Cannot cast from Windows 10 to Anyview cast Smart TV

Anonymous
2017-12-31T00:28:14+00:00

I'm attempting to project to a second display onto a Smart TV supporting Anyview Cast (Hisense Smart TV). I've attempted this with two different Windows 10 laptops, both using the Project to second screen > Connect to a wireless display options.

In both cases, it attempts to connect for a while, and then nothing happens. One laptop also states "Couldn't connect" in yellow (with no further diagnostic information).

I believe it is the same issue raised in several other posts:

https://answers.microsoft.com/en-us/windows/forum/windows\_10-hardware/windows-10-cast-to-device-cant-communicate-with/2597b999-b2dd-4983-b01a-48322a19c482

https://answers.microsoft.com/en-us/windows/forum/windows\_10-win\_continuum-winpc/mirrorcast-from-windows-10-devices-to-hisense-k700/d673bff8-a78a-469e-aadb-97a30a6d8344

https://answers.microsoft.com/en-us/surface/forum/surfpro4-surfdrivers/casting-to-hisense-tv/22314888-97ed-4c02-92b5-1fbefb610843

Windows for home | Windows 10 | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2018-12-20T15:51:49+00:00

i was able to do it with the below steps.

On win 10 --> 

"Control Panel -> Network and Internet -> Network and Sharing Center" --> Change advanced sharing settings - Turn on File and Printer sharing 

On Hi -Sense TV - > Home, Input -> Anywhere cast -> It will wait for the device to connect

Back to PC -> Settings - Devices - Add Bluetooth and other devices -> wireless display or Dock

Smart TV would appear there and you should be able to connect.

I use it as my second display and extend my display to the TV when working from home.

Was this answer helpful?

200+ people found this answer helpful.
0 comments
Answer accepted by question author
Anonymous
2018-06-16T05:14:41+00:00

SOLVED !!!!

after much faffing and playing with drivers and doing everything under the sun which didnt work......By flook i got it working. 

Turn hisense on ( not in anyview cast mode !!! ) on laptop Go to the add devices and printers section. Remove the little tv icon/ device if its there and then re-add the device .... BUT !!! AND THIS IS WHAT MADE IT WORK , WHEN YOU RE ADD IT DONT ADD IT BACK AS THE TV ICON !!!!! IT NEEDS TO BE ADDED BACK AS A PC/SVR/MEDIA BOX TYPE ICON!!!!  Which will show in the row below where the tv icons are/were.  

I then went to my movies and said cast, it found my hisense smarttv ( the first movie i chose format didnt work, but the 2nd one i chose, clicked cast and play in the little window that came up and true as nuts it played ) 

hope i am making sense here

Was this answer helpful?

90+ people found this answer helpful.
0 comments

54 additional answers

Sort by: Newest
Most helpful Newest Oldest
  1. Anonymous
    2019-05-09T08:24:37+00:00

    I just purchased a Hisense 50P7 TV with Anyviiew Cast and have been trying to get it to work with my computer through the wireless network.

    my setup is as follows:

    conputer connected by ethernet cable to router

    tv connected by wi-fi to router.

    So i am trying to get it to cast from computer through the router to the tv. 

    Will that be possible?

    or would i need a wi-fi card in my computer to connect directly to the TV?

    Was this answer helpful?

    0 comments
  2. Anonymous
    2019-03-24T15:28:49+00:00

    I could cast from laptop/windows 10 to Anyview Cast before. But not working now. My driver' and window is regularly updated. While trying to connect, i can see the tv on my windows. However, it will either ask for password shown to be entered on the tv while there is no such window on the TV or it won't connect. Same thing happens with Amazon fire TV stick.

    I guess, the windows releases are not tested enough which is required in view of so many devices around.

    Was this answer helpful?

    0 comments
  3. Anonymous
    2019-02-19T03:52:01+00:00

    I was able to do it with the below steps.

    On win 10 --> 

    "Control Panel -> Network and Internet -> Network and Sharing Center" --> Change advanced sharing settings - Turn on File and Printer sharing 

    On Hi -Sense TV - > Home, Input -> AnyView cast -> It will wait for the device to connect

    Back to PC -> Settings - Devices - Add Bluetooth and other devices -> wireless display or Dock

    Smart TV would appear there and you should be able to connect.

    I use it as my second display and extend my display to the TV when working from home.

    NOTE:  ONCE YOU HAVE "ANYVIEW" from your TV "INPUT" on, go to your computer and press "CONNECT" (bottom right hand corner of Windows 10 at the right of your clock on your taskbar)- "Notifications Center" and "SMART TV" should be seen once you click "CONNECT".  Click on "SMART TV" and it can take several seconds maybe longer to connect.  If it doesn't work the 1st time redo these simple steps and try again.  Don't forget to look up at your "ANYVIEW CAST" on your TV and you will see it slowly connect.

    Good Luck

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments