Cannot get bootable usb windows 10 2004 to work

Anonymous
2020-09-13T20:35:32+00:00

Have rest the computer yet again for the umpteenth time

Have had one advisor on here saying my pc might not be compatable but it is only 1 year old

Lenovo Ideacentre 310s-08asr amd a9-9245 radeon r5 compute cores 2c+3G

8Gb Memory

875Gb free on hard drive

Razer Chroma keyboard

Windows Defender used no 3rd party

Have installed windows 10 to a bootable usb device 16gb

bios set so that usb is primary boot device over hard drive

Reset computer

screen momentarily shows windows logo then there is a flicker and the normal lenovo boot screen is displayed

then computer tried the usb again and the same flicker and back to the lenovo screen again 

computer keeps this loop going until the usb is removed and computer then boot normally.

Previously tried windows update to no avail constantly getting error 0xc1900101 but using windows media creation tool I get 

error 0xc1900101-0x20017

Have run lenovo vantage and it reports system up to date

Have run lenovo system update and it updated the AMD onboard graphics driver, that reported no other updates are required.

Ran the AMD drivers and supported and that updated drivers and AMD software

System has Office, Canon drivers and software for TS8351 installed, Google Earth, Firefox, Chrome, Thunderbird and IMVU installed. These proved not to be a problem as my 5 year old HP computer updated to 2004 without any problems.

Tried again and error 0xc1900101 occurred yet again.

The computer has been taken back to 1903 its original format and even with nothing added resulted in error 0xc1900101 and 0xc1900101-20017 using media creation tool.

Update troubleshooter this time reports an issue has been detected. When you look at the details it says "check for windows update issues"

Then says "resolve windows update issues - completed

Then WaaSMedicService

Issues remediated by: EnableUUPScanPlugin.

Then detection details

IsPostback_RCUpdates : IsPostback: False

WaaSMedicService: Issue found by: EnableUUPScanPlugin

IsPostback_RC_PendingUpdates: IsPostback: True

Service Status

Problem with BITS service: The requested service has been started. More help is available by typing NET HELPMSG 2182

Windows for home | Windows 10 | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

44 answers

Sort by: Oldest
Most helpful Newest Oldest
  1. Anonymous
    2020-09-17T20:16:08+00:00

    For a laugh I tried windows update and low an behold I got the expected fail to install and error 0xc1900101. Update troubleshooter still gave the same old report. Lenvovo System update still says no new packaged available. Lenovo Vantage says your system is up to date. There is no option to load BIOS updates. Lenovo support site is worse than useless having tried it.

    The computer configures the update then tried to restart, which is when the update ultimately fails and tries to load windows and reboot several times for 8-10 minutes before your a put back to the lock screen.

    If I do a clean install and it fails, how would I get the computer back to normal as I still have the recovery drive and intend to make a system image backup.

    Was this answer helpful?

    0 comments
  2. Igor Leyko 112.4K Reputation points Independent Advisor
    2020-09-17T20:42:35+00:00

    I recommend to create full backup (it has windows 7 in name).

    Was this answer helpful?

    0 comments
  3. Anonymous
    2020-09-17T20:51:24+00:00

    That be the system image and use that together with system restore that can be accessed via F11 on restart?

    Out of curiosity, if the USB was formatted to NTFS would it make a difference?

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments
  4. Igor Leyko 112.4K Reputation points Independent Advisor
    2020-09-17T20:55:56+00:00

    You'll need to boot from recovery disk or installation media to use system image.

    Was this answer helpful?

    0 comments
  5. Anonymous
    2020-09-18T00:20:37+00:00

    System Restore is for restore points. Those are cleared by a clean install, even just an upgrade-install will clear them. As Igor Leyko said, make a Windows system image backup. Then, you'll see how to restore it in the links below.

    It makes a backup of all the Windows partitions required to boot & run Windows:  EFI, MSR, Windows (C:), & Recovery. If you've got additional partition(s), they will also be offered for inclusion. A 2 TB external HDD is large enough to never fill with images. An 8 GB flash drive should be large enough to hold a Recovery drive (used to restore an image).

    I make one after each new OS Build comes in & runs well, & I keep the last three...

    I rename the computername folder which is inside the WindowsImageBackup folder (by adding the OS Build to it) in order to keep them separate & distinct. All three will be offered during the restore process.

    Make it at "START, Settings, Update & Security, Backup, Go to backup & Restore (Win 7), Create a system image". Afterward, make the Repair Disc or (even better) ask Cortana for Recovery Drive to put it on USB. That can be used to do a restore. Then see the following to know how to restore one...

    https://answers.microsoft.com/en-us/windows/forum/windows_10-update/how-to-restore-a-windows-10-system-image-to-an/e20992ca-5641-4f7c-bb09-3895d0732162

    How to restore a Windows 10 system image to an existing or larger storage device

    https://www.winhelp.us/restore-a-system-image-in-windows-7.html

    Restore a System Image Backup in Windows 7, 8, 8.1 and 10

    Note: That is an informative 3rd-party site, but I know nothing (good or bad) about any downloads or links that are there (or anywhere else).

    If your external hard drive (or the internal one I guess) is a Seagate or Maxtor, there will be a free version of Acronis True Image at their site. Seagate calls it DiscWizard. Macrium Reflect, AOMEI Backupper & others also offer free versions of their image makers. These 3rd-party apps are quicker, make more compact images, & are more flexible in use. But the Windows version works in under 15 minutes on my small & uncomplicated system. I must add, DiscWizard's Bootable Media (to restore an image when Windows won't boot) requires a Mouse to operate. Plug one in, & it is instantly recognized.

    Was this answer helpful?

    0 comments