LG DVD-RAM Drive not reading discs in Windows 7

Anonymous
2009-05-16T12:10:01+00:00

Title pretty much sums it up....

I have 7 installed and it's running great!  But if I put anything into the drive to load onto the system it doesn't spin it up.  I can see the drive in My Computer, but it still thinks that CD1 of World of Warcraft is inside of it, but it didn't spin up that disc either.

I had a bunch of things turned off during the install (HyperTransport, IDE, FDD), should I turn everything off again and try to load it up, just to turn it all back on later?  Or is there a known fix?  Exact model is the GH22NS30.


AMD Athlon 64 x2 Dual Core Processor 5400+ Black Edition; Abit AN52 nForce 520 Motherboard; OCZ SLI-Ready Edition 4GB DDR2 (PC2 6400); Western Digital WD360GD 36gb Raptor; Western Digital WD740ADFD 74gb Raptor; LG GH22NS30 DVD-RAM Drive; XfX GeForce 8800GT Alpha Dog Edition

Windows for home | Previous Windows versions | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments
Answer accepted by question author
Anonymous
2009-05-18T21:29:20+00:00

Hi Rustedbucket,

Thanks for posting to the Getting Ready for Windows 7 communtiy forum.

Try deleting the filters in the registry, see if this helps to resolve this.

Remember to backup the registry to external media prior to editting the registry. 

  1. Click Start

Collapse this imageExpand this image

, type regedit in the Start Search box, and then click regedit in the Programs list.

Collapse this imageExpand this image

If you are prompted for an administrator password or confirmation, type your password, or click Continue. 2. Locate, and then click the following registry subkey:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class{4D36E965-E325-11CE-BFC1-08002BE10318}

Caution There can be many instances of the registry subkey that is mentioned in step 2**. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM**. 3. In the right pane, right-click UpperFilters, and then click Delete. 4. Click Yes to confirm the removal of the UpperFilters registry entry. 5. In the right pane, right-click LowerFilters, and then click Delete. 6. Click Yes to confirm the removal of the LowerFilters registry entry. 7. Exit Registry Editor, and then restart the computer.

Please let us know if this assists you or if further assistance is needed involving this issue.

Regards,


Debbie

Microsoft Answers Support Engineer

Visit our Microsoft Answers Feedback Forumand let us know what you think.

Was this answer helpful?

0 comments No comments

71 additional answers

Sort by: Oldest
  1. Anonymous
    2011-11-19T07:46:11+00:00

    Thank you matthew

    I jus posted a thread in the above mentioned forum

    once again thank you!!

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2011-12-23T04:15:09+00:00

    If  drive updates ,drivers , software are installed in safe mode a lot less problems develope.LG knows about  problems in win 7.I got a dvd driver replacement from them.check there web sights.all drives

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2012-07-02T18:43:26+00:00

    I am still looking for a solution or a "known issue" response in regards to LG drives not reading discs under Windows 7.  I have posted on this forum multiple times and have been given suggestions by moderators (all of which I have attempted).

    Please, I still am using a machine that does not have a CD/DVD drive that reads.  Here is a list of EVERYTHING that I have done to rectify the situation (mods, please note that I HAVE attempted the Upper/Lowerfilters fix and that the Upper/Lowerfilter entries DID NOT exist; note that Devcon confirms that the filters do not exist).

    The drive model is:

    LG GH22NS30 Super Multi - DVD±RW (±R DL) / DVD-RAM drive - Serial ATA - 48x (CD) / 16x (DVD) 48x (CD) / 20x (DVD±R) / 12x (DVD-R DL) / 16x (DVD+R DL) 32x (CD) / 6x (DVD-RW) / 8x (DVD+RW) / 12x (DVD-RAM) - Internal - Black

    -- Drive is recognized by Windows 7 (can be seen in Explorer and Device Manager)

    -- BIOS will recognize discs and prompt for booting (should the disc be a boot disc)

    -- I have tried removing the Upper and LowerFilters in the registry; NEITHER value existed when I searched for them

    -- I have uninstalled the drive, both physically and via device manager

    -- I have run Devcon to determine the parameters of the drive; this is the resulting information:

    IDE\CDROMHL-DT-ST_DVD-RAM_GH22NS30_________________1.02____\5&F23758A&0& 1.0.0Name: HL-DT-ST DVD-RAM GH22NS30 ATA DeviceSetup Class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROMControlling Service:cdrom1 matching device(s) found.

    -- Have verified that both the power and data cables ARE seated properly

    -- Have updated the firmware (from version 0 to 1, and then 1 to 2); issues existed in every firmware upgrade


    AMD Athlon 64 x2 Dual Core Processor 5400+ Black Edition; Abit AN52 nForce 520 Motherboard; OCZ SLI-Ready Edition 4GB DDR2 (PC2 6400); Western Digital WD360GD 36gb Raptor; Western Digital WD740ADFD 74gb Raptor; LG GH22NS30 DVD-RAM Drive; XfX GeForce 8800GT Alpha Dog Edition

    Hi,

    After sifting through every possible website and trying every "solution" I decided to try something else and it worked for me. By the way I have a GH22NS70 on Windows 7 64bit and have done exactly like you did.

    The solution for me was to change the Sata port on my Motherboard. I have a Gigabyte board with 6 standard ports and 2 additional ports which are hooked up to a Gigabyte controller. After changing the Sata port my Drive worked without any problems (and in AHCI mode as well)

    Hope this will help some people having this problem...

    Was this answer helpful?

    0 comments No comments
  4. Anonymous
    2013-03-06T23:22:18+00:00

    I tried pretty much everything listed here, still no luck.

    Personally, I was able to resolve the issue by replacing the IDE Cable. I've never actually had one go bad, but this solved my issue.

    Hope it helps someone.

    Was this answer helpful?

    0 comments No comments