ntoskrnl.exe BSOD

Hi,

Sorry to see that your last thread went unanswered by me, it must have gotten lost in my subscriptions!

We still have the same bug check - SYSTEM_SERVICE_EXCEPTION (3b).

Before running a Memtest, because this looks like a hardware issue at this point, I'd like to be sure we're not dealing with a driver causing corruption. Let's go ahead and enable Driver Verifier as I recommended in the previous thread:

Driver Verifier:

What is Driver Verifier?

Driver Verifier is included in Windows 8, 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.

Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver if it detects a violation.

Before enabling Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point

Windows 7 - START | type create | select "Create a Restore Point"

Windows 8 - http://www.eightforums.com/tutorials/4690-restore-point-create-windows-8-a.html

How to enable Driver Verifier:

Start > type "verifier" without the quotes > Select the following options -

1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following boxes -

• Special Pool
• Pool Tracking
• Force IRQL Checking
• Deadlock Detection
• Security Checks (Windows 7 & 8)
• DDI compliance checking (Windows 8)
• Miscellaneous Checks

4. Select  - "Select driver names from a list"
5. Click on the "Provider" tab. This will sort all of the drivers by the provider.
6. Check EVERY box that is [B]NOT[/B] provided by Microsoft / Microsoft Corporation.
7. Click on Finish.
8. Restart.

Important information regarding Driver Verifier:

• If Driver Verifier finds a violation, the system will BSOD.
• After enabling Driver Verifier and restarting the system, depending on the culprit, if for example the driver is on start-up, you may not be able to get back into normal Windows because Driver Verifier will flag it, and as stated above, that will cause / force a BSOD.

If this happens, do not panic, do the following:

• Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.
• Once in Safe Mode - Start > Search > type "cmd" without the quotes.
• To turn off Driver Verifier, type in cmd "verifier /reset" without the quotes.

・    Restart and boot into normal Windows.

If your OS became corrupt or you cannot boot into Windows after disabling verifier via Safe Mode:

• Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.
• Once in Safe Mode - Start > type "system restore" without the quotes.
• Choose the restore point you created earlier.

How long should I keep Driver Verifier enabled for?

It varies, many experts and analysts have different recommendations. Personally, I recommend keeping it enabled for at least 24 hours. If you don't BSOD by then, disable Driver Verifier.

My system BSOD'd, where can I find the crash dumps?

They will be located in %systemroot%\Minidump

Any other questions can most likely be answered by this article:

http://support.microsoft.com/kb/244617

Regards,

Patrick

No BSOD after enabling verifier and restarting. So what is the likely hardware culprit?

Please download and run Driver View and upload a copy of the report it produces to your Sky Drive. To get a report on all drivers select Edit, Select All followed by File, Save Selected Items.

http://www.nirsoft.net/utils/driverview.html

Please provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key (alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed. You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode. The request for a copy of this file is additional to answering the question about make and model.

For help with Sky Drive see paragraph 9.3:

http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm

Keep verifier enabled for at least 48 hrs. If you don't crash, hardware is likely the issue, yes. At that point, we're going to want to go ahead and run a Memtest for NO LESS than ~8 passes (several hours):

Memtest86+:

Download Memtest86+ here:

http://www.memtest.org/

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:

http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

Regards,

Patrick

No blue Screens in 48 hours , although I did have a random crash/freeze my screen looked like static. So where should I go from here.