KB3033929 fails to install and cause a minor "infinite" loop

Below is an extract of the CBS log file after a KB3033929 manual installation failure.  With my limited knowledge, it appears it fails to copy (C:\Windows\boot\PCAT\bootmgr) to the System Reserve partition which when I installed Windows 7, created a 100 MB partition.  I believe the error 0x70

indicates there is no space available on the partition. 

This may the reason some Windows 7 updates fail the KB3033929 installation, while some have no problem.

Can you or anyone shed any light on the log entries and how I might fix the problem, or is this a M/S problem caused by installing Window 7 SP1 and only creating a 100 MB partition that should have been larger?  Is there a way I can expand the partition size without destroying my Windows 7 system ?

CBS LOG FILE EXTRACT:

BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 60 of 60) Last Error = 0x70BFSVC:

Error copying boot files from C:\Windows\boot\PCAT to \\?\GLOBALROOT\Device\HarddiskVolume1\Boot! Last Error = 0x70"][gle=0x80004005]

2015-03-20 14:34:01, Info                  CSI    0000002c Calling generic command executable (sequence 2): [24]"C:\Windows\fveupdate.exe"

    CmdLine: [35]""C:\Windows\fveupdate.exe" /memtest"

2015-03-20 14:34:01, Info                  CSI    0000002d Done with generic command 2; CreateProcess returned 0, CPAW returned S_OK

    Process exit code 0 resulted in success? TRUE

    Process output: [l:248 [248]"BitLockerUpdate: Running.BitLockerUpdate: Service request is for memtest.exe.BitLockerUpdate: BitLocker Drive

Encryption is not turned ON on the OS volume.BitLockerUpdate: No servicing was performed on the OS volume.BitLockerUpdate: Done."]

2015-03-20 14:34:01, Info                  CSI    0000002e@2015/3/20:19:34:01.770 CSI Advanced installer perf trace:

CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};Microsoft-Windows-BootEnvironment-Core-MemoryDiagnostic, Version = 6.1.7601.18741, pA =

PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral,

PublicKey neutral;34776454

2015-03-20 14:34:01, Error      [0x018007] CSI    0000002f (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-

794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109).  Failure will not be ignored: A rollback will be initiated after all the operations in the

installer queue are completed; installer is reliable (2)[gle=0x80004005]

Based on the results of my CBS.log file, I decided to spend some time to re-visit this issue today.  My failure seems to point to the update being unable to write a file to the system reserve partition as it was full.  It was set up for 100 MB when I installed Windows 7.  Using Partition Wizard (free), I expanded the system reserve partition from 100 MB to about 400 MB.  I again ran the manual installation file for KB3033929 and it installed without any problems.

After it was completed, I again plugged in my second HD with Windows XP, reset my boot loader with EasyBCD and all is now back to normal with dual boot menu to either Windows 7 or Window XP.

Finally....hope this might work for others that are having a problem.

Finally was able to break the loop and access bios.  Changed boot order to cd/dvd first.  This allowed me to boot from a system disk.  I ran the repair and it said it could not repair the error but allowed me to do a controlled shut down.  Started system and it booted normally.  Immediately created a Windows repair disk.

Thanks for assistance!

None of the previous solutions worked for me.

The error in the CBS.log file was -

BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume4\Boot\bootmgr) failed! (Attempt 1 of 60) Last Error = 0x70

My problem was that the hidden 100MB "System Reserved" partition was full.

Kaspersky Internet Suite was the culprit!!

I found a program that could delete files in the hidden partition -

http://www.coderforlife.com/projects/win7boot/extras/#OpenHiddenSystemDrive

that allowed the Hidden "System Reserved" partition  to be seen in Windows Explorer and I deleted all the Kaspersky files freeing up 72MB.

The update then installed correctly.

We also ran into this issue...dual boot with Kali Linux and Windows 7 on one of our few office desktops that still have MS Windows running...banged my head against it for a couple of hours.  Even worse if you're migrating off the Windows platform and thus don't boot into windows that often.

The solution appears to be to remove the dual boot, install the patch, then reset the bootable flag of your linux partition; depending on how one has partitioned their drives, this could be as simple as changing boot priority in the BIOS or as difficult as disabling grub, then booting with a *nix rescue USB and reenabling grub.  

However, this was the last straw for us (Win8 was what got us migrating away from Microsoft operating systems in the first place), so we're not even going to bother with trying to fix it.

I removed the single dead RAM Module.

And its dual RAM partner.

I purchased a new Coin-Batt  CR2032

The computer Booted--and the OS was already installed.

===

It was updated--

I needed to use my SP-1 DVD update that I purchased from MS.

WUS...Windows[tm] Update Service--was malfunctioning.

===

I contacted MS Support.

...and after a discussion...

WUS...came back online.

===

I am now waiting for new RAM for a complete install.

Its a Win 7 PC desktop

Core 2 Duo

MS Security Essentials

===

Having read many comments of this order.

I think your computer might be a piece of junk.