Wifi problems

Anonymous
2021-06-03T12:12:14+00:00

Hello,

I need some real help as HP support doesn’t seem to know how to help and maybe it’s a windows problem.

I purchased an HP laptop 15s-eq2017AU about 2 weeks ago and I have wifi problems I cant fix.

 I am trying to keep it short. My internet disconnects or being connected without Internet etc. Sometimes it works well with normal speed, then all of a sudden I have a speed drop down to 4mbps/02mbps and shortly after I drop out of internet. Only my new laptop has this issue, all other devices, about 10, have no problems.

I have moved all my devices to 2.4Ghz except this laptop which is on 5Ghz. This made my laptop stable but I cannot connect to 2.4Ghz without problems.

Troubleshoot says various things like Wifi doesn’t have a valid IP configuration, network cable is not properly plugged in or may be broken, Problem with wireless adapter or access point or default gateway not available. Sometimes it fixes IP issue, sometimes it doesn’t. Troubleshoot will always reset my network driver. I did 2 network resets manually too without success.

Yesterday I did a troubleshoot and I had that blue screen: System Thread Exception not handled, what failed: rtwlane6.sys which is my network adapter I am pretty sure. After I restarted it was deactivated. Whats that about?

I tried static IP, DNS, uninstalled driver numerous times, Power is set to best performance, did the prompt commands reset, release, renew flush, ran the HP hardware diagnostics which all passed.

I was researching more and found an old post in this community that made me think.

The Wifi icon in the lower bar and it doesn’t matter if its 2.4 or 5Ghz, sometimes it says Local area connection which then is Public, sometimes it says my normal network (netgear) which then is private. When 2.4Ghz is on local network, speed drops and it doesn’t take long to disconnect then. But 5G runs still fast and fine.

I also have sometimes that laptop icon instead of Wifi icon with 5Ghz and I am still connected. When I am disconnected I have that round ball thingy. Laptop is not wired.

As said as long as I am on 5Ghz all is fine despite the icon change and network status. I doubt its my router settings since all other devices are fine. I did try another modem today and had around 5 devices on each network and my laptop didnt work well on both networks.

My laptop is very fresh, haven’t installed many 3^rd^ party apps, only whats app, inSSIDer Wifi analyzer which both were installed because of the issue and Bitdefender Internet security. Issue was before I installed it. I do have Office 2007 but thats not a 3rd party I assume.

Any thoughts would be fantastic. Thanks for your time.

Silke

Windows for home | Windows 10 | Internet and connectivity

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

82 answers

Sort by: Newest
  1. Anonymous
    2021-06-05T02:15:50+00:00

    Hi ThornySeeker6 -

    Yes you can try that steps, but I suggest that you create a restore point before you perform that steps so that in case you encounter an error or some complications, you can reverse the changes by going to the restore point that you created.

    https://support.microsoft.com/en-us/windows/cre...

    Thank you,

    Jerico T.

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2021-06-05T01:49:28+00:00

    Disable Receive Segment Coalescing (RSC)

    Open PowerShell as admin and run:

    Get-NetAdapter

    Disable-NetAdapterRsc -Name "wifi card name from the previous command"

    For example:
    Disable-NetAdapterRsc -Name WiFi
    Disable-NetAdapterRsc -Name "Wi-Fi"

    If I wanted to enable it, instead of Disable I just write Enable-....?

    I just wait until you answer, its itching me to try it but I better wait for you. :)

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2021-06-05T01:33:59+00:00

    Hi Jerico,

    Unfortunately problem is not solved at all. After reading a bit more, what are the chances that "Disable Receive Segment Coalescing (RSC)" could fix it? And if so, how would I do that?

    They had terrible slow speed but they were sure they didnt have a hardware problem as they were able to fix it for a short while.

    Its a bit different in my case I think; my network driver gets constantly reset during troubleshoot or HP online assistance without fixing anything, IP issues and so on. And again, its only 2.4Ghz and that is only because I have only this laptop connected to 5GHz, if I hade more on this network, Id have the same issues here too.

    So frustrating this laptop.
    Cheers

    Was this answer helpful?

    0 comments No comments
  4. Anonymous
    2021-06-04T13:32:24+00:00

    Hi ThornySeeker6 -

    Thank you for your patience and I'm glad that your computer is now working fine.

    Have a great day!

    Regards,

    Jerico T.

    Was this answer helpful?

    0 comments No comments
  5. Anonymous
    2021-06-04T12:51:15+00:00

    Well, so far so good but will have to wait and see again.

    It wasnt that simple first to install. I did the USB install, I should have waited for your reply.

    First I started from BIOS but it said the upgrade option isnt available if you start your computer using Windows installation media.

    I ended up just going on my D Drive and clicked setup and it worked.

    I did uninstall my Bitdefender as suggested in your video.

    My 2.4GHz initially was super slow but it didn't disconnect. I did all windows updates and for now I am at max speed. I will observe tomorrow when more devices are connected again.

    Thanks heaps, even if it doesn't work because its actually the hardware or so, your help is great.

    Cheers

    Was this answer helpful?

    0 comments No comments