Cant backup 8.1 using system image backup! Error 0x80780119, Cant optimise system partition, (this is why i cant backup) please read. . .

Anonymous
2013-10-19T14:16:48+00:00

I am having this issue, cant optimise the system partition 350mb. 8.1 official release,

This is also causing a huge problem, the optimise option in windows 8.1 allows me to optimise the c: drive but not the system partition this prevents a system image backup...!!

Due to the system partition being out of space for a shadow copy to be placed onto it the backup fails every time with this error code, -- 0x80780119 --.

Backups are a huge factor in operating systems and since upgrading I cant backup my system using windows image backup, if I could optimise the system partition and straighten out the file structure within it (free up some space) for the shadow copy then the volume shadow copy could be placed onto the drive but it cant...

This all worked fine in 8.0 but not now...please fix this problem!?

Not being able to backup your system is not good enough...

here is my my issue again in pictures...

1.system volume needs optimising

but pressing the optimise for this does nothing at all.. current status remains "Needs optimisation".

The way an ssd reclaims drive space is to use the optimise function, this not working prevents the reclaim for files/data to be written to space where files have been deleted previously. Giving the impression the drive/partition is full when really its not full just needs optimising/trimmed.

 

  1. initiate the system image backup

  1. both volumes to be backed up

  1. error message due to insufficient space on the system partition for shadow copy. 

 

  1. finally here is a capture of the current disk setup on my system, notice the system partition only has 17mb free space and according to the above error message I need atleast 50mb free for the volume shadow copy !? Due to this I cant create a backup of my system using windows 8.1 !

(system partition has no drive letter assigned to it 350mb)

PLEASE HELP !! Thanks for reading.

Windows for home | Previous Windows versions | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2013-10-20T20:19:10+00:00

I have found a way around this getting Windows System Image Backup working again. I did this on my laptop and desktop confirming that I could recover from the images. It is actually pretty easy but should not be necessary. The reason that the backup would not work was because the recovery partition was using 284MB of the 300MB available. There was not 50MB available for shadow copy. Here are the steps I took on an EUFI GPT disk:

Note: All commands are without quotes. 

Disclaimer: I would recommend backing up all of you important data as any time you mess with partitions, there is the possibility to lose data. This process was done one both my laptop (Win8.1 Home) and desktop (Win8.1 Pro). I cannot take responsibility if this causes any damage. With that being said, I hope this helps.

Download and install MiniTool Partition Wizard http://www.partitionwizard.com/free-partition-manager.html Note that none of the changes will take effect until you hit apply. I am sure others may work but this is the one that I used and it is free. 

You should have 3 Windows partitions; Recovery - 300 MB, EFI System - 100 MB, and your system Volume to start off with. 

  1. Once installed, Open Partition Wizard and Shrink your system volume, C: in my case, by 101MB at the beginning of the partition. (I had to put 101MB as when I tried 100 it said that the space was too small when doing the next step) To do this, Right Click the C: Drive, select, Move/Resize, and the put 101 in box named "Unallocated Space Before:" and click OK.
  2. Copy the EFI System partition (100 MB FAT32) to this new Free Space by right clicking, selecting copy, and then selecting the unallocated space. Then next the OK.
  3. Delete the 100MB EFI System Partition after the Recovery Partition. 

After this is done, you will see 100MB unallocated space after the Recovery Partition. 

  1. Right click on Recovery partition and select Extend. Drag the bar to take up all of the extra free space. This will change the recovery partition from 300MB to 400MB allowing for enough space (50MB) for the shadow copy. Click OK. 
  2. Next Click Apply. I received an error stating that it could not make changes due to C: being in use. I clicked restart. 

When the computer restarts, Partition Wizard will do its thing. Once it is done you should boot into Windows again.

This next part is essential, because, windows now does not recognize the partition that was moved before as an EFI System Partition. If you try and do a backup image now, only the system partition will show and not the Recovery or EFI System

  1. Open a cmd prompt with administrator privileges. Press Start Key, Type cmd, right click, select run as administrator. 
  2. Type diskpart to start windows command line disk manager. 
  3. Find the disk that Windows is installed on by typing List disk. This will be different on each machine but for illustration mine was disk 0
  4. Select that disk by typing the command "select disk" and the disk number.
  5. Next, determine the EFI partition that was moved earlier. This is the partition that was moved earlier and should be 100MB. Type in the command "list part" to see a list of the partitions on the disk. Mine was Partition 3. This may be different on your system. 
  6. Once you have determined the partition number, type "select partition " and your partition number
  7. Next you have to set this partition as an EFI System volume. Type in this command - "set id = c12a7328-f81f-11d2-ba4b-00a0c93ec93b" This changes the partition type to an EFI system volume.
  8. After all of this is done, restart your computer and you should now be able to back up you system using the System Image Backup in File History.

I know some of this may seem a little elementary to some but you never know who needs help and their technical knowledge. 

I hope that this helps and let me know if you have any questions.

Was this answer helpful?

10+ people found this answer helpful.
0 comments

778 additional answers

Sort by: Oldest
Most helpful Newest Oldest
  1. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.

    Comments have been turned off. Learn more

  2. Anonymous
    2013-11-17T08:13:23+00:00

    My experience: I have no more issue with W8.1 system image backup (W8.1 system image creation tool, never a third part involved).

    Very simple solution in my case , using MiniTool Partition Wizard (freeware).

    1- Checking the partition that lacks unused space which makes Backup impossible as you know. In my case, W8.1 created a second recovery partition (350 MB)  having less that 50 MB unused.

    2- Caution : ascertain that you have created W8.1 recovery USB keys.

    3- Formatting the involved partition (the 350 MB recovery partition in my case ). NB I don't know what would happen if formatting the first (unique for some of yours) recovery partition. (I bet it would work too)

    My involved partition (2nd recovery) still grow from time to time, by steps of 25/30 MB !!! (seemingly when backing up, not sure). Then will need to get formatted again some day.

    Hope this will help.

    Equipment : ACER aspire V3 772-G (i7, lot of RAM and a main 256 GB Samsung 840PRO SSD + a data 750 GB WD including a partition of 100 GB designed for system image backup.

    Was this answer helpful?

    0 comments
  3. Anonymous
    2013-11-17T08:54:20+00:00

    I tried as described in **KB 274831**by Microsoft to create  a "custom system image" using the recimg command with alleviated cmd. 

    Result: It does NOT work with Windows 8.0. This is what you when you use "rcimg" with Windows 8.1 with the elevated cmd:  

    I guess it's exactly the same issue. The system is attempting to create the snapshot at the recovery partition - which does not have enough space.

    Microsoft seems to ignore this issue, that is probably because they don't know how to fix it. But it is shocking when you get from them a supposed work around that is neither working. This is indicating that they do not understand their own product.

    Was this answer helpful?

    0 comments
  4. Anonymous
    2013-11-17T09:13:51+00:00

    Tried it as well, from Asus UX31A 256 GB SSD to an external Seagate 3TB USB 3.0 HD and it worked.

    Was this answer helpful?

    0 comments