BUG: CHKDSK stuck at 11% for hours, but was actually working

in reply to Mike Gyt  9/25.16  Quot " Just to make sure that all issues are found and dealt with, run a check disk scan first, by typing in the command

chkdsk C: /scan

and pressing the Enter key. As it scans, it will fix anything that it can without being offline. Once that is finished, type in the command

chkdsk C: /spotfix

and press the Enter key. You’ll see the command prompt tell you that it, “…cannot run because the volume is in use by another process.” It will then ask you if you, “Would… like to schedule this volume to be checked the next time the system restarts? (Y/N)” Type Y and press Enter to schedule Check Disk. Now, restart your computer.

This time Check Disk will run and fix any problems that were identified in the scan. Because it’s only fixing those specific problems, the process only takes a few seconds to a few minutes." Unquote 

IT ALSO  WORKS PERFECTLY IN WINDOWS 10.

This is faster because it isn't doing the same thing. It can only scan part of the drive, as noted, and then it spotfixes what it found.The problem is that it didn't scan a large portion of the drive, so it just completely ignores that portion, errors and all.

But every time you start your PC now its going to go to CHKDDSK an you will have to hit Esc or a Key any-key to Stop it, every time you turn it on, or re-boot, restart.

 You must let it complete! Do this when you have the time to just let it run it's scan, even if video timer is locked at 10%,

11%, 13% etc. this freeze up of the video timer means nothing most cases, but not all mind you. But I recommend letting it run for at-least 6 Hours for even a fast PC an even longer, like 10, 12, maybe even 24 hours on some older processors, machines, PC's .

I also have had this problem with CHKDSK /r an it run to 10% an Hangs I've Killed it several times after about 4or 5 hours, An it didn't fix the problems, one of which my CD/DVD Drive is gone, I've went so fare as to set a new Reg Key an still it's missing, an stuck on 10% at DISK SCAN off line = chkdsk  /r Freezes at 10% But this time I started it late at night so I could let it run all night if needed started around 8pm an it rebooted or at-least looked like it had finished

It just suddenly jumped from 10% to 100% around 4AM an rebooted its self, It didn't change anything still runs like sht

an the DVD is still missing, I've also noticed power surges on this Windows 10 to I think it blew out my 32 inch TV Monitor while running a game on DVI plugin, wow not sure of the security of this windows 10 to, so I'm going to get rid of Microsoft once an for all from my Life Windows 8 - 8.1 & 10 especially, I'm so done working for Microsoft for free.

PS This will take time, an I may calm down by then ? FRUSTRATED! Have a Good Day an as always Good Luck

I don't think, it was hanging... Was there any activity on the disklamp? If there is one on the computer. You know, when working normally on a computer, it only blinks now and then, but when installing updates, or is doing harder things, it's flashing much, or even lights constantly. When I "run" chkdsk /F /R, the disklamp is lightning constantly at the 11 %, and then suddenly restarts normally.

I miss the black screen with the white text, which tells me, how long it has gone....

My friend's Inspiron 14, 6 month old, was booting to windows for more than 5 minutes and takes almost same amount of time to go to the desktop and the same time before you can open any program. 

I run CHKDSK /F /R and after 11 hours it was still stuck in 11%. I click on CTRL+SHFT+DEL and it went to "Scanning and repairing drive (C:): 100% complete but stuck there now for 10 minutes. 

Should I hard reboot it already or should I wait?