Windows Update Doesn't Work even with the SOLUTION

Anonymous
2016-10-23T00:11:52+00:00

FIRST. If Windows Update is not working or taking far too long (more than 15 to 30 minutes) try the Solution described in the thread at

http://answers.microsoft.com/en-us/windows/forum/windows_7-update/windows-7-update-solution/f39a65fa-9d10-42e7-9bc0-7f5096b36d0c

If after trying this the problem persists, then follow these directions to first reset Windows Update.

This is a bit technical, but if you can follow it, I think it will work for you.  I work on a lot of computers and this works for me.

I emphasize that for this to work, you must follow exactlyas this describes.

There are two main types of Windows 7 installations: 32 bit or 64 bit.  You need to know what is installed in your computer.  Click the Start globe, type system in the box. Choose System information in the list.  The techie shorthand for 32 bit is x86 and for 64 bit is x64

  1. Start Windows Update and change the Setting to Never check for updates.  Restart.  When you do leave the setting at NEVER, Windows Update will no longer be automatic.  From this point onwards, you are responsible for starting and installing updates.  We recommend you do that a few days following the 2nd Tuesday each month.
  2. The process starts by ensuring that there is nothing running that will prevent the update from working properly.  Click on the Start globe and type services into the text box.  Click on Services in the list that pops up.  In the window that then pops up (its alphabetic), find Windows Update.  Right-click on it (left-click if your mouse is set for left-handers) and choose Stop.

Now, you are going to reset Windows Update components:

Start, All Programs, Accessories, Right-click on Command prompt, Choose Run as administrator, OK.  Type the following in the black box:

  1. net stop wuauserv
  2. net stop cryptSvc
  3. net stop bits
  4. net stop msiserver
  5. ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
  6. ren C:\Windows\System32\catroot2 catroot2.old
  7. net start wuauserv
  8. net start cryptSvc
  9. net start bits
  10. net start msiserver
  11. Exit

Tip: Instead of typing each line, you can select the text in each line in the list by high-lighting it, right-click, choose Copy from the pop-up menu.  In the black window, Right-click anywhere, choose Paste from the pop-up menu, Enter.

If steps 5 or 6 do not allow the operation, go back and click on the Start globe and type services into the text box.  Click on Services in the list that pops up.  In the window that then pops up (its alphabetic), find Windows Update.  Right-click on it (left-click if your mouse is set for left-handers) and choose Stop.  It may have re-started itself.

If steps 5 and 6 report that the file already exists, then substitute SoftwareDistribution.old2 for SoftwareDistribution.old, and catroot2 catroot2.old2 for catroot2 catroot2.old

This procedure will erase the list you would see in "View Update history" that you access in the Windows Update window.  It will NOT erase the "View Installed Updates" you access through the Control Panel.

You are now going to download and install either one or two updates manually.  In most cases only the first (KB3172605) of these is needed.  If that produces a result that says the update is not appropriate for you computer, you need to first install the 2nd of these (KB3020369), then install the first (KB3172605).  Choose the one that is for your machine — 32 bit (X86) or 64 bit (X64).

KB3138612 :

32 bit

 https://www.microsoft.com/en-us/download/details.aspx?id=51208

64 bit

https://www.microsoft.com/en-us/download/details.aspx?id=51212

KB3020369:

32 bit

https://download.microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.msu

64 bit

https://download.microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.msu

After restarting your computer, wait about 10 minutes until Windows Update completes its tasks.  Do not use the computer for any other purpose during this wait period.

Start Windows Update.  It will take only a few minutes to come up with a list and download the updates you select.  The process is quite normal as it always was from this point onward.

If your computer has not been updated for a long time, it may take longer.

Windows for home | Previous Windows versions | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

160 answers

Sort by: Newest
  1. Anonymous
    2016-11-18T13:13:25+00:00

    KB3020369 isn't enough. You need KB3172605.

    Regards, VZ

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2016-11-18T12:47:12+00:00

    Please, firstly I'm no expert.  But my computer started to fail a couple of weeks ago.  I backed up everything, again, since I always do and from my originally created Packard Bell restore discs,  did a CLEAN install.

    Here I am like you.  Stuck. I've managed to install KB3020369 & 7.6.7600.320 Update agent.  The restore discs did put on the original configuration so there are some KBs from 2012.   So will reinstallation solve this issue?

    The System shows me I have SP1

    I really don't know whether I'm suffering the same problem as everyone or I have corrupt discs :(

    Same problem being the constant searching for updates & getting no where, despite running with no other programmes over 6-8 hours.  Although with the help of this forum did manage KB3020369

    I have to say, once my machine get to about 4 years old (purchased Jan 2013) I know they are on their last legs and I have purchased another.  So I'm trying to save the old one for the Grand children when they visit to keep them off mine!

    I got rather over familiar with messing with the Update configuration, trying to stop the damned Win10 from installing automatically and put some of my issues of failure of the machine down to that, resulting to turning off the machine in order to stop it, on occasions. 

    Microsoft YOU OWE ME :(

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2016-11-14T14:39:57+00:00

    The only thing I can think of is the possibility that you are using the wrong version -- 32 vs 64 bit?

    Was this answer helpful?

    0 comments No comments
  4. Anonymous
    2016-11-14T14:20:47+00:00

    Hey CT, still having the issue with my one system.  I have gone through your fix multiple times to no avail.

    i run through the commands as admin, run the updates....KB3020369 is already installed, so I try KB3172605 and get this message EVERYTIME!!!!!!!

    Short of rebuilding the system, which I don't want to do as it has very complicated software installs, is there ANYTHING ELSE that can help?  I also tried the manual fix on the other thread, but that proved to be unsuccessful as well.

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments
  5. Anonymous
    2016-11-11T04:42:10+00:00

    Thank you for reminding me that we are no in the days of Window 98. I was simply pointing to the fact that when one backed up the registry in windows 98 the entire registry was backed up by default ; in Windows XP only one Key was backed up by default also that in Windows 98 and  Windows searched for any good copy it could find  if the original was bad.

    I would rather use the command line but being unsure of what might happen should hte command line execute incomplete by some fluke I will edit the registry. I am assuming that I should do steps 1-12 after deleting the AU or does it matter.

    You might also want to follow my discussion concerning the forced windows 10 upgrade at

    http://answers.microsoft.com/en-us/windows/forum/windows\_7-update/windows-7-forced-upgrade-to-windows-10/6e23a842-d474-490d-91fc-e47caa47e346

    Was this answer helpful?

    0 comments No comments