Cannot Change Drive Letter

Anonymous
2009-04-24T12:33:27+00:00

Vita 64 Ultimate. I have an external eSATA unit for backups. Recently got SSD for second drive in my laptop. After formatting, Vista assigned the SSD drive F: which had been being used by the external drive.  Disk Management->Change Drive Letter and Paths->Change Drive Letter returns a Logical Disk Manager error message saying Parameter is Incorrect.  Removing the drive letter appears to work, but rescanning or refreshing Disk Manager causess the letter to reappear.  I need to swap these drive letters.  Can you assist?

Windows for home | Previous Windows versions | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2010-11-17T01:46:44+00:00

ACTUALLY I got it to work, finally.  I am not technical.  So just use minitool partition wizard, found here:

http://download.cnet.com/Partition-Wizard-Home-Edition/3000-2094\_4-10962200.html?tag=mncol;6

  1. open the program, right-click on the drive you want to change
  2. select "change letter"
  3. click the drop down box by "new drive letter"
  4. select the letter you want to change it to
  5. click "ok"
  6. at the bottom left corner of the program click "apply"

and that's how you do it

Was this answer helpful?

50+ people found this answer helpful.
0 comments
Answer accepted by question author
Anonymous
2009-04-25T01:17:05+00:00

Hello kd4wat,

 Thank you for your reply!

 The error "Parameter is Incorrect" is an indication that the drive is in use.  I have added some steps below that I hope will correct your issue.  Please let me know status.

To change the drive letter or paths in Windows Vista, just follow these simple steps:

  1. Right click on Computer and select Manage to open and access Computer Management Console.
  2. Navigate to and expand the Storage section, and click on Disk Management to access Disk Management Console.
  3. Disk Management Console display the details of all available volumes and disk drives in the computer configuration in the right pane.
  4. Right click on the volume or disk drive that you want to change the drive letter, and select “Change Drive Letter and Paths).
  5. Then click on “Change” button.
  6. Use the drop down list to select the new and your desired drive letter to assign to the disk volume.
  7. Click OK.
  8. Click Yes to confirm.

Any letter between C and Z can be assigned to a hard disk drive, CD drive, DVD drive, portable external hard disk drive, or USB flash memory key drive, while floppy disk drives use up letters A and B. Beside, the drive letter for the system volume or boot partition cannot be modified or changed. And if you install some applications or programs in the drive that you have just changed the drive letter, they may not functioning properly after the change due to the possibilities that the programs will also refer to the specific drive letter or original path used when installation as environmental variables.

James Microsoft Answers Support Engineer Visit our Microsoft Answers Feedback Forum and let us know what you think.

Was this answer helpful?

40+ people found this answer helpful.
0 comments

57 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2011-01-19T03:24:24+00:00

    ACTUALLY I got it to work, finally.  I am not technical.  So just use minitool partition wizard, found here:

    http://download.cnet.com/Partition-Wizard-Home-Edition/3000-2094\_4-10962200.html?tag=mncol;6

    1. open the program, right-click on the drive you want to change
    2. select "change letter"
    3. click the drop down box by "new drive letter"
    4. select the letter you want to change it to
    5. click "ok"
    6. in the upper left corner of the program click "apply"

    and that's how you do it

    Thank you very much! This worked perfectly.

    The first answer did not address the issue of not being able to change the drive letter in "Computer Manager" and getting the "Parameter is Incorrect" error. Just tells us how to change the drive letter... which most of us here know and that's when the error is showing.

    It's frustrating that I can perform this task on every other PC that I own or work with but this one PC will not allow me to change the drive letter of ANY external drive that only stores files and is not in use.

    I modified line 6 of your instructions techtechG because the Apply button is in a different location... Maybe this is a newer version.

    Was this answer helpful?

    0 comments
  2. Anonymous
    2010-12-21T18:49:06+00:00

    I used the EASEUS partition manager from download.cnet.com and it worked as well.

    It was on a clients MY Book 1TB drive /w VCD.

    I disable the HDD's VCD but windows 7 would still not let me change drive letter.

    Thanks for the info!!

    Was this answer helpful?

    0 comments
  3. Anonymous
    2010-12-15T04:39:15+00:00

    ACTUALLY I got it to work, finally.  I am not technical.  So just use minitool partition wizard, found here:

    http://download.cnet.com/Partition-Wizard-Home-Edition/3000-2094\_4-10962200.html?tag=mncol;6

    ...

    and that's how you do it

    This worked just fine. "The parameter is incorrect" what the heck is that? :rolleyes:

    Was this answer helpful?

    0 comments