Wi-Fi (off) and can't be enabled

Anonymous

I have had my laptop for 3 months, and wi-fi just stopped working today. I cannot turn it back on. The laptop came pre-installed with Windows 8. It is a Gateway NV52L15u.

The wi-fi icon in the tray has a red "x" and says "no connections are available." In PC Settings, it says "Wi-Fi (Off)" and the option to turn it on is greyed out and cannot be selected. If I run the Troubleshooting wizard for the network adapter it tells me to "use the switch on the front or the side of the computer, or the function keys... to enable wireless capability." The laptop does not have a physical switch, and pressing the wi-fi function key on the keyboard only toggles Airplane Mode on or off.

Laptop re-starts have not fixed the issue. I have run the laptop with battery and with AC power, but this has made no difference either. When I open Device Manager, there are no issues. All the network adapters are "working properly." I have tried un-installing and re-installing the wireless adapter driver, but this has not changed anything. I even tried replacing the wi-fi network card with a known-good card from another laptop - the wi-fi issue on the Windows 8 laptop was not fixed and the software behavior did not change (with the minor exception that the network adapter changed to a different make and model).

I am out of things to try. I have ruled out faulty hardware being the issue, therefore, it appears to be Windows 8 software related. Any suggestions would be welcome.

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

Answer accepted by question author

Anonymous

Hi Nathan,

Welcome to Microsoft Community Forums.

Based on the description, it appears that you are facing issues while connecting to Wi-Fi as you are getting an error message "no connections are available". I will definitely help you in fixing this issue.

Have you made any changes on the computer prior to this issue?

Method 1: I would suggest you to follow the steps from the and check if it helps.

Why am I unable to see Wi-Fi networks on my Windows 8 notebook?

When you setup your Windows 8 system for the first time, you may notice that Wi-Fi is off when you view Available Networks. If no wireless networks are listed under Wi-Fi, press the F3 key to attempt to turn the wireless on. If you are still unable to see any wireless networks, use the following steps to resolve this issue.

Completely shut down your computer.
Power on the system. As soon as the first logo screen appears, immediately press the F2 key, or the DEL key if you have a desktop, to enter the BIOS.
Press F9 to load Setup Defaults and press Enter.
Press the F10 key to save changes and restart the system. When Windows loads, your wireless networks should now be available.

For reference:

http://gateway-us.custhelp.com/app/answers/detail/a_id/27057/kw/no%20connections%20are%20available/session/L3RpbWUvMTM2MjQ0MjQ1MC9zaWQvWHFCUlZsa2w%3D

Method 2: Once the Wireless network is available, I would suggest you to make the connection automatic and check if it helps.

How to Connect to a Network in Windows 8

http://gateway-us.custhelp.com/app/answers/detail/a_id/26602/kw/connections

Give this a go; I’m confident you will find what you need here. But if you face any further issue please reply to this post and we'll be happy to assist you further.

0 comments

102 additional answers

Anonymous

2013-06-18T06:57:39+00:00
10 Steps to enabled WIFI in WINDOWS 8 when the WIFI button is GRAYED out.
1. Go to SETTINGS
2. Click on CONTROL PANEL
3. Click HARDWARE AND SOUNDS
4. Click on DEVICE MANAGER
5. Expand NETWORK ADAPTER
6. Select WIRELESS LAN 802.11n PCI-E NIC (on my case)
7. Select ADVANCE TAB
8. Select 802.11d
9. On the value select ENABLED then click OK.
Was this answer helpful?

1 person found this answer helpful.

0 comments No comments
Anonymous

2013-05-16T01:55:31+00:00

what is the bios?
Was this answer helpful?

1 person found this answer helpful.

0 comments No comments
Anonymous

2013-05-01T20:23:27+00:00

I finally have a fix for my machine... reset the laptop BIOS.

<for my laptop>

Hit F2 during boot.

in the "Exit" menu, select "Load Setup Defaults"

Now "Exit Saving Changes"

Of course the steps may be different for your machine you mileage may vary.

-Gershon
Was this answer helpful?

1 person found this answer helpful.

0 comments No comments
Anonymous

2013-04-14T20:36:18+00:00

As of last night I am facing this exact issue, which the OP posted but Vijay did not address. (He addressed something entirely different, and basic).

I have been using Win 8 since the preview release. Mostly with no issues and with no issues since the consumer release. That was until I upgraded my network to 802.11AC.

Netgear is currently (And has been) having major issues with the AC Adapter drivers. I wont go into all of the troubleshooting I have done other than to say I have done everything known to man to make this work

After having come up with zero solutions, I uninstalled the adapter and drivers, cleaned the registry, did a complete cleanup, rebooted and attempted to re-install an N adapter.

Win 8 will no longer recognize any adapters. Three separate manufacturers, and they all do the same thing, which relates directly back to the OP.

The driver and software loads properly. But the adapters show up in the Device Manager as unknown hardware (but enabled). In the Network and Sharing Center, no devices show at all, whereas the OP's devices are greyed out, I don't even have that option. They just are not there, period. When attempting to see the driver status in Device Manager, it shows no driver installed, and no drivers available, either on the drive (And the latest drivers are available on my drives) or online of course, because it cannot see online. Any attempt to install a driver, whether standalone or in the software, succeeds, but I end up with the same status as mentioned above. Unknown device, enabled, no drivers. Which of course leaves me with the Not Connected red x icon and no way to enable anything.

I understand what Vijay is saying. The Not connected is also Not connected-No networks are available. However, no Networks are going to be available if your not connected. Which is what the OP is saying and which is what I am saying, bottom line, we (And a lot of other people) are not connected.

To Vijay, or any other MS Tech/Engineer, please address the Network connectivity issue. As that is the real issue and has nothing to do with Networks not being available (In this case).
Was this answer helpful?

1 person found this answer helpful.

0 comments No comments