Threads Exceptions BSOD after Windows reinstall

Anonymous
2023-08-21T17:25:05+00:00

.zip dump file: https://drive.google.com/file/d/1r4i-TIIkrmbFzS6mmtHa9buEZwk8-pJA/view?usp=sharing

I have a lot of BSOD recently from IRQL, Resource not owned, DPC Watchdog, and Kernel Security Check Failure. This started happening occassionally about 2 months ago and become more and more frequent. There is no major update like BIOS or driver that I believe caused the problem

From Windbg, it has been narrowed down to be a thread exception problem where a program tries to access or release a thread it has no access to. I ran verifier for 24 hours to get the same types of BSOD at the same frequency.

There is no driver verifier violation from BSOD and in the dump files (using recommended verifier settings) from windbg, so perhaps the driver is not the issue. Often the debugger say the culprit is various programs from sysinternals, my VPN, or a random .exe process. I did a full reinstall using media creation tool that removes all apps and personal files. I thought this was a problem with corrupted windows file that sfc or dism or chkdsk could not repair or detect. I still have the problem of getting BSOD every few hours (sometimes every few minutes) after the reinstall, but windbg gives a more consistent blame: ntkrnlmp.exe

This is followed with nt!ExpReleaseResourceSharedForThreadLite+(Hex number)

I have the newest bios from HP and windows is up to date

BSOD can happen instantly or is followed by severe lag a few seconds before it happens. There is no overheating by the CPU (hover around 70C, can spike to 90C but drop down to 60C quickly). Did windows memory integrity check, both RAM stick pass. Have not done memtest86 and prefer not to unless there is a strong reason of RAM problem

HP hardware diagnostic did not return any error (the one you run without going into windows)

A good pattern I see is that sfc /scannow ocassionally reports and repairs a corrupted file (but not all the time, even after a BSOD)

The following is the CBS folder with the log. Maybe the file that it repairs can help solve the problem: https://drive.google.com/drive/folders/1XEZLPCoyGIBh0-KF-kHr1eH6SJc8vgcR?usp=sharing

My computer is an HP Laptop about 3 years old, AMD Ryzen 5500u, 32 GB RAM (2 x 16GB Crucial 3200MHz) DDR4, no dedicated GPU, 2TB Crucial SSD (new SSD, no bad sectors.. BSOD also happens before I upgraded my SSD)

BIOS: UEFI
BIOS Version/Date: AMI F.30, 4/21/2023

Processor AMD Ryzen 5 5500U with Radeon Graphics, 2100 Mhz, 6 Core(s), 12 Logical Processor(s)

SMBIOS Version 3.3

Windows Version 10.0.19045 Build 19045 (Windows Home)

System Model HP Laptop 14-fq1xxx

Let me know if any of the links are not working of if the dump file is corrupted

Thx

Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

52 answers

Sort by: Most helpful
  1. DaveM121 933.9K Reputation points Independent Advisor
    2023-08-24T09:01:32+00:00

    Your minidump files all just indicate RAM errors, there is nothing else listed, and I do not see Driver Verifier enabled in those dump files.

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2023-08-24T08:57:40+00:00

    Link to new minidumps: https://drive.google.com/drive/folders/1AZo0j7ZrDSwHMk5rp5WTXPszCa9XpDZs?usp=sharing

    Link to the V2 log collector: https://drive.google.com/file/d/1i0nbSmLwcMuLmBDu0sC6QOp2V5B3epsz/view?usp=sharing

    only RAM used: PartNumber=CT16G4SFD832A.M16FRS (slot 1)

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2023-08-24T06:47:00+00:00

    I'm not able to follow the testing or results and will follow on the sidelines.

    Was this answer helpful?

    0 comments No comments
  4. Anonymous
    2023-08-24T06:43:24+00:00

    b)

    According to wmic memeorychip list full, this was the Slot 1 (left) Dimm [could be useful for future threads]

    Is there any tests I could do overnight for today?

    Was this answer helpful?

    0 comments No comments
  5. Anonymous
    2023-08-24T06:40:28+00:00

    Please confirm:

    a) The RAM module CT16G4SFRA32A.C16FP was the only installed module and there were BSOD

    b) The RAM module CT16G4SFD832A.M16FRS was the only installed module and there were BSOD

    c) When testing the modules were in the same DIMM

    How come V2 log collector links were not posted?

    If possible, please post new V2 for BSOD with each RAM module in the same DIMM.

    Was this answer helpful?

    0 comments No comments