Event says when my system froze that "The DgiVecp service failed to start due to the following error: The system cannot find the file specified."

Anonymous

I found the exact problem that causes this freezes. My computer freezed today at 20:17. I went to the event viewer and found that at that time there is an event says that "The DgiVecp service failed to start due to the following error: The system cannot find the file specified."

Is there anyone who knows about it?

Thank you.

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

Answer accepted by question author

Anonymous

Hi, Tekinalp67,

Try Gloria's Suggestion from this thread-

http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/error-6008/5a6138d1-e997-4d74-98a4-bb974c4114c1

-Or-

Start > Type Regedit

Press Enter

Navigate to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services

Look for an entry listed as DgiVecp

If you find this, then change the Start data value to 4.

Reboot the system and see if the message is gone.

http://tzatziki-solvedproblems.blogspot.com/2010/02/dgivecp.html

0 comments

Answer accepted by question author

Anonymous

Event ID 6008 - is it still showing up in Event Viewer? Possibilities were heat, video drivers, faulty devices, failing HD's etc

Event ID: 41 Source: Kernel-Power

Source: Kernel-Power
Type: Critical
Description: <br><br>The last sleep transition was unsuccessful. This error could be caused if the system stopped responding failed or lost power during the sleep transition.<br><br><br> <br><br><br>Check for loose connections - did you change power settings to never?<br><br><br>CPU could be overheating<br><br><br>Driver software could be at fault<br><br><br>http://www.eventid.net/display.asp?eventid=41&eventno=9230&source=Kernel-Power&phase=1<br><br><br> <br><br><br> <br><br><br>Boot your system in a clean boot state. When it is up in a clean boot state, activate the sleep mode process. If it has not problems coming out of sleep mode when in the clean boot state, add a few more services back and try the process again. Continue until<br> the issue occurs, then the issue is probably one of the driver's/services that were last enabled that is conflicting with the process sleep undertakes to place the system in sleep mode.<br> <br><br> <br><br>Here are the steps for clean boot; - I recommend updating all drivers and firmware as a step in resolving this as well. <br><br> <br><br>CLEAN BOOT: you can use the steps in the article to narrow down the cause of the problem,http://support.microsoft.com/kb/929135. <br><br>(Step 1 is listed below.) <br><br>Step 1: Perform a clean boot Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We strongly recommend that you do not use the System Configuration utility to modify the advanced<br> boot options on the computer unless a Microsoft support engineer directs you to do this. Doing this may make the computer unusable.<br><br><ol><br><li>Log on to the computer by using an account that has administrator rights. </li><li>Click <strong>Start<br><div><img src="http://support.microsoft.com/library/images/support/kbgraphics/Public/EN-US/VistaStartButton.jpg"></div><br>, type <span>msconfig.exe</span> in the <strong>Start Search box, and then press ENTER to start the System Configuration Utility.<br><br><br><br><div><img src="http://support.microsoft.com/library/images/support/kbgraphics/Public/EN-US/SecurityShield.jpg"></div><br>If you are prompted for an administrator password or for confirmation, type your password, or click<strong>Continue.<br></strong></strong></strong>Regards,<br><br><br><br></li><li>On the <strong>General tab, click <strong>Selective Startup, and then click to clear the<strong>Load startup items check box. (The<br><strong>Use Original Boot.ini check box is unavailable.)</strong></strong></strong></strong></li><li>On the <strong>Services tab, click to select the <strong>Hide all Microsoft services check box, and then click<strong>Disable all.<br><br><br><br><strong>Note</strong> Following this step lets Microsoft services continue to run. These services include Networking, Plug and Play, Event Logging, Error Reporting, and other services. If you disable these services, you may permanently delete all restore points.<br> Do not do this if you want to use the System Restore utility together with existing restore points.</strong></strong></strong></li><li>Click <strong>OK, and then click <strong>Restart.</strong></strong> </li></ol><br><br>http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/cannot-awake-from-sleep/fa423ca9-2412-49b5-9f97-37c43a1419c5

Source: Kernel-Power

Type: Critical

Description: The last sleep transition was unsuccessful. This error could be caused if the system stopped responding failed or lost power during the sleep transition. Check for loose connections - did you change power settings to never? CPU could be overheating Driver software could be at fault http://www.eventid.net/display.asp?eventid=41&eventno=9230&source=Kernel-Power&phase=1 Boot your system in a clean boot state. When it is up in a clean boot state, activate the sleep mode process. If it has not problems coming out of sleep mode when in the clean boot state, add a few more services back and try the process again. Continue until the issue occurs, then the issue is probably one of the driver's/services that were last enabled that is conflicting with the process sleep undertakes to place the system in sleep mode. Here are the steps for clean boot; - I recommend updating all drivers and firmware as a step in resolving this as well. CLEAN BOOT: you can use the steps in the article to narrow down the cause of the problem,http://support.microsoft.com/kb/929135. (Step 1 is listed below.) Step 1: Perform a clean boot Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We strongly recommend that you do not use the System Configuration utility to modify the advanced boot options on the computer unless a Microsoft support engineer directs you to do this. Doing this may make the computer unusable. <ol> <li>Log on to the computer by using an account that has administrator rights. </li><li>Click Start <div><img src="http://support.microsoft.com/library/images/support/kbgraphics/Public/EN-US/VistaStartButton.jpg"></div> , type msconfig.exe in the Start Search box, and then press ENTER to start the System Configuration Utility. <div><img src="http://support.microsoft.com/library/images/support/kbgraphics/Public/EN-US/SecurityShield.jpg"></div> If you are prompted for an administrator password or for confirmation, type your password, or clickContinue. Regards, </li><li>On the General tab, click Selective Startup, and then click to clear theLoad startup items check box. (The Use Original Boot.ini check box is unavailable.)</li><li>On the Services tab, click to select the Hide all Microsoft services check box, and then clickDisable all. Note Following this step lets Microsoft services continue to run. These services include Networking, Plug and Play, Event Logging, Error Reporting, and other services. If you disable these services, you may permanently delete all restore points. Do not do this if you want to use the System Restore utility together with existing restore points.</li><li>Click OK, and then click Restart. </li></ol> http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/cannot-awake-from-sleep/fa423ca9-2412-49b5-9f97-37c43a1419c5

0 comments

80 additional answers

Anonymous

Crash List

Created by using BlueScreenView

Dump File	Crash Time	Bug Check String	Bug Check Code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused By Driver	Caused By Address	File Description	Product Name	Company	File Version	Processor	Crash Address	Stack Address 1	Stack Address 2	Stack Address 3	Computer Name	Full Path	Processors Count	Major Version	Minor Version	Dump File Size
011912-21216-01.dmp	19.01.2012 22:19:10	DRIVER_VERIFIER_IOMANAGER_VIOLATION	0x000000c9	00000000`0000023e \| fffff880`0142c300	fffff980`0bd42ee0 \| 00000000`00000000	dtsoftbus01.sys	dtsoftbus01.sys+1300					x64	ntoskrnl.exe+7cc40					C:\Windows\Minidump\011912-21216-01.dmp	4	15	7601	273.592

0 comments

Anonymous

2012-01-19T20:27:34+00:00

I did these things and at the beginning of the start the computer gives a blue screen. Everytime I tried to open windows it gives it. I started with safe mode and delete the settings.

https://rapidshare.com/files/2798570854/011912-21216-01.dmp

this is the link of the dump file.

Thank you...
Was this answer helpful?

0 comments No comments
Anonymous

2012-01-19T02:23:54+00:00
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://support.microsoft.com/kb/244617

Run the tool and look for Error: DRIVER_VERIFIER_DETECTED_VIOLATION post back report.

Firefox causing BSOD thread - see ZigZag3143's response dated 12/26/2010

here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the 's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

http://www.pchelpforum.com/win-7-vista-bsod/100940-firefox-causing-blue-screen-death.html

You might try Firefox Support

http://support.mozilla.org/en-US/home

http://support.mozilla.org/en-US/kb/Firefox%20crashes
Was this answer helpful?

0 comments No comments