Device driver was not successfully installed (no driver found) on Windows 7 x64

Anonymous
2014-07-23T15:44:09+00:00

I have had this problem for quite some time now, but tried to fix it on and off.

I knew I had problems with USB devices. Not even a standard keyboard will install.

Here is what I have found out:

I have a standard keyboard which I have used on this computer before.

Now it ONLY works if I plug it into the port I installed it on originally.

ALL other USB ports fail.

I then started trying moving other devices around.

They all ONLY work in the ports they were installed on originally.

ALL report a "no driver found" message when trying to use another port.

I then decided to check with a webcam that I never installed on this computer.

It fails on ALL ports.

So it's not only one port or one device.

I now want to move a 3TB harddisk from another computer of mine.

I have a USB3.0 dock that I KNOW supports 3TB drives as it already run one, but on another pc.

On this one I get the same error as in the title, no matter what port I try.

I then decided to pull the drive from the USB dock and mount it internally.

It STILL gives the above error as shown here:

It's almost as if Windows have lost ALL drivers for ALL devices??!?

I have tried the following:

commandline as admin > SFC /SCANNOW

That reports that eveything is fine.

I ran CHKDSK on all drives

No errors.

I tried running the following antispyware:

superantispyware

Malwarebytes Anti-Malware

AdwCleaner

CCleaner

All gives a clean bill of health.

I read other people went into the device manager and deleted all the USB devices, so I tried that.

That made my mouse and keyboard die. Forced shutdown. Boot.

Then Windows showed me I needed USB drivers, but I could not get them as mouse and keyboard didn't work.

I had to boot on my Recovery Disc, and do a system restore.

I don't know if it's any help but I have this from an attempt to run a repair:

I am really getting deperate.

Oh, as a sidenote. Reinstalling/resetting Windows is NOT an option!

Windows for home | Previous Windows versions | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

54 answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2014-09-24T10:50:58+00:00

    Insert your Kingston Data Traveller into a USB port. Are you able to view what is stored on the Kingston Data Traveller?

    Select Start, Control Panel, Device Manager, Portable Devices, Kingston, Driver tab and Driver details. Do you see these two drivers? Wpdfs.dll and wudfrd.sys?

    When you remove your Kingston Data Traveller from a USB port do you always use the Safe Remove procedure before removal?

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments
  2. Anonymous
    2014-09-20T23:52:25+00:00

    I found 2 interesting log files. They are both in "%systemdrive%\Windows\inf"

    "setupapi.app.log"

    "setupapi.dev.log"

    After finding those I decided to try the following:

    1. Plug in my camera, and uninstalled it from the device manager, so it was totally gone (it was shown as unknown).
    2. Deleted the log files.
    3. Selected "Scan for hardware changes".
    4. Saved the 2 log files to this zip file: http://snowmans.dk/tmp/auto.zip
    5. Deleted the 2 logs,
    6. Did a MANUAL install pointing to "C:\WINDOWS\SYSTEM32\DRIVERSTORE\FILEREPOSITORY".
    7. Saved the 2 log files to this zip file: http://snowmans.dk/tmp/manual.zip

    I hope they can be used to help me further in this matter.

    With reference to previous post, then I have this:

    Aside from the ususal files then I also added the 2 setupapi logs in case they can tell you something

    I have uploaded updated files here:

    http://snowmans.dk/tmp/Events.zip

    http://snowmans.dk/tmp/SysInfo.txt

    http://snowmans.dk/tmp/setupapi.zip

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments
  3. Anonymous
    2014-08-10T21:05:30+00:00

    Have you installed the chipset drivers for your motherboard?

    http://www.gigabyte.com/products/product-page.aspx?pid=4001#dl

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments
  4. Anonymous
    2014-08-04T16:06:48+00:00

    As you say your Model ST2000DL003-9VT166 ATA Device is not an external USB drive. The Seagate link I provided contained CC32 firmware for the drive. Are you saying that you already have CC32 installed?

    http://knowledge.seagate.com/articles/en_US/FAQ/218171en

    Was this answer helpful?

    0 comments
  5. Anonymous
    2014-08-04T13:35:18+00:00

    I checked for firmware update for the Seagate drive, and according to Seagate there is no new firmware available. I am puzzled however, as you say the drive is a USB device. It is an internal SATA drive.

    Regarding the HS-SD/MMC USB Device, when I remove it and reboot, it gets reinstalled, so all I can do is to disable it in the manager, as it's a device built into my monitor. I need the monitor's USB hub as it's the only one that delivers enough power to keep my wireless headset running, so unplugging it is not an option. The thing is, I have been running Windows 7 x64 with this exact hardware setup for about a year, and it's only gone wrong within about 2 months. Before then everything worked.

    Was this answer helpful?

    0 comments