The description for Event ID 153 from source nvlddmkm cannot be found

Anonymous
2024-05-27T01:27:49+00:00

Hello,

I have been plagued by countless annoying random game crashes the past months with my pc with all pointing out to this error (from event viewer) when they occur: "The description for Event ID 153 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event: 

\Device\00000092

Reset TDR occurred on GPUID:100

The message resource is present but the message was not found in the message table"

Have tried numerous possible solutions already from forums, but with no luck.. Fortnite and many other games crash after random intervals. Can anyone suggest a solution for this?

My specs are the following:

Processor Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz

Installed RAM G-SKILL F4 3200-C16 32,0 GB DDR4

GPU EVGA GTX 980 Superclocked ACX 2.0

Drives Patriot M.2 P300 512GB and Seagate Hybrid HDD 4TB

Motherboard GIGABYTE H510M H V2

Microsoft Windows 11 Professional (x64) Build 22631.3593 (23H2)

Have to note that i recently replaced almost all parts from the pc due to a previous motherboard burnout which killed many components, expect the PSU (which was repaired by the technician) and GPU (which the technician said was saved from the burnout) and the Hybrid HDD (have this HDD since 2016). Apart from this, i restored my windows partition through Macrium Reflect image backup (from the Hybrid HHD saved backup).

Thanks in advance for any possible solutions to this, if any!

Windows for home | Windows 11 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

97 answers

Sort by: Most helpful
  1. Anonymous
    2024-06-23T02:04:01+00:00

    Hi *,

    I would like to share my experience regarding the issue mentioned above.

    I have an older Dell OptiPlex 9020 with the following configuration:

    • Intel Core i7 4770 @ 3.40GHz (original)
    • 0PC5F7 motherboard (Q87 chipset, original)
    • 32 GB of DDR3 RAM (2x SK Hynix HMT41GU6MFR8C-PB, original, and 2x Micron Technology 16JTF1G64AZ-1G6E1)
    • Western Digital WDS100T2B0A-00SM50 SSD
    • HL-DT-ST DVD+-RW GHB0N optical drive (original)
    • AMD Radeon HD 8550 OEM GPU (original)

    Despite its age, this PC still performs well for many tasks. A week ago, I decided to do a budget upgrade. Among various YouTube videos, the "2020 Dell Optiplex GPU Upgrade Guide" by RA Visuals was particularly helpful. After researching the market for used GPUs, I purchased a used Nvidia GTX 1650 Super. It arrived a day ago, and I installed it in my PC, powering it with a SATA to 6+2 Pin Power Cable (as recommended in the video). Initially, everything seemed fine. I installed the latest drivers from Nvidia (version 555.99) and noticed that the CPU cooler was running at high RPMs and became noisy.

    In its original configuration with the AMD GPU, it was relatively quiet. Additionally, I encountered some user permission issues in Windows 10 Pro, which led me to the event viewer and the error mentioned in this topic.

    I tried various solutions, including permission workarounds and memory checks suggested by other users, but none were successful.

    After some troubleshooting, I found on the Nvidia website (https://www.nvidia.com/Download/Find.aspx?lang=en-us) that you can download the standard (non-DCH) driver. I tried the latest one (dated September 20, 2021), and it completely resolved the nvlddmkm issue. It has been 8 hours with no issues, and games are running well. However, the CPU fan still operates at higher RPMs, and the CPU temperature remains around 70-80°C. When I open Task Manager, CPU utilization drops below 20%, and the temperature falls to 40°C. Unfortunately, after 2-3 minutes, Task Manager crashes, and CPU utilization rises again. I am planning to reinstall Windows to see if that resolves the issue.

    Based on my experience, it appears that the problem may be related to Nvidia's DCH drivers.

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments
  2. Anonymous
    2024-06-21T17:28:59+00:00

    Thanks for your input. More and more I'm thinking this is a driver issue. But I did swap some hardware so further testing is needed. So ridiculous these issues after paying $2K for a GPU.

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments
  3. Anonymous
    2024-06-21T15:12:53+00:00

    So are you still experiencing nvlddmkm now??

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments
  4. Anonymous
    2024-06-18T13:48:30+00:00

    Unfortunately no. I opened a case with Nvidia and ASUS and they're trying to help. They say:

    Please note that nvlddmkm is an error code from Windows itself and not an actual diagnostic of any hardware, It may refer to different hardware and incase you need reference you may need to check forums from Microsoft https://answers.microsoft.com/en-us/windows/forum/all/fixed-nvlddmkm-gamingvideo-crash-error-bad-ram/d81304c3-78ef-45a9-ba67-93cf12df0cd3

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments
  5. Anonymous
    2024-06-10T09:59:18+00:00

    I had the XMP profile disabled hy default but the crashes still occured. Now my PC stopped working and today it will be delivered to the technician. I assume it was due to hardware damage.

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments