Blue Screen of Death Windows 10

a) run the administrative command prompt command 

https://1drv.ms/u/s!AplfzH9YkqOFiU6IZ8l_yObdHN1U

b) Memory Dump

https://1drv.ms/u/s!AplfzH9YkqOFiU8ZcRvPWEXpvGWl

For each BSOD:

a) run the administrative command prompt command > post a new zip into the thread

b) open file explorer > this PC > C: > seach for C:\windows\memory.dmp > if the file size is < 1.5 GB then zip > post a share link into the thread using one drive, drop box, or google drive

Find an alternative Nvidia driver as per the prior post.

If there are no alternative drivers that see if you can find a friend, neighbor, relative, or local computer store to swap the Nvidia card.

Make two tests:

a) test a new card in the problematic computer

b) test the card from the problematic computer in another computer

1. Uninstalled and reinstalled Nvidia GPU Drivers (2nd time same method)
2. Windows Auto Update have not been enabled by default. 

https://1drv.ms/u/s!AplfzH9YkqOFiUzBw96cAJyp6Sqp

https://1drv.ms/u/s!AplfzH9YkqOFiUuEjT4vDzlRt1if

3. Could not find other version of Driver, used https://www.nvidia.com/Download/Scan.aspx?lang=en-us and downloaded same driver which is the latest one and reinstalled. 

Turn on Verifier and ran all the standard tests.

Verifier Flags: 0x00000fbb

  Standard Flags:

    [X] 0x00000001 Special pool.

    [X] 0x00000002 Force IRQL checking.

    [X] 0x00000008 Pool tracking.

    [X] 0x00000010 I/O verification.

    [X] 0x00000020 Deadlock detection.

    [X] 0x00000080 DMA checking.

    [X] 0x00000100 Security checks.

    [X] 0x00000800 Miscellaneous checks.

    [ ] 0x00020000 DDI compliance checking.

  Additional Flags:

    [ ] 0x00000004 Randomized low resources simulation.

    [X] 0x00000200 Force pending I/O requests.

    [X] 0x00000400 IRP logging.

    [ ] 0x00002000 Invariant MDL checking for stack.

    [ ] 0x00004000 Invariant MDL checking for driver.

    [ ] 0x00008000 Power framework delay fuzzing.

    [ ] 0x00010000 Port/miniport interface checking.

    [ ] 0x00040000 Systematic low resources simulation.

    [ ] 0x00080000 DDI compliance checking (additional).

    [ ] 0x00200000 NDIS/WIFI verification.

    [ ] 0x00800000 Kernel synchronization delay fuzzing.

    [ ] 0x01000000 VM switch verification.

    [ ] 0x02000000 Code integrity checks.

    [X] Indicates flag is enabled.

  Boot Mode:

    Persistent

  Rules:

    All rules are using default settings

  Verified Drivers:

    evbda.sys

    nvraid.sys

    bxvbda.sys

    iastorv.sys

    vstxraid.sys

    3ware.sys

    amdsata.sys

    amdxata.sys

    amdsbs.sys

    arcsas.sys

    itsas35i.sys

    lsi_sas.sys

    lsi_sas2i.sys

    lsi_sas3i.sys

    lsi_sss.sys

    megasas.sys

    megasas2i.sys

    megasas35i.sys

    megasr.sys

    mvumis.sys

    nvstor.sys

    percsas2i.sys

    percsas3i.sys

    sisraid2.sys

    sisraid4.sys

    stexstor.sys

    cht4sx64.sys

    vsmraid.sys

    iastoravc.sys

    adp80xx.sys

    hpsamd.sys

    amdpsp.sys

    amdpcidev.sys

    amdgpio2.sys

    amdgpio3.sys

    nvvhci.sys

    dump_dumpstorport.sys

    dump_stornvme.sys

    dump_dumpfve.sys

BSOD again - Stop Code: Kernel Security Check Failure

CMD LogsMemory Dump

Awaiting kind reply

The latest memory dump: 

Thu Nov 22 12:11:14.629 2018 (UTC - 6:00)

Displayed bugcheck 139.

The misbehaving driver was nvlddmkm.sys

Perform the following steps:

1. uninstall and reinstall the Nvidia GPU drivers as in the prior post.
2. Temporarily turn off Windows updates of non-Microsoft drivers

https://www.tenforums.com/tutorials/48277-enable-disable-driver-updates-windows-update-windows-10-a.html

3. Find a different version of the Nvidia GPU drivers, nvlddmkm.sys

(The version in the latest crash was 25.21.14.1694)

4. Uninstall using DDU, reinstall from the Nvidia website making sure it is performed as a clean install.

(see instructions in the prior post)

When using windows driver verifier the computer may become sluggish.

The boots may become very slow.

Always make a brand new restore point before using the tool.

When using the tool all non-Microsoft drivers are tested simultaneously.

The number and type of tests impacts the performance.

When the tool is restarted customize with the 3 tests in this link:

https://www.tenforums.com/tutorials/5470-enable-disable-driver-verifier-windows-10-a.html

If the tool works properly with these three customized tests then increase the number of simultaneous tests.

If there are performance problems then you can add and subtract tests so that the drivers are exposed to the approximately 19 different tests over multiple runs.

For example if there are 9 simultaneous tests running and adding 3 more causes performance problems then change the number of tests back to 9 by remove some of the tests that had already been used to stress test the drivers.

Eventually all drivers should be exposed to all of the approximate 19 tests.

For replacement drivers, many of the component manufactures have driver detector tools.

Some require the use of a browser that has the capability to use Java (for example Internet explorer)

https://www.amd.com/en/support/kb/faq/gpu-driver-autodetect

https://www.nvidia.com/Download/Scan.aspx?lang=en-us

https://www.intel.com/content/www/us/en/support/detect.html

The best tested drivers are always from the computer or motherboard manufacturer websites.

For any driver not displayed the next best option is to install drivers from the component manufacturer websites ( Intel, AMD, Nvidia, Killer Networks, Realtek, etc.)

Ok, after reinstalling both drivers i tried doing what i did normally and the BSOD came again..

Stop code: KERNEL SECURITY CHECK FAILURE

Cmd & Dxdiag

Memory

Also, how do I run verifier and allow it to boot to windows again?