sfc and DISM both fail, windows 10 version 1803

Hi,

On the other thread, it looked like there was some question as to what had fixed the problem - maybe the upgrade to 1909. Here, sfc and dism seem to be working. Hadn't run sfc for a few days; today it got to 44% again with no errors, then

2019-11-24 15:39:00, Error                 CSI    000028ab (F) c000a2a7 [Error,Facility=(system),Code=41639 (0xa2a7)] #36210529# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysReadFile(h = a18 ('\Device\HarddiskVolume5\Windows\WinSxS\amd64_microsoft-windows-n..orkconnectionbroker_31bf3856ad364e35_10.0.17134.1_none_422fdc892e0c33b3\ncbservice.dll'), evt = 0, apcr = NULL, apcc = NULL, iosb = @0x296af7b4f0, data = {l:0 b:}, byteoffset = 0, key = (null))

[gle=0xd000a2a7]

2019-11-24 15:39:00, Error                 CSI    000028ac@2019/11/24:20:39:00.847 (F) onecore\base\wcp\sil\ntsystem.cpp(3533): Error c000a2a7 [Error,Facility=(system),Code=41639 (0xa2a7)] originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysReadFile expression: (null)

[gle=0x80004005]

So is this a problem with the integrity of the installed s/w (consistent results of corruption in compressed file's resource table), not with the diagnostics s/w?

pete vh

Did you check the other thread?

Does your DISM log have a line like Failed to bind the online servicing stack in the listing..?

If you have the same situation as the other thread, it was solved..  You might ask that poster..

Hi,

The fails in the dism logs are generally the same. The ones from 11/22 are above. On 11/19, starts with

2019-11-19 16:44:54, Warning               DISM   DISM Provider Store: PID=7876 TID=9812 Failed to load the provider: C:\Users\pete\AppData\Local\Temp\2772662B-DDA8-4255-89FD-08353866B685\PEProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)

2019-11-20 09:57:47, Warning               DISM   DISM Provider Store: PID=7456 TID=4236 Failed to load the provider: C:$WINDOWS.~BT\Sources\SiloedPackageProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)

2019-11-20 09:57:47, Warning               DISM   DISM Provider Store: PID=7456 TID=4236 Failed to load the provider: C:$WINDOWS.~BT\Sources\FfuProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)

2019-11-20 09:57:47, Warning               DISM   DISM Provider Store: PID=7456 TID=4236 Failed to load the provider: C:$WINDOWS.~BT\Sources\MetaDeployProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)

and so on.

I have no distribution media. Tried using a downloaded iso of 1803 17134.1 as a source for dism, but had same results. It looks like a disconnect between i7 core rev and the Intel graphics driver is going to keep me at 1803.

Do you think there's any chance uninstalling the last few updates, then reinstalling them, and several missing ones, would work, or at least not blow up? Looks like there would be 2 windows & 2 .net framework updates to uninstall. 2 ssu updates can't be uninstalled. About 15 updates to install after.

thanks,

pete

There is a dism log you could check.  If you do that, keep in mind the log is a running listing so you need to check the date and time when it was run.  Usually start from the bottom and go up since you only need the last two or three runs.

Your setupdiag utility did not see a reason for the failure.  It has several scenarios it checks for and did not see one of those.

Do you have the install media for your current install?  If you do, have you tried doing an in-place upgrade by running the setup file from the Windows desktop?  Have you tried running DISM using that install.esd file as the source for those files?

You might look through this thread and see what was done there.

https://answers.microsoft.com/en-us/windows/forum/windows\_10-windows\_install/windows-update-failed-nothing-works-and-im-out-of/6fc7f62d-0143-4e41-8657-5283a794e8f5?messageId=916374b1-c4f5-4fdd-a95d-783baa082235&page=1

Hi,

Not sure you would have been notified of the later posts.

pete