Error 0x8007000d installing windows updates

Error 0x8007000d installing windows updates

Greetings @MojoBoingo,

No chance that your name was a reference to the group "Oingo Boingo" by chance? LOL! Anyways, this is the solution that had helped me with the issues with all dealings with the entire featured update "2021-02 Cumulative Update Preview for Windows 10 Version 20H2 for x64-based Systems (KB4601382)". Might I add that this specific situation had spun me into a world of pissed off that I had never experienced in my life, as it had also caused my drives to fail and corrupt & had also been a job for me in the span of over 6 days. In other words, I had to Nuke everything with DBAN, short for Dariks Boot and Nuke. The name explains everything, no need for any jibber-jabber: https://dban.org/. "READ INSTRUCTIONS CAREFULLY! I ASSUME NO RESPONSIBILITY FOR THOSE WHO DO NOT PAY ATTENTION OR READ" "IF YOU DO NOT KNOW WHAT YOU ARE DEALING WITH, DO NOT ATTEMPT THIS"

Working to repair the corrupted partitions of the featured update is messy, and is not guaranteed to work. So, since the DBAN has to be run from startup & booted through the BIOS and requires many hours, let it run to ensure a clean installation. Once everything has been wiped, please ensure that your Windows .ISO is on an ultra thumb drive and has been set as a bootable device & inserted into your most direct 3.0 USB slot. My mobo has a dedicated BIOS USB slot on it, I tend to use this for any type of system install, Windows/Drivers, etc. Boot this from the BIOS and reinstall everything to your desired drives. Ensure to delete and not format any drives when reinstalling Windows, as formatting will cause the drives to lose their readable volumes.

Be careful when back up and running, and prior to any updates, do this:

Follow these steps to stop Windows 10 updates: Fire up the Run command ( Win + R ). Type in “services. msc” and hit Enter. Select the Windows Update service from the Services list. Click on the “General” tab and change the “Startup Type” to “Manual or Disable”. Restart your machine.

Then check periodically for updates for the failed feature update, without going to that failed feature update. Microsoft should remove these damaging updates.

Hope this helps! I'm nobody special but an old geek LOL!

****Specs****

OS Name Microsoft Windows 10 Pro

Version 10.0.19042 Build 19042

OS Manufacturer Microsoft Corporation

System Type x64-based PC

Processor AMD Ryzen 7 2700X Eight-Core Processor, 3700 Mhz, 8 Core(s), 16 Logical Processor(s)

BIOS Version/Date American Megatrends Inc. 4007, 12/8/2020

BIOS Mode Legacy

BaseBoard Manufacturer ASUSTeK COMPUTER INC.

BaseBoard Product ROG STRIX B450-F GAMING II

Platform Role Desktop

Installed Physical Memory (RAM) 32.0 GB

Total Physical Memory 31.9 GB

Available Physical Memory 25.1 GB

Total Virtual Memory 36.9 GB

Available Virtual Memory 24.6 GB

Page File Space 5.00 GB

Hyper-V - VM Monitor Mode Extensions Yes

Hyper-V - Second Level Address Translation Extensions Yes

Hyper-V - Data Execution Protection Yes

Joshua "Jay Prowaves" Landerfelt"

Error 0x8007000d installing windows updates

My method above should handle these errors as well. I had seen these codes as well during my repair.

I do hope that this helps you, Daniel.

Error 0x8007000d installing windows updates

Happy for you but I don't have that installed.

Greetings @MojoBoingo,

No chance that your name was a reference to the group "Oingo Boingo" by chance? LOL! Anyways, this is the solution that had helped me with the issues with all dealings with the entire featured update "2021-02 Cumulative Update Preview for Windows 10 Version 20H2 for x64-based Systems (KB4601382)". Might I add that this specific situation had spun me into a world of pissed off that I had never experienced in my life, as it had also caused my drives to fail and corrupt & had also been a job for me in the span of over 6 days. In other words, I had to Nuke everything with DBAN, short for Dariks Boot and Nuke. The name explains everything, no need for any jibber-jabber: https://dban.org/. "READ INSTRUCTIONS CAREFULLY! I ASSUME NO RESPONSIBILITY FOR THOSE WHO DO NOT PAY ATTENTION OR READ" "IF YOU DO NOT KNOW WHAT YOU ARE DEALING WITH, DO NOT ATTEMPT THIS"

Working to repair the corrupted partitions of the featured update is messy, and is not guaranteed to work. So, since the DBAN has to be run from startup & booted through the BIOS and requires many hours, let it run to ensure a clean installation. Once everything has been wiped, please ensure that your Windows .ISO is on an ultra thumb drive and has been set as a bootable device & inserted into your most direct 3.0 USB slot. My mobo has a dedicated BIOS USB slot on it, I tend to use this for any type of system install, Windows/Drivers, etc. Boot this from the BIOS and reinstall everything to your desired drives. Ensure to delete and not format any drives when reinstalling Windows, as formatting will cause the drives to lose their readable volumes.

Be careful when back up and running, and prior to any updates, do this:

Follow these steps to stop Windows 10 updates: Fire up the Run command ( Win + R ). Type in “services. msc” and hit Enter. Select the Windows Update service from the Services list. Click on the “General” tab and change the “Startup Type” to “Manual or Disable”. Restart your machine.

Then check periodically for updates for the failed feature update, without going to that failed feature update. Microsoft should remove these damaging updates.

Hope this helps! I'm nobody special but an old geek LOL!

****Specs****

OS Name Microsoft Windows 10 Pro

Version 10.0.19042 Build 19042

OS Manufacturer Microsoft Corporation

System Type x64-based PC

Processor AMD Ryzen 7 2700X Eight-Core Processor, 3700 Mhz, 8 Core(s), 16 Logical Processor(s)

BIOS Version/Date American Megatrends Inc. 4007, 12/8/2020

BIOS Mode Legacy

BaseBoard Manufacturer ASUSTeK COMPUTER INC.

BaseBoard Product ROG STRIX B450-F GAMING II

Platform Role Desktop

Installed Physical Memory (RAM) 32.0 GB

Total Physical Memory 31.9 GB

Available Physical Memory 25.1 GB

Total Virtual Memory 36.9 GB

Available Virtual Memory 24.6 GB

Page File Space 5.00 GB

Hyper-V - VM Monitor Mode Extensions Yes

Hyper-V - Second Level Address Translation Extensions Yes

Hyper-V - Data Execution Protection Yes