Trouble Making Image Backup with Acronia True Image 2016 -- apparent misread of space

Anonymous
2020-06-18T23:54:58+00:00

I have been trying for days now to make a backup image of my internal Windows 10 hard drive, fully updated to current Windows 10 level May 2020. I have been using Acronis True Image 2016, as I always do. I have been backing up to an external, USB2 connected hard drive with 160 GB of free space on it (a 320 GB hard drive), the same drive I normally backup to. This is a Gateway laptop, NE56R from 2012, which shipped with Windows 8.

I have been trying to backup all partitions, including the C, and recovery partitions (including the Push Button one, which is about 15 GB) and whatever others are there. In total, they are about 109 GB. So I ought to have plenty enough free space.

I have checked all partitions to back up with True Image. It runs the whole backup, takes a good five hours. At the end, it throws up amessage saying ther eis not enough space for the image.

I have never had this problem before. The machine is booted from the True Image disk, so that should rule out some issue wiht my Widows 10 OS. I am doing a full disk backup, and I am even using Maximum Compression, which is what I always use, so I should need something lessthatn 109 GB of free space. and Ihave 160 GB of free space on the external drive.

I have a backup of Win 10 I made in April, shortly before the new OS level cam out on the drive -- I always keep two, just because. I deleted the older of the two on there, so now have only the one. I certainly don't want to delete the one on there, and still have this problem but no backup at all. But Ihave more free space than shudbe needed.

The external drive has been used only for backups since I started using it brand new, and I make a backup once or twice a year -- and I have been using it no more than four years. So, the external drive has very little, hardly any actual use on it, it is not far from brand new.

I read something this morning about a real problem found in the new Win 10 update, something to do with Storage Space, that is some sort of function in the OS now. I don't know what that is, or what it does. But the story said if your drive is not showing as RAW, then it should be OK, not affected. I checked Disk Management, and none of my volumes nor the external drive are marked as RAW. So, that should mean that issue is not the case here.

I have done enough backups in the past four years using the Acronis True Image 2016 software. It has always worked fine, and actually with less free space (I had another item on the drive too, but have deleted it. I also have deleterd about 32 GB of stuff from my C drive in an attempt to make this backup fit, but to no avail -- that is, my last two backups were actually larger than this one, and they fit fine.)

So, why do I keep getting the message about not enough space? I should have way more than enough.

Windows for home | Windows 10 | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

270 answers

Sort by: Oldest
Most helpful Newest Oldest
  1. Anonymous
    2020-07-30T03:07:55+00:00

    GOOD NEWS! I got rid of the R on Part 5. All I had to do was run the letter removal command once more, that did it. I didn't even have to reboot! And, Part 5 no longer shows in This Computer.

    So, that is all done.

    Now we just want to move the files on Parr 6 to somewhere. Then I can delete the partition, create a new partition, and then move the files back, and we should be done. Where to move those files, and how?

    Was this answer helpful?

    0 comments
  2. Anonymous
    2020-07-30T03:27:44+00:00

    I'm going to need your help in running:

    DIR  X:\  /a  /s" & "BCDEdit  /Enum  All

    I assigned letter X to part 6. Then exited DiskPart.

    Then I put in that code, executed. It failed, said something about bad parameter. I then accidentally closed it, before copying to show yo. But the code did no work

    I then opened Command Prompt again, and put in the code to take X off of Part 6.

    I can do the letter commands, what do I need to do to run that code in between assigning the letter and then taking it off?

    And actually, I don't think we need to move and save the Recovery folder, its now on part 5 and seems to be fine. I think I was saying that when I was talking of one big code to do both part 5 and part 6, did not want to lose the Recovery folder until we knew it was fine on part 5. So, we now simply need to move the win 8 image and then move it back after creating the new partition.

    Was this answer helpful?

    0 comments
  3. Anonymous
    2020-07-30T04:49:19+00:00

    I'm glad you got rid of that letter so easily. Yeah, that probably is all I did.

    (1) "a double check another way"

    At an Administrator Command Prompt, enter "BCDEdit  /Enum  All". It will show that the recovery environment is Partition 5. Also, I want to see what it says about Partition 6.

    (2) "well, how do I make Command Prompt show it?"

    Just get to the Command Prompt in the recovery environment & look up. The version of the Command Prompt is adequate to say what version WinRE.wim is. I'm confident it will say: 10.0.19041.0. And I expect you will get there on the 1st try as you've done plenty of reboots by now.

    Shift+Restart should get there. I've seen some say you must continue to hold the Shift key until you get there. But I've always been able to release it immediately after clicking Restart. Have you tried the other Shift key?

    (3) "Gateway no longer exists"

    NE56R produces nothing, but try your serial number or SNID here...

    https://www.gateway.com/gw/en/US/content/drivers-downloads

    Gateway -- Drivers & Downloads

    If it comes up with the Gateway apps you fear to lose, it's all the more reason to just delete Partition 6. But the ones you are using are all in your Win 10 system images & as up-to-date as they'll ever be.

    (4) "We are merely moving it and moving it back."

    Partition 6 will be problematic to delete. Unlike with Partition 5, there is no way with ReagentC to reestablish its "Recovery Image Location" status, if it is lost when we delete the partition. That's why I want to see a BCDEdit. Maybe backing that up & reinstating it will suffice.

    And let me see what is in Partition 6...

    DiskPart

    Select  Disk  0

    Select  Part  6

    Assign  Letter=X

    Exit

    DIR  X:\  /a  /s                <<< Shows the full contents of Partition 6

    BCDEdit  /Enum  All      <<< You could do it here

    DiskPart

    Select  Disk  0

    Select  Part  6

    Remove  Letter=X

    Exit

    I expect it won't be a massive listing as most of it is that bloated Install.wim. If you can't find another way, we'll use XCOPY to make a copy of the files, maybe even to just a folder on C:partition. But I want to be somewhat confident I can restore Partition 6's status before I delete it. So let's see that BCDEdit.

    Edit: I didn't see your last post before posting this. But this answers it. Those are separate commands & must be entered separately. And, if X:\ is still there, just go straight to the DIR.

    Was this answer helpful?

    0 comments
  4. Anonymous
    2020-07-30T15:57:33+00:00

    From cmd promt in Advanced Startup:

    Windows [Version 10.0.19041.1]

    From cmd prompt (admin) from the desktop. This is all the reading from running "BCDEdit  /Enum  All. I see part 5 only in the last item, but referred to not as part 5, rather as R! So, I went back to This Computer, and again, that partition is visible and accessible, it is labeled as R again! Why? This is now a problem we have to fix permanently

    Will send readout of part 6 next.:

    Microsoft Windows [Version 10.0.19041.388]

    (c) 2020 Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>BCDEdit  /Enum  All

    Firmware Boot Manager

    identifier              {fwbootmgr}

    displayorder            {bootmgr}

    timeout                 2

    Windows Boot Manager

    identifier              {bootmgr}

    device                  partition=\Device\HarddiskVolume3

    path                    \EFI\Microsoft\Boot\bootmgfw.efi

    description             Windows Boot Manager

    locale                  en-US

    inherit                 {globalsettings}

    default                 {current}

    resumeobject            {2d25babd-c701-11ea-bc80-f9e613436a82}

    displayorder            {current}

    toolsdisplayorder       {memdiag}

    timeout                 30

    Firmware Application (101fffff)

    identifier              {6333995d-208d-11e7-86b3-806e6f6e6963}

    description             MATSHITADVD-RAM UJ8C0

    Firmware Application (101fffff)

    identifier              {6fd14a79-c6c7-11ea-896a-806e6f6e6963}

    description             ST750LM022 HN-M750MBB

    Firmware Application (101fffff)

    identifier              {79a37f86-c6c0-11ea-8968-806e6f6e6963}

    description             WDC WD3200AAJB-00TYA0

    Firmware Application (101fffff)

    identifier              {8c530f8d-d8ac-11e5-833c-806e6f6e6963}

    description             WDC WD3200AAJB-00TYA0

    Firmware Application (101fffff)

    identifier              {8f472f02-059e-11ea-88fe-806e6f6e6963}

    description             WDC WD3200AAJB-00TYA0

    Firmware Application (101fffff)

    identifier              {98e580f8-cd40-11ea-898d-806e6f6e6963}

    description             BRCM MBA Slot 0200 v15.0.11

    Firmware Application (101fffff)

    identifier              {db84bcc4-69a1-11e6-84ca-806e6f6e6963}

    description             MATSHITADVD-RAM UJ8C0

    Windows Boot Loader

    identifier              {06a7379d-d1bb-11ea-8997-b888e3b1b2f5}

    device                  ramdisk=[R:]\Recovery\WindowsRE\Winre.wim,{06a7379e-d1bb-11ea-8997-b888e3b1b2f5}

    path                    \windows\system32\winload.efi

    description             Windows Recovery Environment

    locale                  en-US

    inherit                 {bootloadersettings}

    displaymessage          Recovery

    osdevice                ramdisk=[R:]\Recovery\WindowsRE\Winre.wim,{06a7379e-d1bb-11ea-8997-b888e3b1b2f5}

    systemroot              \windows

    nx                      OptIn

    bootmenupolicy          Standard

    winpe                   Yes

    Windows Boot Loader

    identifier              {current}

    device                  partition=C:

    path                    \WINDOWS\system32\winload.efi

    description             Windows 10

    locale                  en-US

    inherit                 {bootloadersettings}

    recoverysequence        {06a7379d-d1bb-11ea-8997-b888e3b1b2f5}

    displaymessageoverride  CommandPrompt

    recoveryenabled         Yes

    isolatedcontext         Yes

    allowedinmemorysettings 0x15000075

    osdevice                partition=C:

    systemroot              \WINDOWS

    resumeobject            {2d25babd-c701-11ea-bc80-f9e613436a82}

    nx                      OptIn

    bootmenupolicy          Standard

    Windows Boot Loader

    identifier              {4677ba16-45a9-4007-9e32-a87e737c0b41}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Windows Boot Loader

    identifier              {49275add-50fb-4501-8b3b-7df483700c94}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Windows Boot Loader

    identifier              {5661a75d-fc4d-4f90-8f77-af1385f5c102}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Windows Boot Loader

    identifier              {591efade-37b3-42f3-b325-d3380c9352e5}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Windows Boot Loader

    identifier              {8a5e4268-a211-447b-9877-f752a8ba97a6}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Windows Boot Loader

    identifier              {8c19644b-24f2-4ca4-9d6b-3635eaa6a08d}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Windows Boot Loader

    identifier              {95696df0-4c33-11e2-a5a4-b888e3b1b2f5}

    device                  ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim,{95696df1-4c33-11e2-a5a4-b888e3b1b2f5}

    path                    \windows\system32\winload.efi

    description             Windows Recovery Environment

    locale                  en-US

    inherit                 {bootloadersettings}

    displaymessage          Recovery

    osdevice                ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim,{95696df1-4c33-11e2-a5a4-b888e3b1b2f5}

    systemroot              \windows

    nx                      OptIn

    bootmenupolicy          Standard

    winpe                   Yes

    Windows Boot Loader

    identifier              {b2d487de-ac52-4262-9678-16b4b484a9d0}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Windows Boot Loader

    identifier              {bb8b618a-d59e-4827-98e2-b5975416fd44}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Windows Boot Loader

    identifier              {fb49f4c6-d650-45e2-9506-8e7240a61516}

    device                  unknown

    path                    \Windows\system32\winload.efi

    description             Windows

    osdevice                unknown

    systemroot              \Windows

    nx                      OptIn

    Resume from Hibernate

    identifier              {2d25babd-c701-11ea-bc80-f9e613436a82}

    device                  partition=C:

    path                    \WINDOWS\system32\winresume.efi

    description             Windows Resume Application

    locale                  en-US

    inherit                 {resumeloadersettings}

    recoverysequence        {06a7379d-d1bb-11ea-8997-b888e3b1b2f5}

    recoveryenabled         Yes

    isolatedcontext         Yes

    allowedinmemorysettings 0x15000075

    filedevice              partition=C:

    filepath                \hiberfil.sys

    bootmenupolicy          Standard

    debugoptionenabled      No

    Windows Memory Tester

    identifier              {memdiag}

    device                  partition=\Device\HarddiskVolume3

    path                    \EFI\Microsoft\Boot\memtest.efi

    description             Windows Memory Diagnostic

    locale                  en-US

    inherit                 {globalsettings}

    badmemoryaccess         Yes

    EMS Settings

    identifier              {emssettings}

    bootems                 No

    Debugger Settings

    identifier              {dbgsettings}

    debugtype               Serial

    debugport               1

    baudrate                115200

    RAM Defects

    identifier              {badmemory}

    Global Settings

    identifier              {globalsettings}

    inherit                 {dbgsettings}

                            {emssettings}

                            {badmemory}

    Boot Loader Settings

    identifier              {bootloadersettings}

    inherit                 {globalsettings}

                            {hypervisorsettings}

    Hypervisor Settings

    identifier              {hypervisorsettings}

    hypervisordebugtype     Serial

    hypervisordebugport     1

    hypervisorbaudrate      115200

    Resume Loader Settings

    identifier              {resumeloadersettings}

    inherit                 {globalsettings}

    Device options

    identifier              {06a7379e-d1bb-11ea-8997-b888e3b1b2f5}

    description             Windows Recovery

    ramdisksdidevice        partition=R:

    ramdisksdipath          \Recovery\WindowsRE\boot.sdi

    C:\WINDOWS\system32>

    Was this answer helpful?

    0 comments
  5. Anonymous
    2020-07-30T16:05:30+00:00

    And this is the readout from running DIR  X:\  /a  /s. Sorry, I accidentally ran it twice. And note, I also took the R off of part 5 AGAIN at the end.

    07/31/2012  11:39 PM               620 LPCD.DAT

    08/15/2012  08:00 PM                67 NAPP.DAT

    12/22/2012  05:32 AM            30,823 Napp7.log

    09/03/2012  12:53 AM               384 RCD.DAT

    08/08/2014  03:11 AM               224 RebuildEnd_CopyFile.cmd

    08/08/2014  03:11 AM             6,779 ReBuildSSD.log

    07/29/2020  09:48 AM    <DIR>          Recovery

    02/02/2016  04:32 PM    <DIR>          RecoveryImage

    03/02/2016  08:06 AM    <DIR>          RECYCLER

    12/22/2012  05:32 AM                 0 Restore.dat

    03/19/2013  07:13 AM    <DIR>          RyTools

    03/02/2016  08:01 AM    <DIR>          System Volume Information

    10/30/2012  01:38 AM             1,236 SystemCD.dat

    10/02/2012  07:00 AM                82 SYSTEMCD_VERSION.DAT

                  11 File(s)         41,057 bytes

     Directory of X:\Recovery

    07/29/2020  09:48 AM    <DIR>          .

    07/29/2020  09:48 AM    <DIR>          ..

    07/29/2020  09:25 AM    <DIR>          Logs

    07/29/2020  09:48 AM    <DIR>          WindowsRE

                   0 File(s)              0 bytes

     Directory of X:\Recovery\Logs

    07/29/2020  09:25 AM    <DIR>          .

    07/29/2020  09:25 AM    <DIR>          ..

    07/19/2020  12:37 PM             1,379 Reload.xml

                   1 File(s)          1,379 bytes

     Directory of X:\Recovery\WindowsRE

    07/29/2020  09:48 AM    <DIR>          .

    07/29/2020  09:48 AM    <DIR>          ..

    12/07/2019  02:08 AM         3,170,304 boot.sdi

    07/29/2020  09:46 AM             1,164 ReAgent.xml

    07/15/2020  05:33 PM       555,507,721 Winre.wim

                   3 File(s)    558,679,189 bytes

     Directory of X:\RecoveryImage

    02/02/2016  04:32 PM    <DIR>          .

    02/02/2016  04:32 PM    <DIR>          ..

    02/02/2016  04:32 PM               330 DONOTREPLACE.txt

    12/22/2012  05:31 AM    13,077,714,302 install.wim

    12/22/2012  05:32 AM    <DIR>          OEM

    12/22/2012  05:32 AM               618 ReCreatePartition.txt

    12/22/2012  05:32 AM             1,083 ResetConfig.xml

    04/11/2012  01:01 AM               644 ResetConfig_SAMPLE.xml

                   5 File(s) 13,077,716,977 bytes

     Directory of X:\RecoveryImage\OEM

    12/22/2012  05:32 AM    <DIR>          .

    12/22/2012  05:32 AM    <DIR>          ..

    09/06/2012  07:17 PM               828 BasicReset_AfterImageApply.cmd

    04/11/2012  01:00 AM               462 BasicReset_BeforeImageApply.cmd

    09/06/2012  07:17 PM             1,726 EnvVar.cmd

    04/11/2012  01:00 AM               462 FactoryReset_AfterDiskFormat.cmd

    09/04/2012  06:05 PM             1,284 FactoryReset_AfterImageApply.cmd

    12/22/2012  05:32 AM    <DIR>          NAPP

    12/22/2012  05:32 AM    <DIR>          OBR

    09/18/2012  04:26 AM           410,768 ReBuildSSD.exe

                   6 File(s)        415,530 bytes

     Directory of X:\RecoveryImage\OEM\NAPP

    12/22/2012  05:32 AM    <DIR>          .

    12/22/2012  05:32 AM    <DIR>          ..

    08/22/2012  05:12 AM               563 Flag.log

    12/22/2012  04:31 AM               166 ImageInfo.dat

    07/31/2012  11:39 PM               620 LPCD.DAT

    08/15/2012  08:00 PM                67 NAPP.DAT

    12/22/2012  05:32 AM            30,106 Napp7.log

    12/22/2012  05:32 AM                 3 PBR.dat

    09/03/2012  12:53 AM               384 RCD.DAT

    12/22/2012  05:21 AM                 0 Restore.dat

    10/30/2012  01:38 AM             1,236 SystemCD.dat

    10/02/2012  07:00 AM                82 SYSTEMCD_VERSION.DAT

                  10 File(s)         33,227 bytes

     Directory of X:\RecoveryImage\OEM\OBR

    12/22/2012  05:32 AM    <DIR>          .

    12/22/2012  05:32 AM    <DIR>          ..

    08/08/2014  03:11 AM               205 CopyEFI_byOEM.cmd

    12/22/2012  05:32 AM    <DIR>          Log

    09/19/2012  05:19 AM             1,558 modifybcdtoPBR.cmd

    09/19/2012  05:18 AM             1,826 modifybcdtoWinRE.cmd

    09/19/2012  06:11 AM           344,720 OBRSetTool_amd64.exe

    09/19/2012  06:11 AM           223,888 OBRSetTool_X86.exe

                   5 File(s)        572,197 bytes

     Directory of X:\RecoveryImage\OEM\OBR\Log

    12/22/2012  05:32 AM    <DIR>          .

    12/22/2012  05:32 AM    <DIR>          ..

    08/08/2014  03:11 AM           390,932 modifybcdLog.log

    08/08/2014  03:11 AM           139,025 OBRSetTool.log

                   2 File(s)        529,957 bytes

     Directory of X:\RECYCLER

    03/02/2016  08:06 AM    <DIR>          .

    03/02/2016  08:06 AM    <DIR>          ..

    03/02/2016  08:06 AM    <DIR>          S-1-5-18

                   0 File(s)              0 bytes

     Directory of X:\RECYCLER\S-1-5-18

    03/02/2016  08:06 AM    <DIR>          .

    03/02/2016  08:06 AM    <DIR>          ..

    03/02/2016  08:06 AM                65 desktop.inf

    03/02/2016  08:06 AM                20 INFO2

                   2 File(s)             85 bytes

     Directory of X:\RyTools

    03/19/2013  07:13 AM    <DIR>          .

    03/19/2013  07:13 AM    <DIR>          ..

    12/22/2012  05:32 AM             3,025 DumpDiskPart_NAPP3P_END.log

    08/08/2014  03:11 AM               224 RebuildEnd_CopyFile.cmd

    08/08/2014  03:11 AM             2,231 ReBuildSSD.log

                   3 File(s)          5,480 bytes

         Total Files Listed:

                  48 File(s) 13,637,995,078 bytes

                  34 Dir(s)   3,137,146,880 bytes free

    C:\WINDOWS\system32>DIR  X:\  /a  /s

     Volume in drive X is Push Button Reset

     Volume Serial Number is D49F-5C80

     Directory of X:\

    12/22/2012  04:36 AM               676 Flag.log

    12/22/2012  04:31 AM               166 ImageInfo.dat

    07/31/2012  11:39 PM               620 LPCD.DAT

    08/15/2012  08:00 PM                67 NAPP.DAT

    12/22/2012  05:32 AM            30,823 Napp7.log

    09/03/2012  12:53 AM               384 RCD.DAT

    08/08/2014  03:11 AM               224 RebuildEnd_CopyFile.cmd

    08/08/2014  03:11 AM             6,779 ReBuildSSD.log

    07/29/2020  09:48 AM    <DIR>          Recovery

    02/02/2016  04:32 PM    <DIR>          RecoveryImage

    03/02/2016  08:06 AM    <DIR>          RECYCLER

    12/22/2012  05:32 AM                 0 Restore.dat

    03/19/2013  07:13 AM    <DIR>          RyTools

    03/02/2016  08:01 AM    <DIR>          System Volume Information

    10/30/2012  01:38 AM             1,236 SystemCD.dat

    10/02/2012  07:00 AM                82 SYSTEMCD_VERSION.DAT

                  11 File(s)         41,057 bytes

     Directory of X:\Recovery

    07/29/2020  09:48 AM    <DIR>          .

    07/29/2020  09:48 AM    <DIR>          ..

    07/29/2020  09:25 AM    <DIR>          Logs

    07/29/2020  09:48 AM    <DIR>          WindowsRE

                   0 File(s)              0 bytes

     Directory of X:\Recovery\Logs

    07/29/2020  09:25 AM    <DIR>          .

    07/29/2020  09:25 AM    <DIR>          ..

    07/19/2020  12:37 PM             1,379 Reload.xml

                   1 File(s)          1,379 bytes

     Directory of X:\Recovery\WindowsRE

    07/29/2020  09:48 AM    <DIR>          .

    07/29/2020  09:48 AM    <DIR>          ..

    12/07/2019  02:08 AM         3,170,304 boot.sdi

    07/29/2020  09:46 AM             1,164 ReAgent.xml

    07/15/2020  05:33 PM       555,507,721 Winre.wim

                   3 File(s)    558,679,189 bytes

     Directory of X:\RecoveryImage

    02/02/2016  04:32 PM    <DIR>          .

    02/02/2016  04:32 PM    <DIR>          ..

    02/02/2016  04:32 PM               330 DONOTREPLACE.txt

    12/22/2012  05:31 AM    13,077,714,302 install.wim

    12/22/2012  05:32 AM    <DIR>          OEM

    12/22/2012  05:32 AM               618 ReCreatePartition.txt

    12/22/2012  05:32 AM             1,083 ResetConfig.xml

    04/11/2012  01:01 AM               644 ResetConfig_SAMPLE.xml

                   5 File(s) 13,077,716,977 bytes

     Directory of X:\RecoveryImage\OEM

    12/22/2012  05:32 AM    <DIR>          .

    12/22/2012  05:32 AM    <DIR>          ..

    09/06/2012  07:17 PM               828 BasicReset_AfterImageApply.cmd

    04/11/2012  01:00 AM               462 BasicReset_BeforeImageApply.cmd

    09/06/2012  07:17 PM             1,726 EnvVar.cmd

    04/11/2012  01:00 AM               462 FactoryReset_AfterDiskFormat.cmd

    09/04/2012  06:05 PM             1,284 FactoryReset_AfterImageApply.cmd

    12/22/2012  05:32 AM    <DIR>          NAPP

    12/22/2012  05:32 AM    <DIR>          OBR

    09/18/2012  04:26 AM           410,768 ReBuildSSD.exe

                   6 File(s)        415,530 bytes

     Directory of X:\RecoveryImage\OEM\NAPP

    12/22/2012  05:32 AM    <DIR>          .

    12/22/2012  05:32 AM    <DIR>          ..

    08/22/2012  05:12 AM               563 Flag.log

    12/22/2012  04:31 AM               166 ImageInfo.dat

    07/31/2012  11:39 PM               620 LPCD.DAT

    08/15/2012  08:00 PM                67 NAPP.DAT

    12/22/2012  05:32 AM            30,106 Napp7.log

    12/22/2012  05:32 AM                 3 PBR.dat

    09/03/2012  12:53 AM               384 RCD.DAT

    12/22/2012  05:21 AM                 0 Restore.dat

    10/30/2012  01:38 AM             1,236 SystemCD.dat

    10/02/2012  07:00 AM                82 SYSTEMCD_VERSION.DAT

                  10 File(s)         33,227 bytes

     Directory of X:\RecoveryImage\OEM\OBR

    12/22/2012  05:32 AM    <DIR>          .

    12/22/2012  05:32 AM    <DIR>          ..

    08/08/2014  03:11 AM               205 CopyEFI_byOEM.cmd

    12/22/2012  05:32 AM    <DIR>          Log

    09/19/2012  05:19 AM             1,558 modifybcdtoPBR.cmd

    09/19/2012  05:18 AM             1,826 modifybcdtoWinRE.cmd

    09/19/2012  06:11 AM           344,720 OBRSetTool_amd64.exe

    09/19/2012  06:11 AM           223,888 OBRSetTool_X86.exe

                   5 File(s)        572,197 bytes

     Directory of X:\RecoveryImage\OEM\OBR\Log

    12/22/2012  05:32 AM    <DIR>          .

    12/22/2012  05:32 AM    <DIR>          ..

    08/08/2014  03:11 AM           390,932 modifybcdLog.log

    08/08/2014  03:11 AM           139,025 OBRSetTool.log

                   2 File(s)        529,957 bytes

     Directory of X:\RECYCLER

    03/02/2016  08:06 AM    <DIR>          .

    03/02/2016  08:06 AM    <DIR>          ..

    03/02/2016  08:06 AM    <DIR>          S-1-5-18

                   0 File(s)              0 bytes

     Directory of X:\RECYCLER\S-1-5-18

    03/02/2016  08:06 AM    <DIR>          .

    03/02/2016  08:06 AM    <DIR>          ..

    03/02/2016  08:06 AM                65 desktop.inf

    03/02/2016  08:06 AM                20 INFO2

                   2 File(s)             85 bytes

     Directory of X:\RyTools

    03/19/2013  07:13 AM    <DIR>          .

    03/19/2013  07:13 AM    <DIR>          ..

    12/22/2012  05:32 AM             3,025 DumpDiskPart_NAPP3P_END.log

    08/08/2014  03:11 AM               224 RebuildEnd_CopyFile.cmd

    08/08/2014  03:11 AM             2,231 ReBuildSSD.log

                   3 File(s)          5,480 bytes

         Total Files Listed:

                  48 File(s) 13,637,995,078 bytes

                  34 Dir(s)   3,137,146,880 bytes free

    C:\WINDOWS\system32>DiskPart

    Microsoft DiskPart version 10.0.19041.1

    Copyright (C) Microsoft Corporation.

    On computer: COMPUTER

    DISKPART> Select  Disk  0

    Disk 0 is now the selected disk.

    DISKPART> Select  Part  6

    Partition 6 is now the selected partition.

    DISKPART> Remove  Letter=X

    DiskPart successfully removed the drive letter or mount point.

    DISKPART> Select  Part  5

    Partition 5 is now the selected partition.

    DISKPART> Remove  Letter=R

    DiskPart successfully removed the drive letter or mount point.

    DISKPART> Exit

    Leaving DiskPart...

    C:\WINDOWS\system32>

    Was this answer helpful?

    0 comments