Upgrading ASUS CM6870 to Windows 10 Creators Edition or April 2018 release 1703, 1709, 1804 (RT3090 PCIe wireless card)

Anonymous
2017-04-29T19:14:40+00:00

This was a pain for me, so I hope this helps someone.

I made 15 attempts to update my ASUS CM6870 from the Windows 10 Anniversary Edition to the Creators Edition (Creators Update), I *always* hung hard around 40 or 42% after the first system reboot, with the 'rolling' animation ground to a halt. This almost always points to a hardware problem.

I did everything to find the bad hardware! I disconnected all of the USB, ripped out all of the superfluous drivers, did a clean reboot, did a driver uninstall on my NVIDIA drivers using DDU, and uninstalled every program that had a funky driver like the VMWare standalone converter and my Cisco Anyconnect VPN. Nothing worked.

Each reboot reported "0xc1900101 - 0x30018 the installation failed in the FIRST_BOOT phase with an error during SYSPREP operation"

Digging into the clues from files left behind in C:$WINDOWS.~BT\Sources\Panther, I saw that the last thing before failure was a bunch of SPPNP messages which seems to be the SYSPREP driver loading phase. There were also a bunch of <NUL> characters at the end of the file. Some piece of hardware was refusing to play nice. I had painstakingly removed everything I could without opening the case.

Finally, based on various hints on forums, I cracked open the PC and pulled out my PCIe wireless card. Boom. Fully installed.

The Wireless card was a PCIe x1 in a PCI x16 slot if that matters, and it was the ASUS branded MediaTek Railink technologies RT3090 wireless card.

(PCI\VEN_1814&DEV_3090&SUBSYS_760111AD&REV_00)

Once the Creators Update was installed, I was able to reinstall the card without incident. Go figure.

Edit: This problem probably applies to any system using a P8H61 or P8H77 motherboard. According to this thread, the P8H77-M PRO (CM6870) is affected, as are other ASUS desktops like the ASUS CM6730 with a P8H61‑M PRO with that RT3090 wireless card.

Other commenters report that the ROG CG6480 / TYTAN CG8480 and CM1855 are also affected, presumably also with the errant RT3090 card.

I also observed the problem with an Ascend Ascendtech WN7601R-H1 PCI card in HP desktops. This is also an RT3090 PCIe card.

Commenter Chris Deer reports that he also had the problem with the Acer L4610, L4620, and L480, possible other Acer "L" models.

The Fall Creators Edition and April 2018 update also have this problem, so the installer is not yet fixed to place nice with the RT3090 wireless card.

One commenter noted that moving the card from a PCIx16 slot to a PCIx4 slot also fixed the problem, so it may be an interaction between the card and the northbridge (motherboard chipset) in certain slots.

EDIT: WARNING: Be careful removing and re-inserting the wireless card; make sure the power cord is removed from the power supply. The sound card chip is right at that slot and I damaged it, so now my system no longer recognizes when speakers are attached. Looks like I scratched a trace on the motherboard.  I know it is a hardware problem because booting a Linux Live USB showed the same problem.

Windows for home | Windows 10 | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

228 answers

Sort by: Oldest
  1. Anonymous
    2018-08-22T19:52:11+00:00

    Thank you!!!!!!!  After close to 20 attempts to upgrade to 1803 following EVERY Microsoft recommendation, I happened upon your post. I was having the exact symptoms on an Acer Aspire M3420 with AMD A10-5700. Removed the wireless card, launched setup from the downloaded ISO and SUCCESS!  I put the wifi card back in and it works perfectly! Thanks again!

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2018-08-23T11:03:42+00:00

    Has anyone solved this same issue with an Asus M11AA  by using this method?

    The device Manager shows the LAN card as a Ralink manufacture but no identifying number.

    I migrated from Windows 8.1 to Windows 10 at it's inception, prompted by MS, and progressed to version 1709 when problems started at trying to install 1803.

    Contacting Asus about compatibility I was advised this model did not support Windows 10 only 8.1. Being "non-technical" I am lothe to pursue this course if this information is correct

    Regards

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2018-08-28T12:48:13+00:00

    Thanks a million. I was having the exact same problem since 6 months where my PC tried to update from 1607 to the latest version now.  Althoug I have an ASUS CM6330, but with the same WLAN card.

    Every time it hung up at 83% and after reboot it said oh sorry going back to the last version. This happened about 15-20 times costing me endless hours. Removed the WLAN card and it went through even with crab cleaner and Anti virus.

    First of all MS tries to install software I have not agreed to and I also have NO choice to decline!

    Second you provide software that does not work on my PC and there is no compatiblilty check!

    Third the support could not help and just gave me the usual switch off/de-install the virus scanner and whatever else info.

    Fourth you know about the issue with the WLAN card and there is no solution since 2 upgrade versions at least.

    How am I going to rate the support and the MS software?

    And last but not least after the successful update it FUBARED my NVIDIA GT 640 so I had to re-install the driver since WIN10 did not find it!! Only VGA..

    Do you still wanna know how I would rate your software? Oh yes send me a customer satisfaction survey...

    Was this answer helpful?

    3 people found this answer helpful.
    0 comments No comments
  4. Anonymous
    2018-08-31T23:23:28+00:00

    After six months of purgatory and ISO re-installs, your solution fixed my M11AA Asus box, which I imagine is similar to your CM6870.

    I've posted my experience at http://swandhams.com

    Thank you .

    Was this answer helpful?

    0 comments No comments
  5. Anonymous
    2018-10-14T06:50:20+00:00

    This was a pain for me, so I hope this helps someone.

    I made 15 attempts to update my ASUS CM6870 from the Windows 10 Anniversary Edition to the Creators Edition (Creators Update), I *always* hung hard around 40 or 42% after the first system reboot, with the 'rolling' animation ground to a halt. This almost always points to a hardware problem.

    I did everything to find the bad hardware! I disconnected all of the USB, ripped out all of the superfluous drivers, did a clean reboot, did a driver uninstall on my NVIDIA drivers using DDU, and uninstalled every program that had a funky driver like the VMWare standalone converter and my Cisco Anyconnect VPN. Nothing worked.

    Each reboot reported "0xc1900101 - 0x30018 the installation failed in the FIRST_BOOT phase with an error during SYSPREP operation"

    Digging into the clues from files left behind in C:$WINDOWS.~BT\Sources\Panther, I saw that the last thing before failure was a bunch of SPPNP messages which seems to be the SYSPREP driver loading phase. There were also a bunch of <NUL> characters at the end of the file. Some piece of hardware was refusing to play nice. I had painstakingly removed everything I could without opening the case.

    Finally, based on various hints on forums, I cracked open the PC and pulled out my PCIe wireless card. Boom. Fully installed.

    The Wireless card was a PCIe x1 in a PCI x16 slot if that matters, and it was the ASUS branded MediaTek Railink technologies RT3090 wireless card.

    (PCI\VEN_1814&DEV_3090&SUBSYS_760111AD&REV_00)

    Once the Creators Update was installed, I was able to reinstall the card without incident. Go figure.

    Edit: This problem probably applies to any system using a P8H61 or P8H77 motherboard. According to this thread, the P8H77-M PRO (CM6870) is affected, as are other ASUS desktops like the ASUS CM6730 with a P8H61‑M PRO with that RT3090 wireless card.

    Other commenters report that the ROG CG6480 / TYTAN CG8480 and CM1855 are also affected, presumably also with the errant RT3090 card.

    I also observed the problem with an Ascend Ascendtech WN7601R-H1 PCI card in HP desktops. This is also an RT3090 PCIe card.

    Commenter Chris Deer reports that he also had the problem with the Acer L4610, L4620, and L480, possible other Acer "L" models.

    The Fall Creators Edition and April 2018 update also have this problem, so the installer is not yet fixed to place nice with the RT3090 wireless card.

    One commenter noted that moving the card from a PCIx16 slot to a PCIx4 slot also fixed the problem, so it may be an interaction between the card and the northbridge (motherboard chipset) in certain slots.

    EDIT: WARNING: Be careful removing and re-inserting the wireless card; make sure the power cord is removed from the power supply. The sound card chip is right at that slot and I damaged it, so now my system no longer recognizes when speakers are attached. Looks like I scratched a trace on the motherboard.  I know it is a hardware problem because booting a Linux Live USB showed the same problem. 

    I had read this post before !!! I would have saved 2 years of problems with cumulative updates and new releases, until 1803 that there was no way to install. Which clean boot? and various artifices? proposed by microsoft? My solution was Ubuntu until yesterday October 13th 2018 that I read this.

    I removed the damn board and installed 1809 in 20 minutes !!!

    Thank you thank you thank you I will be eternally grateful, trying to disclose as much as possible the "cure".

    I'm Italian, the translation is google.

    Was this answer helpful?

    3 people found this answer helpful.
    0 comments No comments