Cant backup 8.1 using system image backup! Error 0x80780119, Cant optimise system partition, (this is why i cant backup) please read. . .

Anonymous

I am having this issue, cant optimise the system partition 350mb. 8.1 official release,

This is also causing a huge problem, the optimise option in windows 8.1 allows me to optimise the c: drive but not the system partition this prevents a system image backup...!!

Due to the system partition being out of space for a shadow copy to be placed onto it the backup fails every time with this error code, -- 0x80780119 --.

Backups are a huge factor in operating systems and since upgrading I cant backup my system using windows image backup, if I could optimise the system partition and straighten out the file structure within it (free up some space) for the shadow copy then the volume shadow copy could be placed onto the drive but it cant...

This all worked fine in 8.0 but not now...please fix this problem!?

Not being able to backup your system is not good enough...

here is my my issue again in pictures...

1.system volume needs optimising

but pressing the optimise for this does nothing at all.. current status remains "Needs optimisation".

The way an ssd reclaims drive space is to use the optimise function, this not working prevents the reclaim for files/data to be written to space where files have been deleted previously. Giving the impression the drive/partition is full when really its not full just needs optimising/trimmed.

initiate the system image backup

both volumes to be backed up

error message due to insufficient space on the system partition for shadow copy.

finally here is a capture of the current disk setup on my system, notice the system partition only has 17mb free space and according to the above error message I need atleast 50mb free for the volume shadow copy !? Due to this I cant create a backup of my system using windows 8.1 !

(system partition has no drive letter assigned to it 350mb)

PLEASE HELP !! Thanks for reading.

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

Answer accepted by question author

Anonymous

I have found a way around this getting Windows System Image Backup working again. I did this on my laptop and desktop confirming that I could recover from the images. It is actually pretty easy but should not be necessary. The reason that the backup would not work was because the recovery partition was using 284MB of the 300MB available. There was not 50MB available for shadow copy. Here are the steps I took on an EUFI GPT disk:

Note: All commands are without quotes.

Disclaimer: I would recommend backing up all of you important data as any time you mess with partitions, there is the possibility to lose data. This process was done one both my laptop (Win8.1 Home) and desktop (Win8.1 Pro). I cannot take responsibility if this causes any damage. With that being said, I hope this helps.

Download and install MiniTool Partition Wizard http://www.partitionwizard.com/free-partition-manager.html Note that none of the changes will take effect until you hit apply. I am sure others may work but this is the one that I used and it is free.

You should have 3 Windows partitions; Recovery - 300 MB, EFI System - 100 MB, and your system Volume to start off with.

Once installed, Open Partition Wizard and Shrink your system volume, C: in my case, by 101MB at the beginning of the partition. (I had to put 101MB as when I tried 100 it said that the space was too small when doing the next step) To do this, Right Click the C: Drive, select, Move/Resize, and the put 101 in box named "Unallocated Space Before:" and click OK.
Copy the EFI System partition (100 MB FAT32) to this new Free Space by right clicking, selecting copy, and then selecting the unallocated space. Then next the OK.
Delete the 100MB EFI System Partition after the Recovery Partition.

After this is done, you will see 100MB unallocated space after the Recovery Partition.

Right click on Recovery partition and select Extend. Drag the bar to take up all of the extra free space. This will change the recovery partition from 300MB to 400MB allowing for enough space (50MB) for the shadow copy. Click OK.
Next Click Apply. I received an error stating that it could not make changes due to C: being in use. I clicked restart.

When the computer restarts, Partition Wizard will do its thing. Once it is done you should boot into Windows again.

This next part is essential, because, windows now does not recognize the partition that was moved before as an EFI System Partition. If you try and do a backup image now, only the system partition will show and not the Recovery or EFI System

Open a cmd prompt with administrator privileges. Press Start Key, Type cmd, right click, select run as administrator.
Type diskpart to start windows command line disk manager.
Find the disk that Windows is installed on by typing List disk. This will be different on each machine but for illustration mine was disk 0
Select that disk by typing the command "select disk" and the disk number.
Next, determine the EFI partition that was moved earlier. This is the partition that was moved earlier and should be 100MB. Type in the command "list part" to see a list of the partitions on the disk. Mine was Partition 3. This may be different on your system.
Once you have determined the partition number, type "select partition " and your partition number
Next you have to set this partition as an EFI System volume. Type in this command - "set id = c12a7328-f81f-11d2-ba4b-00a0c93ec93b" This changes the partition type to an EFI system volume.
After all of this is done, restart your computer and you should now be able to back up you system using the System Image Backup in File History.

I know some of this may seem a little elementary to some but you never know who needs help and their technical knowledge.

I hope that this helps and let me know if you have any questions.

0 comments

778 additional answers

Anonymous

2014-02-21T02:08:48+00:00

Your problem is not related to the volume shadow creation space restriction error. If I were to speculate, it looks like there some third party software drivers that do not have certificates or proper permissions is the problem. The built-in hidden "system" user has full access rights and an administrator has sufficient privileges to start the image recovery program and it's dependent users. I don't believe you (administrator) would need to add the "Backup Operator" user account to yourself. If you could identify specifically which drivers are the culprit, then maybe you could check/set the security settings. The only thing I could think of would be a clean install with drivers that are certified.
Was this answer helpful?

0 comments No comments
Anonymous

2014-02-20T20:07:23+00:00

I also use Macrium to backup my system disc, in fact I have done so for several years now, and have never bothered with Microsofts recovery. I have been following this thread since its beginning, because since I upgraded to Windows 8.1 I now get the following error twice with every Macrium backup;

Log Name:      Application

Source:        Microsoft-Windows-CAPI2

Date:          20/02/2014 5:01:14 p.m.

Event ID:      513

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      Antec

Description:

Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.

Details:

AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.

System Error:

Access is denied.

.

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

<System>

    <Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />

    <EventID Qualifiers="0">513</EventID>

    <Version>0</Version>

    <Level>2</Level>

    <Task>0</Task>

    <Opcode>0</Opcode>

    <Keywords>0x8080000000000000</Keywords>

    <TimeCreated SystemTime="2014-02-20T04:01:14.768032800Z" />

    <EventRecordID>5874</EventRecordID>

    <Correlation />

    <Execution ProcessID="388" ThreadID="4008" />

    <Channel>Application</Channel>

    <Computer>Antec</Computer>

    <Security />

</System>

<EventData>

    <Data>

Details:

AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.

System Error:

Access is denied.

</Data>

</EventData>

</Event>

I've tried the suggestions in this thread for overcoming the recovery image problem in the hope that it might cure the above error, but it didn't.

Searching through other forums reveals that the CAPI2 error has been around for several previous Windows versions, but never appeared on my system until Windows 8.1. Windows 8 never produced the error. I've tried all of the suggested fixes for this error but none have worked, and I can't find out where the files referred to are located so that I can check the access permissions.

I would be interested to know if others following this thread who use Macrium, or for that matter Paragon, Symantec, or Acronis, software, all of which produce the same error on my PC and laptop, in fact Paragon generates 6 per backup, are experiencing the same error.

All Macrium backups verify as OK, which raises the question, is the reported error anything to bother about, or even a genuine error.
Was this answer helpful?

0 comments No comments
Anonymous

2014-02-20T14:06:11+00:00

Moving and copying and deleting and setting id of the partitions is too daunting a task. Using Macrium, I cloned my disk to a WD Passport. I then tried moving/re-sizing the partitions using Partition Wizard. The EFI System partition cannot be moved (it must be copied, then delete the old one and "set id = c12a7328-f81f-11d2-ba4b-00a0c93ec93b" for the new one). So, I'm giving up and going to use Macrium as my Image backup choice.

I agree with other posters that Microsoft should find a way to fix this. Other software companies can create image backups without all these issues ... why can't Microsoft?

Thanks to everyone for their help and support.
Was this answer helpful?

0 comments No comments
Anonymous

2014-02-19T17:00:21+00:00
Yes. On all systems with UEFI/GPT since disks are large and have plenty of space even if one is using SSD's they could have made these partitions 2Gb to avoid the space restriction/availability problems. Even windows setup either retail new or online/local upgrade could detect existing GPT partitions and their ID's using them instead of ignoring and creating new ones. Every time I build a system with 8.1 & UEFI bios I am going to have to deal with this to make windows image backup to work. It would be nice for Microsoft to create a "fix it" program to clean up unneeded partitions resize and position them. It would be easier to fix it post install by booting USB offline into a Hirens boot disk but I have yet to find or create one that will boot on UEFI systems. HBCD PE environment ahs partition wizard as part of the tools to do the work off line and then I could use Diskpart to reestablish the ID's in this same off line environment.

I got the order backwards above when listing the partitions on a retail new drive install. 8.1/UEFI

Typically Disk 0
1. Windows (Recovery Partition) - DE94BBA4-06D1-4D40-A16A-BFD50179D6AC
2. System (EFI System) - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
3. MSR (GPT Reserved) - E3C9E316-0B5C-4DB8-817D-F92DF00215AE
4. Basic Data (Windows/Data) - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
I then create another partition at the end of Disk 0 or when possible use another physical disk (Disk 1) to use for image and data storage (this partition/physical disk is not included in the image creation) I pre create the folder "WindowsImageBackup" and make it hidden, windows will still use this folder for the image and helps prevent tampering.
Was this answer helpful?

0 comments No comments