cloned OS drive "System Reserved" partition Not 100% afterwards.

Anonymous
2024-06-24T15:29:41+00:00

Hi,

I cloned my OS drive twice to move to a newer hardware. But the last time, it seems the "System Reserved" partition of the drive had some issues.  1st: it is not showing "System Reserved" on that partition.  2nd: the following attributes "system, Active, MBR" are not on it and shows only "Primary".  My PC still boots up, but the whole purpose of this exercise was to get compatible to install Windows 11 and upgrade the OS drive with new and faster hardware.  My questions are:

Is there anything I can do to fix it other than re-installing the OS? 

Is this going to cause any issue with upgrade to Windows 11? 

See below properties of this partition.  

Device SCSI\Disk&Ven_NVMe&Prod_CT2000T705SSD3\5&2384875e&0&000000 was not migrated due to partial or ambiguous match.

Last Device Instance Id: SCSI\Disk&Ven_Samsung&Prod_SSD_870_QVO_1TB\4&fa535c2&0&000000

Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}

Location Path:

Migration Rank: 0xF000FF001001F020

Present: false

Status: 0xC00007196/15/2024 10:51:31 AM Device not migrated

6/15/2024 10:51:31 AM Device configured (disk.inf)

Device SCSI\Disk&Ven_NVMe&Prod_CT2000T705SSD3\5&2384875e&0&000000 was configured.

Driver Name: disk.inf

Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}

Driver Date: 06/21/2006

Driver Version: 10.0.19041.4355

Driver Provider: Microsoft

Driver Section: disk_install.NT

Driver Rank: 0xFF0007

Matching Device Id: GenDisk

Outranked Drivers:

Device Updated: false

Parent Device: PCI\VEN_C0A9&DEV_542B&SUBSYS_2B00C0A9&REV_00\4&2ec11bf&0&000A

6/15/2024 10:51:31 AM Device started (disk)

Device SCSI\Disk&Ven_NVMe&Prod_CT2000T705SSD3\5&2384875e&0&000000 was started.

Driver Name: disk.inf

Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}

Service: disk

Lower Filters:

Upper Filters:

Thank you.

Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Ramesh 181.8K Reputation points Volunteer Moderator
2024-07-11T15:15:35+00:00

You're welcome, Givi. Glad to have helped. 👍

You may close this thread by marking helpful posts as answers if there are no further questions. How to mark Your question as "Answered".

Was this answer helpful?

2 people found this answer helpful.
0 comments

56 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2024-07-11T14:37:46+00:00

    Hi Ramesh,

    The first part went OK, see below. But the disk partition is in use, so it did not take the id. It says use OVERRIDE parameters. So, please let me know . Thank you.

    Microsoft DiskPart version 10.0.22621.1

    Copyright (C) Microsoft Corporation.

    On computer: BADASSPC

    DISKPART> list disk

    Disk ### Status Size Free Dyn Gpt

    Disk 0 Online 931 GB 0 B

    Disk 1 Online 1863 GB 101 MB *

    Disk 2 Online 1863 GB 931 GB

    Disk 3 No Media 0 B 0 B

    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> list part

    Partition ### Type Size Offset

    Partition 1 System 500 MB 1024 KB

    Partition 2 Primary 1861 GB 501 MB

    Partition 3 Recovery 953 MB 1861 GB

    DISKPART> select part3

    Microsoft DiskPart version 10.0.22621.1

    DISK - Shift the focus to a disk. For example, SELECT DISK.

    PARTITION - Shift the focus to a partition. For example, SELECT PARTITION.

    VOLUME - Shift the focus to a volume. For example, SELECT VOLUME.

    VDISK - Shift the focus to a virtual disk. For example, SELECT VDISK.

    DISKPART> select part 3

    Partition 3 is now the selected partition.

    DISKPART> set id=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7

    DiskPart successfully set the partition ID.

    DISKPART> gpt attributes=0x0000000000000000

    DiskPart successfully assigned the attributes to the selected GPT partition.

    DISKPART> exit

    Leaving DiskPart...

    C:\Windows\System32>diskpart

    Microsoft DiskPart version 10.0.22621.1

    Copyright (C) Microsoft Corporation.

    On computer: BADASSPC

    DISKPART> list disk

    Disk ### Status Size Free Dyn Gpt

    Disk 0 Online 931 GB 0 B

    Disk 1 Online 1863 GB 1024 KB *

    Disk 2 Online 1863 GB 931 GB

    Disk 3 No Media 0 B 0 B

    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> list part

    Partition ### Type Size Offset

    Partition 1 System 500 MB 1024 KB

    Partition 2 Primary 1861 GB 501 MB

    Partition 3 Primary 1053 MB 1861 GB

    DISKPART> select part 3

    Partition 3 is now the selected partition.

    DISKPART> set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac

    Virtual Disk Service error:

    The device is in use.

    The selected volume or partition is in use.

    To continue with the operation use the OVERRIDE parameter.

    DISKPART>

    Was this answer helpful?

    0 comments
  2. Anonymous
    2024-07-10T17:44:50+00:00

    Suggest to temporarily convert Disk 1 partition 3 to basic and extend it in disk management...

    Was this answer helpful?

    0 comments
  3. Anonymous
    2024-07-10T17:23:47+00:00

    Hi Ramesh,

    OK, we are Windows 11, YEAH...Thank you so much for your assistance. It was grate.

    Please see below outputs and let me know if we have anythiing else to look into or to do, such as the 101MB unallocated part.

    Regards,

    C:\Windows\System32>diskpart

    Microsoft DiskPart version 10.0.22621.1

    Copyright (C) Microsoft Corporation.

    On computer: BADASSPC

    DISKPART> list disk

    Disk ### Status Size Free Dyn Gpt

    Disk 0 Online 931 GB 0 B

    Disk 1 Online 1863 GB 101 MB *

    Disk 2 Online 1863 GB 931 GB

    Disk 3 No Media 0 B 0 B

    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> list vol

    Volume ### Ltr Label Fs Type Size Status Info

    Volume 0 E DVD-ROM 0 B No Media

    Volume 1 G ESD-ISO UDF DVD-ROM 5400 MB Healthy

    Volume 2 D NTFS Partition 931 GB Healthy

    Volume 3 C NTFS Partition 1861 GB Healthy Boot

    Volume 4 FAT32 Partition 500 MB Healthy System

    Volume 5 NTFS Partition 953 MB Healthy Hidden

    Volume 6 S E:\ NTFS Partition 931 GB Healthy

    Volume 7 I Removable 0 B No Media

    DISKPART>

    Givi

    Was this answer helpful?

    0 comments
  4. Ramesh 181.8K Reputation points Volunteer Moderator
    2024-07-10T15:17:11+00:00

    Please delete H:\ and merge the free space first. This is because the setup can resize the recovery partition (if required) only if it's adjacent to the OS partition. If the setup doesn't automatically configure WinRE, we can do it manually.

    Was this answer helpful?

    0 comments