'Battery Alert' appears before the 'press 'ESC' key for Start-up menu.', however, ' Cooling Fan Alert' appears after 'press 'ESC' key for Start-up menu.'

Thanks a lot,

1- IF Coffee filter, Thermal Material Remover, and Thermal Surface Purifier)  Only used for removing and preparing the surface of the CPU and Heat sink, there are no other uses for Item 1, 3 and 4., then this would be not well- spent money since I only would use these items one time. Also, the same for Isopropyl alcohol.

Do you suggest any other items, even if they are traditional(not ad-hoc material) , can be available anywhere instead of those items.?

2- Why do I buy the heatsink which sold for**$18 as long as its image indicates a rubber pad, even if it is not better than others sold more than $26.**

Also, my rubber pad can no longer be used since if it removed from my old heatsink, then it will not never be stuck on the new one heatsink since its adhesive will be lost.

Thanks a lot,

Note, I have not yet purchased any of these products.

I understand from your speech, that all these products:

 Isopropyl alcohol (#2), and  Items number 3 and 4 and coffee filter are used to clean the old thermal compound(remains). There are no other benefits/users for  them.

I only would use to remove old thermal compound for one time. So, there too much of product(material) of each product above will be left. So, where  can I use it ?

Only used for removing and preparing the surface of the CPU and Heat sink, there are no other uses for Item 1, 3 and 4.  Isopropyl alcohol other uses are: https://en.wikipedia.org/wiki/Isopropyl_alcohol  

5- I know how to contact a seller at eBay.com by clicking on the seller's name shown under each item, however, I really don't find a way to contact a seller at Amazon.com since there is no sellers' names shown under items at Amazon.com.

Amazon is the seller unless it specifically list that item is sold by .. "the seller's name and link to their web site".

7- could you please reply to this point below:

Yes, my fan has rubber pad(screen shot below is for my fan/heatsink)

However, the first screen shot  of the heatsink posted before is sold for $18.

However, other heatsinks having the same replace part numbers, such as the second screen shot posted before is sold for more than **$26,**such as the second screen don't have the pad in clear view.

I don't think that the heatsink sold for $18 is better than others sold more than $26.

I have done

Zoom in on the photos from both suppliers

(Copy and paste both to a folder) and open / view each photo using Microsoft's Paint.exe and you can see it's a rubber pad.

However, pad is still not clear.

"Can you reuse your rubber pad if the one you purchase does not come with the pad?"  Yes / No?

I have not yet purchased any fan/heatsink at all, but I only copied those images for heatsink from amazon.com and eBay.com. The one sold for $18 has a clear rubber pad image. However, all the others more expensive don't have.

And as you said I don't think that the heatsink sold for $18 is better than others sold more than $26.

Then if it does not come with the rubber pad, reuse your rubber pad!

Could you please confirm my points below:

1- you used Isopropyl alcohol (#2), and Items number 3 and 4  only to remove the old thermal, do  you think this is redundant, and a was a waste of money.

No as item 3 and 4 are very costly, so I remove as much of the old thermal paste as possible. Then I use items 3 and 4 to remove what may be nearly invisible to my or your eyes the very thin film that may still be on the surface.

2- Coffee filter can only be used to do this action or it has other benefits/uses., if have other uses could you give me a link of a good kind of Coffee filter at amazon.com or eBay.com

http://www.amazon.com/Melitta-Single-Coffee-Filters-60-Count/dp/B00911474E/ref=sr_1_41?s=kitchen&ie=UTF8&qid=1446597645&sr=1-41&keywords=coffee+filter

3- Items number 3 and 4 and Isopropyl alcohol, all could only use to remove the old thermal compounds, or I can use them to clean the notebook screens. If no, then I would not always remove thermal compound(only one time I would do, so what I would do for the remains).

Do not use items 2, 3, or 4 to clean the screen, may damage the surface !

4- Could you please give me a link of a good kind of Isoproply alcohol at amazon.com or ebay.com

Amazon: http://www.amazon.com/Swan-Isopropyl-Alcohol-99%25-Pint/dp/B001B5JT8C/ref=sr_1_1?s=hpc&ie=UTF8&qid=1446597851&sr=1-1&keywords=isopropyl+alcohol

5- I know how to contact a seller at eBay.com by clicking on the seller's name shown under each item, however, I really don't find a way to contact a seller at Amazon.com since there is no sellers' names shown under items at Amazon.com.

Thanks a lot,

Note, I have not yet purchased any of these products.

I understand from your speech, that all these products:

 Isopropyl alcohol (#2), and  Items number 3 and 4 and coffee filter are used to clean the old thermal compound(remains). There are no other benefits/users for  them.

I only would use to remove old thermal compound for one time. So, there too much of product(material) of each product above will be left. So, where  can I use it ? 

5- I know how to contact a seller at eBay.com by clicking on the seller's name shown under each item, however, I really don't find a way to contact a seller at Amazon.com since there is no sellers' names shown under items at Amazon.com.

7- could you please reply to this point below:

Yes, my fan has rubber pad(screen shot below is for my fan/heatsink)

However, the first screen shot  of the heatsink posted before is sold for $18.

However, other heatsinks having the same replace part numbers, such as the second screen shot posted before is sold for more than **$26,**such as the second screen don't have the pad in clear view.

I don't think that the heatsink sold for $18 is better than others sold more than $26.

I have done

Zoom in on the photos from both suppliers

(Copy and paste both to a folder) and open / view each photo using Microsoft's Paint.exe and you can see it's a rubber pad.

However, pad is still not clear.

Can you reuse your rubber pad if the one you purchase does not come with the pad?

I have not yet purchased any fan/heatsink at all, but I only copied those images for heatsink from amazon.com and eBay.com. The one sold for $18 has a clear rubber pad image. However, all the others more expensive don't have.

And as you saidI don't think that the heatsink sold for $18 is better than others sold more than $26.

Could you please confirm my points below:

1- you used Isopropyl alcohol (#2), and Items number 3 and 4  only to remove the old thermal, do  you think this is redundant, and a was a waste of money.

No as item 3 and 4 are very costly, so I remove as much of the old thermal paste as possible. Then I use items 3 and 4 to remove what may be nearly invisible to my or your eyes the very thin film that may still be on the surface.

2- Coffee filter can only be used to do this action or it has other benefits/uses., if have other uses could you give me a link of a good kind of Coffee filter at amazon.com or eBay.com

http://www.amazon.com/Melitta-Single-Coffee-Filters-60-Count/dp/B00911474E/ref=sr_1_41?s=kitchen&ie=UTF8&qid=1446597645&sr=1-41&keywords=coffee+filter

3- Items number 3 and 4 and Isopropyl alcohol, all could only use to remove the old thermal compounds, or I can use them to clean the notebook screens. If no, then I would not always remove thermal compound(only one time I would do, so what I would do for the remains).

Do not use items 2, 3, or 4 to clean the screen, may damage the surface !

4- Could you please give me a link of a good kind of Isoproply alcohol at amazon.com or ebay.com

Amazon: http://www.amazon.com/Swan-Isopropyl-Alcohol-99%25-Pint/dp/B001B5JT8C/ref=sr_1_1?s=hpc&ie=UTF8&qid=1446597851&sr=1-1&keywords=isopropyl+alcohol

5- I know how to contact a seller at eBay.com by clicking on the seller's name shown under each item, however, I really don't find a way to contact a seller at Amazon.com since there is no sellers' names shown under items at Amazon.com.

Most items on Amazon are sold or fulfilled directly by Amazon.

6- I can find thermal compound brand you used at amazon.com or eBay.com as well?

http://www.amazon.com/Thermaltake-Extreme-Performance-Heatsink-CL-O004-GROSGM-/dp/B00O5VX6O2/ref=sr_1_2?ie=UTF8&qid=1446598302&sr=8-2&keywords=Thermaltake+Thermal+paste

7- could you please reply to this point below:

Yes, my fan has rubber pad(screen shot below is for my fan/heatsink)

However, the first screen shot  of the heatsink posted before is sold for $18.

However, other heatsinks having the same replace part numbers, such as the second screen shot posted before is sold for more than $26, such as the second screen don't have the pad in clear view.

I don't think that the heatsink sold for $18 is better than others sold more than $26.

I have done

Zoom in on the photos from both suppliers

(Copy and paste both to a folder) and open / view each photo using Microsoft's Paint.exe and you can see it's a rubber pad.

However, pad is still not clear.

Can you reuse your rubber pad if the one you purchase does not come with the pad?

3- What material do you use to clean the old fan? You use Isopropyl alcohol- 99%???

First I use #1 Coffee filter in my screen shot and apply a small amount of Isopropyl alcohol (#2) to the filter and use it to remove the old thermal paste from both the heat sink and CPU.

The I use #3 (Thermal Material Remover) and apply a small amount to another Coffee filter to remove any remaining thermal past from the CPU and heat sink.

Next I use #4 (Thermal Surface Purifier)  and apply a small amount to another Coffee filter to prepare the CPU and heat sink. Then I apply the new thermal paste.

Items number 3 and 4 in my screen shot were purchased from Amazon, scroll down read the product description as posted on Amazon's web site:http://www.amazon.com/ArctiClean-60ml-Kit-30ml/dp/B0007TOR08/ref=sr_1_1?ie=UTF8&qid=1443896029&sr=8-1&keywords=Thermal+heatsink+cleaner

Thanks a lot,

First of all, I am very very upset that I live in a county out of commerce since I have been looking for fan heatsink, and other parts for my notebook for about a year. But they are not available in Yemen.  I contact the HP support team in the closer country to me, which is United Arab Emirates.  But they told me they cannot be able to help me by shipping the spare parts I need. Also, since not all sellers can ship to Yemen. Also, Items shipped to Yemen right now, even in fine conditions, get stolen or lost in the Yemen customs. I only would try to find a way or ask a seller at any online seller website if he/she can ship to a third party shipping address, such as Saudi Arabia. Then, I would use an shipping address  of friend of mine residing in Saudi Arabia.

Could you please confirm my points below:

1- you used Isopropyl alcohol (#2), and Items number 3 and 4  only to remove the old thermal, do  you think this is redundant, and a was a waste of money.

2- Coffee filter can only be used to do this action or it has other benefits/uses., if have other uses could you give me a link of a good kind of Coffee filter at amazon.com or eBay.com

3- Items number 3 and 4 and Isopropyl alcohol, all could only use to remove the old thermal compounds, or I can use them to clean the notebook screens. If no, then I would not always remove thermal compound(only one time I would do, so what I would do for the remains).

4- Could you please give me a link of a good kind of Isoproply alcohol at amazon.com or ebay.com

5- I know how to contact a seller at eBay.com by clicking on the seller's name shown under each item, however, I really don't find a way to contact a seller at Amazon.com since there is no sellers' names shown under items at Amazon.com.

6- I can find thermal compound brand you used at amazon.com or eBay.com as well?

7- could you please reply to this point below:

Yes, my fan has rubber pad(screen shot below is for my fan/heatsink)

However, the first screen shot  of the heatsink posted before is sold for $18.

However, other heatsinks having the same replace part numbers, such as the second screen shot posted before is sold for more than $26, such as the second screen don't have the pad in clear view.

I don't think that the heatsink sold for $18 is better than others sold more than $26.

I have done

Zoom in on the photos from both suppliers

(Copy and paste both to a folder) and open / view each photo using Microsoft's Paint.exe and you can see it's a rubber pad.

However, pad is still not clear.