cloned OS drive "System Reserved" partition Not 100% afterwards.

Anonymous
2024-06-24T15:29:41+00:00

Hi,

I cloned my OS drive twice to move to a newer hardware. But the last time, it seems the "System Reserved" partition of the drive had some issues.  1st: it is not showing "System Reserved" on that partition.  2nd: the following attributes "system, Active, MBR" are not on it and shows only "Primary".  My PC still boots up, but the whole purpose of this exercise was to get compatible to install Windows 11 and upgrade the OS drive with new and faster hardware.  My questions are:

Is there anything I can do to fix it other than re-installing the OS? 

Is this going to cause any issue with upgrade to Windows 11? 

See below properties of this partition.  

Device SCSI\Disk&Ven_NVMe&Prod_CT2000T705SSD3\5&2384875e&0&000000 was not migrated due to partial or ambiguous match.

Last Device Instance Id: SCSI\Disk&Ven_Samsung&Prod_SSD_870_QVO_1TB\4&fa535c2&0&000000

Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}

Location Path:

Migration Rank: 0xF000FF001001F020

Present: false

Status: 0xC00007196/15/2024 10:51:31 AM Device not migrated

6/15/2024 10:51:31 AM Device configured (disk.inf)

Device SCSI\Disk&Ven_NVMe&Prod_CT2000T705SSD3\5&2384875e&0&000000 was configured.

Driver Name: disk.inf

Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}

Driver Date: 06/21/2006

Driver Version: 10.0.19041.4355

Driver Provider: Microsoft

Driver Section: disk_install.NT

Driver Rank: 0xFF0007

Matching Device Id: GenDisk

Outranked Drivers:

Device Updated: false

Parent Device: PCI\VEN_C0A9&DEV_542B&SUBSYS_2B00C0A9&REV_00\4&2ec11bf&0&000A

6/15/2024 10:51:31 AM Device started (disk)

Device SCSI\Disk&Ven_NVMe&Prod_CT2000T705SSD3\5&2384875e&0&000000 was started.

Driver Name: disk.inf

Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}

Service: disk

Lower Filters:

Upper Filters:

Thank you.

Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Ramesh 181.8K Reputation points Volunteer Moderator
2024-07-11T15:15:35+00:00

You're welcome, Givi. Glad to have helped. 👍

You may close this thread by marking helpful posts as answers if there are no further questions. How to mark Your question as "Answered".

Was this answer helpful?

2 people found this answer helpful.
0 comments

56 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2024-07-06T00:29:28+00:00

    Hi Ramesh,

    Thank you so much for getting back with me. Please see below output from the command you sent. Anything else please let me know.

    Microsoft Windows [Version 10.0.19045.4598]

    (c) Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>BCDEDIT /enum all

    Firmware Boot Manager

    identifier {fwbootmgr}

    displayorder {bootmgr}

    timeout 1

    Windows Boot Manager

    identifier {bootmgr}

    device partition=C:

    path \EFI\Microsoft\Boot\bootmgfw.efi

    description Windows Boot Manager

    locale en-us

    inherit {globalsettings}

    default {current}

    resumeobject {723a7840-2b26-11ef-9a24-d28ca8647453}

    displayorder {current}

    toolsdisplayorder {memdiag}

    timeout 30

    Windows Boot Loader

    identifier {current}

    device partition=C:

    path \WINDOWS\system32\winload.efi

    description Windows 10

    locale en-us

    inherit {bootloadersettings}

    isolatedcontext Yes

    allowedinmemorysettings 0x15000075

    osdevice partition=C:

    systemroot \WINDOWS

    resumeobject {723a7840-2b26-11ef-9a24-d28ca8647453}

    nx OptIn

    bootmenupolicy Standard

    Resume from Hibernate

    identifier {723a7840-2b26-11ef-9a24-d28ca8647453}

    device partition=C:

    path \WINDOWS\system32\winresume.efi

    description Windows Resume Application

    locale en-us

    inherit {resumeloadersettings}

    isolatedcontext Yes

    allowedinmemorysettings 0x15000075

    filedevice partition=C:

    filepath \hiberfil.sys

    bootmenupolicy Standard

    debugoptionenabled No

    Resume from Hibernate

    identifier {8740b227-be06-11ee-b8d0-97a0c5375827}

    device unknown

    path \WINDOWS\system32\winresume.efi

    description Windows Resume Application

    locale en-us

    inherit {resumeloadersettings}

    isolatedcontext Yes

    allowedinmemorysettings 0x15000075

    filepath \hiberfil.sys

    bootmenupolicy Standard

    debugoptionenabled No

    Windows Memory Tester

    identifier {memdiag}

    device partition=C:

    path \EFI\Microsoft\Boot\memtest.efi

    description Windows Memory Diagnostic

    locale en-us

    inherit {globalsettings}

    badmemoryaccess Yes

    EMS Settings

    identifier {emssettings}

    bootems No

    Debugger Settings

    identifier {dbgsettings}

    debugtype Local

    RAM Defects

    identifier {badmemory}

    Global Settings

    identifier {globalsettings}

    inherit {dbgsettings} 

                        {emssettings} 

                    {badmemory}

    Boot Loader Settings

    identifier {bootloadersettings}

    inherit {globalsettings} 

                        {hypervisorsettings}

    Hypervisor Settings

    identifier {hypervisorsettings}

    hypervisordebugtype Serial

    hypervisordebugport 1

    hypervisorbaudrate 115200

    Resume Loader Settings

    identifier {resumeloadersettings}

    inherit {globalsettings}

    C:\WINDOWS\system32>

    Regartds,

    Givi

    Was this answer helpful?

    0 comments
  2. Ramesh 181.8K Reputation points Volunteer Moderator
    2024-07-05T03:13:19+00:00

    Hi Givi,

    1. Please open Disk Management and post a screenshot.
    2. run the "BCDEDIT /enum all" command from admin Command Prompt and post the output here.

    Was this answer helpful?

    0 comments
  3. Anonymous
    2024-07-04T19:05:33+00:00

    Hi Ramesh,

    Sorry for the delay. I just did not want to jump into it. So, I ran the below command to see what it says, and I get the "Cannot find OS partition(s) for disk 1" response. Also, how do I find the values for the source and the destination : [/map:<source>=<destination>] ?

    C:\WINDOWS\system32>MBR2GPT /validate /disk:1 /allowFullOS

    MBR2GPT: Attempting to validate disk 1

    MBR2GPT: Retrieving layout of disk

    MBR2GPT: Validating layout, disk sector size is: 512 bytes

    Cannot find OS partition(s) for disk 1

    C:\WINDOWS\system32>

    Thank you much

    Givi

    Was this answer helpful?

    0 comments
  4. Ramesh Srinivasan 87,875 Reputation points Independent Advisor
    2024-06-25T02:57:22+00:00

    Hi Givi,

    The system is compatible with Windows 11. However, "Disk 1" needs to be converted to GPT.

    See MBR2GPT (offline method) in this article or the previous link I posted.

    https://www.windowscentral.com/how-convert-mbr-...

    As stated earlier, it's suggested to backup your data just in case.

    Standard Disclaimer: There is a link to a non-Microsoft website. The page appears to provide accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as PUPs (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

    Was this answer helpful?

    0 comments