Update KB5034441 fails to install

Thanks for the info. I had no idea because usually I get updates and there is not much of a problem. I am running 500/500Mb/s internet and I had trouble when that update appeared to not update going from one website to another or back to update/security section. I read about the update and there are a half a dozen problems that could arise. One being run the troubleshooter and it pointed out for me to re-start. Going there 5 times a day now in hope the 4441 update would either finally disappear or fixed. Then the sitting for 30+ minutes after restart and read that to just wait instead of powering off. Until last year I have never done a scf scannow after some blue screen problems and also running a program to fix it. One was with RAM problems. One of the programs took over an hour. So after the blue screen problems which seemed to have been repaired we get the 4441 that won't update along with all the fixes some have touted that do not work (YT).

About the KB 5034203, which goes to 100%... And then seems to start again, and stops at 20%. It has always been like that with this update just let it run... And it will continue updating after some minutes, and require restart. I have never had problem with this update.

I always let the other updates get installed before hitting the Restart now-button.

As if Microsoft Windows 10 users need more problems on updates. Today there were two other updates. Kb5034582 update which stated to re-start your PC. I did and it came up okay. Then kb5034203 was ready to update to PC. It started slow and stopped then went to 100% but would not complete. Reading about it's problems from MS. One was to run the troubleshooter for updates. Did that and it stated to restart PC again. Closed everything and pwr re-start. I had the Do not shut down PC your windows updates. This went on for 30 minutes and I read the number one thing to do is wait. I did and finally re-booted. So now we have another update after the 4441 one that has failed and remains so. I can only say when you have a update not updating but trying to it slows down your processes. It needs to be fixed and other updates need to be tested for problems. MS states there is a fix but I can tell you for sure that 90% have no idea nor want to do this step that could wreck your PC even more. I can do the sfc scannow and others where you only have to let it run check for problems and fixes. Not even doing this partition that many have stated does not work. It has been 2 weeks and yet no fixes for a update that won't update. Then to have another that won't load until it is troubleshot and fixed. Users just want to use their PC without problems not caused by PC ,that uploaders do. First is run troubleshooters which can not even see this problem let alone tell you how to fix it. Then SFC and others that DO NOT WORK.

I can tell you guys right now what is going wrong, and it has annoyed me for the longest time. Because the drive our operating system is on is not disk 0, this update keeps failing. This nonsensical system of letting the motherboard choose the disk number, and it always choosing SSDs plugged into the SATA ports as the first numbers is so annoying, especially when most people put their operating systems on the faster NVME drives, but these drive slots never get designated as disk0 on the system.

So this particular update keeps trying to look for a Windows Recovery Environment on disk 0, and keeps failing to find one if people have Windows installed on their NVME drives which never get labelled as disk 0, so the update just simply fails every time.

If you tell the update to stop trying to look for Windows Recovery Environment ONLY on disk 0, maybe the update will finally work.