = 0x0

Time taken = 734 ms

Test Performed:

---

Name: Disk metadata test

Result: Completed successfully. Error code = 0x0

Time taken = 16 ms

Test Performed:

---

Name: Target OS test

Result: Completed successfully. Error code = 0x0

Time taken = 16 ms

Test Performed:

---

Name: Volume content check

Result: Completed successfully. Error code = 0x0

Time taken = 93 ms

Test Performed:

---

Name: Boot manager diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: System boot log diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Test Performed:

---

Name: Event log diagnosis

Result: Completed successfully. Error code = 0x0

Time taken = 16 ms

Test Performed:

---

Name: Internal state check

Result: Completed successfully. Error code = 0x0

Time taken = 0 ms

Root cause found:

---

Startup Repair has tried several times but still cannot determine the cause of the problem.

---

---

can you tell me what to run on the cmd prompt...???? Can NOT start up my PC: HP Z440

---

When booting up I am in a loop:

---

Prepare Automatic Repair - Diagnosing your PC

I booted UEFI DVDRW Windows 10 21H1 Installation Mediawent to cmd prompthere is:

>>>

Microsoft Windows [Version 10.0.19041.928]

(c) Microsoft Corporation. All rights reserved.

X:\Sources>notepad

X:\Sources>echo %SystemDrive%

X:

X:\Sources>DiskPart

Microsoft DiskPart version 10.0.19041.610

Copyright (C) Microsoft Corporation.

On computer: MININT-212GK9I

DISKPART> List Vol

Volume ### Ltr Label Fs Type Size Status Info

---

Volume 0 C System NTFS Partition 930 GB Healthy

Volume 1 FAT32 Partition 100 MB Healthy Hidden

Volume 2 D NTFS Partition 502 MB Healthy Hidden

Volume 3 E USB DISK FAT32 Removable 57 GB Healthy

DISKPART> exit

Leaving DiskPart...

X:\Sources>c:

C:>cd Windows

C:\Windows>cd System32

C:\Windows\System32>BCDEdit

Windows Boot Manager

---

identifier {bootmgr}

device partition=\Device\HarddiskVolume2

path \EFI\Microsoft\Boot\bootmgfw.efi

description Windows Boot Manager

locale en-US

inherit {globalsettings}

flightsigning Yes

default {default}

resumeobject {dedc9187-c3f7-11eb-ae4d-}

displayorder {default}

toolsdisplayorder {memdiag}

timeout 30

Windows Boot Loader

---

identifier {default}

device partition=C:

path \WINDOWS\system32\winload.efi

description Windows 10

locale en-US

inherit {bootloadersettings}

recoverysequence {34cac3b1-b95a-11eb-a6b3-}

displaymessageoverride Recovery

recoveryenabled Yes

isolatedcontext Yes

flightsigning Yes

allowedinmemorysettings 0x15000075

osdevice partition=C:

systemroot \WINDOWS

resumeobject {dedc9187-c3f7-11eb-ae4d-}

nx OptIn

bootmenupolicy Standard

C:\Windows\System32>

can you tell me what to run on the cmd prompt...????

Run from X:/.../ when boot DVD Windows 10

Or from...? Or not matter?

https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/bcdboot-command-line-options-techref-di

Thanks for your reply

I think locale is en_US... i have us keyboard

I have 2 X SSD + 1 X HDD DATA

If disconnect ALL except system SSD C:/ Drive

1

(Btw take out power cord and I have to disconnect sata data or sata power cable or both or any??)

IF I HAVE C:/ AND EFI PARTITIONS

2

I have assign letter to efi partition and run what commands... in command prompt? Please Only commands insert here

3

About the following, you suggest run if not work above? Or try first these... below... and if not working the above you say?

bootrec /fixmbr

bootrec /fixboot

bcdedit /export c:\bcdbackup

attrib c:\boot\bcd -h -r -s

ren c:\boot\bcd bcd.old

bootrec /rebuildbcd

Well, I think it is D: for you. Try...

DIR D:\ /a

You should see familiar folders, especially a Windows, Users, & Program Files folder. But the problem is that when you get to...

REN D:\boot\bcd bcd.old

I don't think a folder named Boot exists. And it's unlikely your BCD is anywhere on the Windows drive. It will be on EFI or System Reserved. You have to try it the way I wrote. The simplest form of the command is...

BCDBoot  D:\Windows

But, if your installed language is not en-US, do the BCDEdit to see what your locale is & add it to the BCDBoot in the /L parameter. You'd end up like this...

BCDBoot  D:\Windows /L en-US <<<But use your locale not mine

It's only if that won't work that we need worry about the rest.